Precision Power PPI S760.4 Sedona 760W 4-Channel Amplifier

Precision Power PPI S760.4

760W Sedona Series 4-Channel Amplifier

760W Sedona Series 4-Channel Amplifier

• 760W Max
• 190W x 4-Chan @ 2 Ohms
• 120W x 4-Chan @ 4 Ohms
• IDI Intelligent Distress Indicator
• Tri-Mode Capable
• Soft Start Turn-On
• Platinum-Plated Terminals

We apologize

This item has been discontinued

DESCRIPTION
Precision Power (PPI)

Authorized dealer

  • Sedona Series 4-Channel Class A/B Amplifier
  • RMS Power Rating:
    • 4 ohms: 120 watts x 4 chan.
    • 2 ohms: 190 watts x 4 chan.
    • Bridged, 4 ohms: 380 watts x 2 chan.
  • Max power output: 760 watts
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Selectable bass boost (0, 6, 12 dB at 50 Hz)
  • Soft Start Turn-on
  • Tri-mode capable
  • 4/3/2 Channel operation
  • Speaker-level inputs with signal sensing for automatic turn-on
  • IDI Intelligent Distress Indicator
  • 3-Way System Protection circuitry (thermal, impedance, and speaker short protection)
  • Heavy duty brushed aluminum alloy heatsink for maximum heat dissipation
  • Platinum-plated RCA level inputs
  • Platinum-plated screw terminals
  • Input sensitivity:
    • Level: 200mV-6V
  • Variable high-pass filter (15-4,000 Hz, 12 dB/octave)
  • Variable low-pass filter (50-4,000 Hz, 12 dB/octave)
  • Damping factor: >181
  • Stereo Separation: 47 dB
  • Frequency response: 10-39,000 Hz
  • Dimensions: 19-1/8"L x 9-1/2"W x 2-3/8"H
  • 4-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty
FEATURES & SPECS
Power Specifications - Full Range Channels
RMS Power @ 4 ohms
120 watts x 4 channels
RMS Power @ 2 ohms
190 watts x 4 channels
RMS Power @ 1 ohm
Not Stable
Bridged RMS Power
380 watts x 2 channels
Power Specifications - Full Range Channels
Peak Power @ 4 ohms
Peak Power @ 2 ohms
Peak Power @ 1 ohm
Bridged Peak/Max Power
Power Specifications - Subwoofer Channel
Peak Power @ 4 ohm
Peak Power @ 2 ohms
Peak Power @ 1 ohm
Amplifier Specifications
Amplifier Series
Sedona (Precision Power)
Marine Certified
Amplifier Class
AB
Number of Channels
4
Total Peak Power Output
760 watts
Total RMS Power Output
480 watts
Maximum Input Gauge Size
4 AWG
Minimum Impedance Unbridged
2 ohms
Minimum Impedance Bridged
4 ohms
THD at Rated RMS Power
0.03%
Speaker Level Inputs
Yes
Preamp Outputs
No
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
15 - 4,000 Hz
Low-Pass Crossover Frequency
50 - 4,000 Hz
Signal-to-Noise Ratio
100 dB
Channel Separation
47 dB
Bass Boost
0 - 12 dB
Bass/Gain Remote
No
Fan Cooled
No
Fuse Rating
30A x 3 
Total Fuse Rating
CEA-2006 Compliant
No
Sonic Certified Amplifier
Amp Bluetooth Connectivity
Hi-Res Certified
Authorized Dealer
Authorized Dealer
What is in the box?
WITB: Amplifiers
Other Accessory #1
Other Accessory #2
Other Accessory #3
Other Accessory #4
Other Accessory #5
Paperwork
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer
VIDEOS AND HOW - TO
REVIEWS
Precision Power PPI S760.4

Precision Power PPI S760.4

4.5

(2)

Write a review

Overall rating distribution

5 star
50%
4 star
50%
3 star
0%
2 star
0%
1 star
0%

By feature average rating

Durability
5
Value
5
Features
4.5
Design
5
Usability
5

1970playa

June 26, 2013

Amazing Product

Bought this amp for my daughter's vehicle. It has an abundant amount of power without taking too much space from the vehicle. The amp was shipped and delivered in two days which was most impressive. I highly recommend this amp as well as the seller.

20

found this helpful.

dlc

June 11, 2013

not a single issue!

Well worth the money. Drove from Detroit to Virginia beach. They were warm but did not over heat.

12

found this helpful.
ACCESSORIES
TRENDING SIMILAR 4-CHANNEL AMPLIFIERS

Best selling similar products

NVX MVPA4 4-Channel Amplifier + Free Pure OFC Copper 8 Gauge Installation Kit

• The size of a postcard with 400 Watts True RMS Output!
• • MVP Series 4-Channel Micro Class D Amplifier
• 50W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!
• 8 Gauge 4-Channel Complete Amplifier Installation Kit
• For Car Audio Systems Up To 600 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 4-channel RCA Interconnect Cable

(116)

$314.99

Cerwin Vega B54 + Belva 4 Gauge Amp Kit

• RMS: 80 Watts x 4 @ 4 ohms, 150 Watts x 4 @ 2 ohms, Bridged: 300 Watts x 2 @ 4 ohm
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High Density Aluminum Alloy Chassis
• Dimensions: 4.02" W x 8.70" L x 1.40" H

(48)

$339.99

Autotek MM4020.4 (MM40204)

• 500 Watts Max x 4 @ 4 ohms
• 1000 Watts Max x 4 @ 2 ohms
• 2000 Watts Max x 2 @ 4 ohms
• Total Peak Power: 4000 Watts
• High and Low Pass Filters
• 0-9dB Bass Boost
• Aluminum Heatsink

$122.99

Autotek MM1620.4

• 200 Watts RMS x 4 @ 4 ohms
• 400 Watts RMS x 4 @ 2 ohms
• 800 Watts RMS x 1 @ 4 ohm Mono Bridged
• Low Pass, High Pass and Full Filters
• 0 to 9dB Bass Boost
• Heavy duty aluminum alloy heat-sink
• 4/3/2 channel operation

(2)

$69.99

Kenwood KAC-D3104

• 4 ohms: 50 watts x 4 chan.
• 2 ohms: 75 watts x 4 chan.
• Total Peak Power: 600 Watts
• Speaker Level Input
• Signal Sensing Turn-On
• Variable Low Pass/High Pass Filter
• Variable Bass Boost: 0 to +18 dB bass boost at 40 Hz

(2)

$199.99

RECENTLY VIEWED ITEMS

We value your experience

600W Class FD 4-Channel GM Digital Series Amplifier

(360)

$209.99

520W RMS (Dyno Tested at 554W RMS) iON Series Class D Full-Range Digital Stereo Bridgeable 4-Channel Motorcycle Car Amplifier

(18)

$116.99

6.5" 2-Way db Series Component Car Audio Speaker System (Marine Certified)

(105)

$99.99

6.5" 2-Way Type-R Series Component Car Audio Speaker System

(62)

$184.95

6" x 9" 2-way Component Speakers System

(7)

$69.99

Single-Din In Dash DVD Car Stero w/ Bluetooth and 7" LCD Touchscreen Display

(36)

$299.99

250W 6.5" 2-Way Chaos Series Coaxial Speakers w/ Polymide Tweeters

(51)

$32.99

150W Peak (75W RMS) 1" Poly Dome Tweeters

(6)

$11.99

500 watts, Class D Monoblock Amplifier

(6)

$219.99

Searches Related to the Precision Power (PPI) S760.4
ITEM DETAILS

Manufacturer:

Model Number:

S760.4

Weight:

13.00lbs

Internal SKU:

s7604

Internal Product ID:

24209

Item Added to Cart

760W Sedona Series 4-Channel Amplifier

$119.99

Keep Shopping

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$13.99
Add Warranty
3 years of protection

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$39.99

Add
FREE NVX XMountPro Cell Phone Mount with Select Orders

Spend $200 and use code XMOUNTPRO to get this free!.

$14.99

Add
NVX Universal Remote Level Bass Control

Controls bass level and frequency via RCA/Interconnect connectors on any amp.

$9.99

Add

Don't see the accessory you're looking for?
View all available accessories for the Precision Power PPI S760.4.