Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. AudioControl Store
  3. Discontinued AudioControl Car Audio & Electronics
  4. Discontinued AudioControl Car Amplifiers
  5. Discontinued AudioControl Class-D Amplifiers

Discontinued AudioControl Class-D Amplifiers

Experience cutting-edge sound with AudioControl's Class-D amplifiers, designed for superior efficiency and performance.

Filters
AudioControl ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

AudioControl ACM-1.300

300W RMS Class D ACM Series Compact Monoblock Car Amplifier with AccuBass

ACM-1.300 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl ACM-1.300

300W RMS Class D ACM Series Compact Monoblock Car Amplifier with AccuBass

• 175 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier

VIP Star Icon

VIP Product Get $25.90 in rewards to spend later

3

• 175 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier

AudioControl LC-1.1500

1500W Peak (850W RMS) Class D LC Series Monoblock Car Amplifier

LC-1.1500 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl LC-1.1500

1500W Peak (850W RMS) Class D LC Series Monoblock Car Amplifier

• 850 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 2 ohm Stable Monoblock Amplifier

VIP Star Icon

VIP Product Get $69.90 in rewards to spend later

3

• 850 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 2 ohm Stable Monoblock Amplifier

AudioControl ACM-4.300

300W RMS Class D ACM Series 4-Channel Compact Full Range Car Amplifier

ACM-4.300 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl ACM-4.300

300W RMS Class D ACM Series 4-Channel Compact Full Range Car Amplifier

• 50 watts x 4 channel @ 4 ohm
• 75 watts x 4 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

VIP Star Icon

VIP Product Get $33.10 in rewards to spend later

1

• 50 watts x 4 channel @ 4 ohm
• 75 watts x 4 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

AudioControl The Epicenter 1200

1200W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

TheEpicenter1200 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl The Epicenter 1200

1200W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

• RMS: 400W x 1 @ 4 ohm, 750W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 12.00" L x 2.10" H

• RMS: 400W x 1 @ 4 ohm, 750W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 12.00" L x 2.10" H

AudioControl ACM4300 (Open Box, Complete)

300W RMS ACM Series 2 ohm Stable 4-Channel Class-D Amplifier

ACM-4.300 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl ACM4300 (Open Box, Complete)

300W RMS ACM Series 2 ohm Stable 4-Channel Class-D Amplifier

• 50 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 2 @ 2 ohm
• 150 Watts RMS x 2 @ 4 ohm, Bridged
• Small Footprint for Flexible Mounting
• AccuBASS and GTO Signal Sense Built In
• Linkwitz-Riley Crossover
• Aluminum Heatsink
• Dimensions: 9.4" W x 3" L x 1.75" H

1

• 50 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 2 @ 2 ohm
• 150 Watts RMS x 2 @ 4 ohm, Bridged
• Small Footprint for Flexible Mounting
• AccuBASS and GTO Signal Sense Built In
• Linkwitz-Riley Crossover
• Aluminum Heatsink
• Dimensions: 9.4" W x 3" L x 1.75" H

AudioControl ACM2300 (Open Box, Complete)

300W RMS ACM Series 2 ohm Stable 2-Channel Class-D Amplifier

ACM-2.300 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl ACM2300 (Open Box, Complete)

300W RMS ACM Series 2 ohm Stable 2-Channel Class-D Amplifier

• 75 Watts RMS x 2 @ 4 ohm
• 150 Watts RMS x 2 @ 2 ohm
• 300 Watts RMS x 1 @ 4 ohm
• Small Footprint for Flexible Mounting
• AccuBASS and GTO Signal Sense Built In
• Linkwitz-Riley Crossover
• Aluminum Heatsink
• Dimensions: 9.4" W x 3" L x 1.75" H

• 75 Watts RMS x 2 @ 4 ohm
• 150 Watts RMS x 2 @ 2 ohm
• 300 Watts RMS x 1 @ 4 ohm
• Small Footprint for Flexible Mounting
• AccuBASS and GTO Signal Sense Built In
• Linkwitz-Riley Crossover
• Aluminum Heatsink
• Dimensions: 9.4" W x 3" L x 1.75" H

AudioControl The Epicenter 1200 (Open Box)

1200W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

TheEpicenter1200 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl The Epicenter 1200 (Open Box)

1200W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

• RMS: 400W x 1 @ 4 ohm, 750W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 12.00" L x 2.10" H

• RMS: 400W x 1 @ 4 ohm, 750W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 12.00" L x 2.10" H

AudioControl The Epicenter 600

600W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

TheEpicenter600 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl The Epicenter 600

600W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

• RMS: 200W x 1 @ 4 ohm, 350W x 1 @ 2 ohm, 600W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 9.00" L x 2.10" H

