700W RMS 2-Channel Stereo CTX Series Class A/B Car Amplifier (CTX-1600.2)
• 200W x 2 Chan. @ 4 ohms
• 400W x 2 Chan. @ 2 ohms
• Bridged 800W x 1 Chan. @ 4 ohms
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Turn On Delay for Quiet Start-Up
• 200W x 2 Chan. @ 4 ohms
• 400W x 2 Chan. @ 2 ohms
• Bridged 800W x 1 Chan. @ 4 ohms
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• Turn On Delay for Quiet Start-Up
Blend of Output and Quality at a Great Price
The CTX Series from RE Audio is a series of amplifiers that has exceptional sound quality, along with big power output. They feature a clean, stylish chassis with LED illumination. The CTX Series features Premap outputs for daisy chaining amplifiers, and an efficient heatsink for more power output without potential for overheating.
The monoblock amplifiers in the series are great for powering one or more subwoofers. They feature full digital class D circuitry which allows for extremely high output while preventing overheating or other issues.
| Model | CTX-1000.4 | CTX-1600.2* | CTX-3200.1 | CTX-4200.1 |
| Class | AB | AB | D | D |
| # of Channels | 4 | 2 | 1 | 1 |
| Dynamic Power | 1000W | 1600W | 3200W | 4200W |
| RMS Power[4O] | 100W x 4 | 200W x 2 | 400W x 1 | 550W x 1 |
| RMS Power[2O] | 150W x 4 | 350W x 2 | 750W x 1 | 1000W x 1 |
| RMS Power[1O] | - | - | 1200W x 1 | 1500W x 1 |
| Bridged Power[4O, RMS] | 300W x 2 | 700W x1 | - | - |
Internal Product ID:
68068
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
AWSOME PRICE
Never owned, used or heard RE Audio being played before. So i wasnt sure about their products. I am VERY, VERY satisfied with the quality so far. I have 4-12's hooked up to it. 2-4ohm subs (2ohm load in parallel) on each channel. Hits hard as heck in my 07 4door Focus. Will be ordering a second one with the amp kit just after i buy a RE Audio ZTX 5000.1. The AMP KIT: Its not 0awg wire. Its 1awg. Very flexiable wire. Very nice kit. Ive already recommended this amp and kit to a few folks. If youre looking for a good amp with enough power to be heard on the other side of Walmarts parking lot......you wont be disappointed.
37
found this helpful.Great Value
This amp is very powerful. All of the R.E's amps are very powerful love the look and durability of these little amps. All I'm running is R.E. subs, amps and component speakers. You won't be sorry if you purchase this little amp!!!
36
found this helpful.Sorry everyone I just ordered the last one
I'm so excited for it to be here! hopefully its as good as everyone says it is. I trust RE audio they sold me kick ass subs that out lasted my DB audio 2,300 watt amp.
27
found this helpful.Bad@$$ Amp
I purchased this for the price and quality of Re's equipment. I installed it on my mids and highs and I couldn't ask for anything better. This amp is well built, impressive and sleek.
28
found this helpful.Great buy
I love this amp ! Have two tens hooked up to it. Great bass pure power...
28
found this helpful.Great Amp!
I originally bought this to push 2 Kicker 15s, but instead turned it into my componet speaker amp, and WOW what a diffrence it makes! I have it running 2 kicker 6x9s, 4 kicker 6.5s, and 2 kicker 3.5s. The gain is only a 1/4 of the way turned up and it is EXTREAMLY loud! The only complaint i have is it doesnt come with a bass know, but other that great product and really fast shipping from sonic, and another great RE audio product
26
found this helpful.solid amplifier
Purchased this amp to match the re audio rt pro subs I have. No over heating or clipping. Rivals the fosgate amps that I used to buy. Though wish wire hookups were reversed.
22
found this helpful.RE amp
Works great sounds great would definitely buy again for sure
26
found this helpful.Great and Powerful
I purchased this amp to push 2 JL W3 12 inch subs. This amp has surpass all of my expectations and more. I am only using 2 of the 4 channels and i am using about 25% of the power that it has for the two channels. Very proud of this purchase and i am a fan of RE Audio now!!!
19
found this helpful.
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Controls bass level and frequency and monitor voltage
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
The XLOC22X helps you easily integrate with your factory or aftermarket stereo system
16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
Best selling similar products
Rockford Fosgate Punch PBR300X2
• 100 watts x 2 channel @ 4 ohms
• 150 watts x 2 channel @ 2 ohms
• Bridged: 300 watts x 1 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class BR 2 ohms Stable 2-Channel Amplifier
$249.99
• 55 watts x 2 channel @ 4 ohms
• 85 watts x 2 channel @ 2 ohms
• Bridged: 170 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class A/B 2 ohms Stable 2-Channel-Channel Amplifier
$199.99
• 250 watts x 2 channel @ 4 ohms
• 500 watts x 2 channel @ 2 ohms
• Bridged: 1000 watts x 1 channel @ 4 ohms
• Total RMS Power: 1000 watts
• Class A/B 2 ohms Stable 2-Channel Amplifier
$55.99