2

• RMS: 200W x 1 @ 4 ohm, 350W x 1 @ 2 ohm, 600W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 9.00" L x 2.10" H

AudioControl D-5.1300

1300W RMS Class D D-Series 5-Channel Car Amplifier with Digital Signal Processor and Smart App Support

D-5.1300 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl D-5.1300

1300W RMS Class D D-Series 5-Channel Car Amplifier with Digital Signal Processor and Smart App Support

• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 200 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 1300 watts
• Class D 2 ohm Stable 5-Channel-Channel Amplifier

VIP Star Icon

VIP Product Get $88.90 in rewards to spend later

1

• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 200 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 1300 watts
• Class D 2 ohm Stable 5-Channel-Channel Amplifier

AudioControl LC-6.1200

1200W RMS Class-D LC Series 6-Channel Car Amplifier with AccuBass

LC-6.12000 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl LC-6.1200

1200W RMS Class-D LC Series 6-Channel Car Amplifier with AccuBass

• 125 watts x 6 channel @ 4 ohm
• 200 watts x 6 channel @ 2 ohm
• Bridged: 400 watts x 3 channel @ 4 ohm
• Total RMS Power: 1200 watts
• Class D 2 ohm Stable 6-Channel-Channel Amplifier

VIP Star Icon

VIP Product Get $79.65 in rewards to spend later

5

• 125 watts x 6 channel @ 4 ohm
• 200 watts x 6 channel @ 2 ohm
• Bridged: 400 watts x 3 channel @ 4 ohm
• Total RMS Power: 1200 watts
• Class D 2 ohm Stable 6-Channel-Channel Amplifier

AudioControl D-4.800

800W RMS Class D D-Series 4-Channel Car Amplifier with Digital Signal Processor

D-4.800 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl D-4.800

800W RMS Class D D-Series 4-Channel Car Amplifier with Digital Signal Processor

• 125 watts x 4 channel @ 4 ohm
• 200 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 4-Channel Amplifier
• Built-in DSP (Digital Signal Processor)

VIP Star Icon

VIP Product Get $64.90 in rewards to spend later

6

• 125 watts x 4 channel @ 4 ohm
• 200 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 4-Channel Amplifier
• Built-in DSP (Digital Signal Processor)

AudioControl The Epicenter 600 (Open Box)

600W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

TheEpicenter600 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl The Epicenter 600 (Open Box)

600W RMS Monoblock Epicenter Series Class D Amplifier w/ The Epicenter Bass Restoration Built-In

• RMS: 200W x 1 @ 4 ohm, 350W x 1 @ 2 ohm, 600W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 9.00" L x 2.10" H

• RMS: 200W x 1 @ 4 ohm, 350W x 1 @ 2 ohm, 600W x 1 @ 1 ohm
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 9.00" L x 2.10" H

EXCLUSIVE

413Watt (Dyno Certified) JL Audio + AudioControl Digital Bass Restored Combo

JL Audio 12W3v3-2 12" W3v3 Series Subwoofer Driver + AudioControl The Epicenter 600 Monoblock Epicenter Series Class D Amplifier

The-Epicenter600-12W3v3-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

413Watt (Dyno Certified) JL Audio + AudioControl Digital Bass Restored Combo

JL Audio 12W3v3-2 12" W3v3 Series Subwoofer Driver + AudioControl The Epicenter 600 Monoblock Epicenter Series Class D Amplifier

• Dyno RMS: 413W x 1 @ 2 ohm
• Claimed: 350W x 1 @ 2 ohm
• Sensitivity: 87.15 dB
• Mounting depth: 6.65 "
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 9.00" L x 2.10" H

47

• Dyno RMS: 413W x 1 @ 2 ohm
• Claimed: 350W x 1 @ 2 ohm
• Sensitivity: 87.15 dB
• Mounting depth: 6.65 "
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• THE EPICENTER® Digital Bass Restoration Built-in
•MILC™ Maximum Input Level Control
• Line-Level RCA Inputs and Active Speaker-Level Inputs)
• ACR-3 Remote Control Included
• 7.95" W x 9.00" L x 2.10" H

 
    Clear all
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2014 Ford Explorer

    2008 MINI Cooper

    1988 Chevrolet Astro

    2002 Mitsubishi Eclipse

    2010 Ford Flex

    2011 Subaru Outback

    1996 Toyota Previa

    2022 Audi e-tron S Sportback

    2012 BMW 528i xDrive

    2009 Ford Escape

    Vehicle
    Store     Delete

    2024 Can-Am Defender MAX DPS

    2018 Polaris Ranger EV

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2014 Explorer
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo