See all parts that fit your 1982 Cavalier
1000W 5-Channel Class D Marine Full-Range Amplifier
• RMS: 75W x 4 + 400W x 1 @ 4 ohm, 100W x 4 + 600W x 1 @ 2 ohm
• Total RMS Power: 1000W
• Unregulated MOSFET switching type
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• NexD Switching Technology
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
900W Peak (300W RMS) 6x9” CS Series 3 Way Coaxial 4-ohm Speakers with Integrated Midrange Speakers
$111.96
List price $159.99
150W Peak (50W RMS) 3.5" Club Series 2 Way Coaxial 3-ohm Speakers
$79.95
List price $109.95
360W Peak (120W RMS) 6.5" Club Series 2-way Coaxial 3-ohm Speakers
$99.95
List price $139.95
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
280W Peak (90W RMS) 6x9” SXE Series 2-way 4-ohm Coaxial Speakers
$56.99
List price $71.99
• RMS: 75W x 4 + 400W x 1 @ 4 ohm, 100W x 4 + 600W x 1 @ 2 ohm
• Total RMS Power: 1000W
• Unregulated MOSFET switching type
• Dual-Range Differential Balanced Input Section
• Advanced Rollback Protection
• NexD Switching Technology
Here is the perfect, all-in-one solution to drive a potent 4-speaker + dual subwoofer marine audio system. The M1000/5v2 delivers up to 1000 W of clean power and can comfortably drive two pairs of quality component speaker systems with 75 W x 4 @ 4 ohms, while also delivering a stout 600 W of power to a dual subwoofer system. The breakthrough that makes this much power possible in such a small chassis is the NexD switching amplifier design
The M1000/5v2 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.
The obvious feature that sets the M1000/5v2 apart is its 5 Channels. However, not all setups have the luxury of 5 Channels to get a signal from. JL Audio engineers have you covered; the M1000/5v2 is equipped with the ability to apply only two channels of input to deliver signal to all five amplifier channels. Simply slide the "Input Mode" switch to "2 Ch", use only the inputs to channels 1 & 2, and the amplifier will do the rest of the hard work. With just one pair of RCAs, the M1000/5v2 sends signal to Ch 3 & 4 and will derive its subwoofer channel signal from a sum of all four input signals.
Should your JL Audio amplifier reach an unsafe operating temperature, a special circuit rolls back peak power output, without changing gain, until the amplifier cools down to a safe operating temperature. The red "Thermal" LED will light to indicate this condition has been reached. Once the amplifier cools down, the circuit restores full peak power output and the red "Thermal" indicator reverts to its normal state. The operation of Advanced Rollback Protection is inaudible in most cases, but it ensures that your music keeps on playing, even under the most demanding conditions.
JL Audio have taken the simple fixed PWM approach - found in almost all common amplifiers - and enhanced it with a very high switching frequency: 400 kHz, which is exponentially higher than most Class D Full-range amplifiers. This pushes the amplifier's bandwidth to a much higher frequency than seen before, and still provide minimal distortion and improved efficiency, while keeping typically bulky circuity more compact. Your speakers will reward you with crisp, clear performance. The bottom line is simply great audio: clean, powerful and reliable.
 |
 |
 |
JL Audio M1000/5v2 owner’s manual
Best selling similar products
• 80 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(111)
$209.99
List price $239.99
• 150 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(117)
$279.99
List price $335.99
• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier
(137)
$349.99
List price $419.99
• 800 watts x 1 channel @ 4 ohm
• 1350 watts x 1 channel @ 2 ohm
• 1700 watts x 1 channel @ 1 ohm
• Total RMS Power: 1700 watts
• Class D 1 ohm Stable Monoblock Amplifier
(144)
$259.99
List price $335.99
• 420 watts x 1 channel @ 4 ohm
• 760 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier
(38)
$209.99
List price $227.99
• 150 watts x 6 channel + 250 watts x 2 channels @ 4 ohm
• 225 watts x 6 channel + 400 watts x 2 channels @ 2 ohm
• Bridged: 450 watts x 3 channel + 850 watts x 1 channel @ 4 ohm
• Total RMS Power: 2200 watts
• Class D 2 ohm Stable 8-Channel Amplifier
(2)
$399.99
List price $539.99
• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier
(70)
$279.99
List price $383.99
• 240 watts x 1 channel @ 4 ohm
• 400 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier
(54)
$189.99
List price $239.99
• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$549.99
List price $659.99
Manufacturer:
Model Number:
M1000/5v2
Weight:
8.62lbs
Internal SKU:
m10005v2
Internal Product ID:
74129
| 5 star |
|
0% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
6-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(45)
$129.99
List price $179.99
NVX Remote Level Bass Control with Digital Voltmeter
Controls bass level and frequency and monitor voltage
(10)
$32.99
List price $99.99
Universal Remote Bass Level Control Knob
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
(8)
$7.99
List price $14.99
The XLOC66X helps you easily integrate with your factory or aftermarket system
(1)
$89.99
List price $101.99
NVX XIV65 V-Series Interconnect Cable
5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable
(25)
$29.99
List price $49.99
Belva BBIC65 Interconnect Cable
5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)
(10)
$9.99
List price $29.99
75 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
(22)
$34.99
List price $44.99
80 Amp Smart Relay Isolator (XSBI80)
Smart isolator - Monitors and auto-charging feature!
(2)
$24.99
List price $49.99
Great for isolating a second batter making it dedicated to the stereo system
(10)
$15.99
List price $19.99
200 Amp Smart Relay Isolator (XSBI200)
Smart isolator - Monitors and auto-charging feature!
(6)
$49.99
List price $79.99
200 Amp Relay Isolator (BIR200)
Great for isolating a second batter making it dedicated to the stereo system
(17)
$49.99
List price $59.99
500 Amp Relay Isolator (BIR500)
Does not create a voltage drop to the second battery like conventional isolators
(36)
$79.99
List price $95.99
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
(66)
$109.99
List price $131.99
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
(80)
$38.99
List price $79.99
Belva Nine Function Digital Multimeter
Perfect for any installation and troubleshooting
(7)
$9.99
List price $29.99
This is a must have! Set your crossover frequency like a Pro
(21)
$187.98
List price $197.98
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal
Make installation a breeze with the XBTU
(19)
$14.99
List price $24.99
World's Smallest AFS / Mini ANL Fuse Holder
Accepts 4 gauge or 8-gauge wire
(16)
$9.99
List price $19.99
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
(11)
$4.99
List price $9.99
High Quality Element Resistant AGU Fuse Holder
Belva BAGUH2 AGU Fuse Holder
(2)
$4.99
List price $9.99
Modular Linkable ANL Fuse Block
Modular Linkable ANL Fuse Block
(4)
$14.99
List price $59.99
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output
No-fail termination and current flow, it helps keep your system protected and running smoothly
(51)
$12.99
List price $24.99
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
(6)
$7.99
List price $9.99
4 Pack of 80 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
(20)
$3.99
List price $8.99
4 Pack of 100 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
(18)
$3.99
List price $8.99
4 Pack of 150 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses
(11)
$3.99
List price $8.99
2 Pack of 100 Amp Nickel-Plated ANL Fuse
ANL 100A Nickel plated for better power transfer
(8)
$3.99
List price $7.99
2 Pack of 200 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 200 Amp ANL Fuses
(23)
$3.99
List price $7.99
2 Pack of 300 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 300 Amp ANL Fuses
(19)
$3.99
List price $7.99
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin
Great for amplifiers that do not accept a large gauge power wire
(24)
$9.99
List price $19.00
Pair of 4 Gauge Spade Terminals, #8 Opening
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
(7)
$1.99
List price $3.99
4 Gauge Ring Terminals, 5/16" Opening
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
(3)
$4.99
List price $6.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(8)
$2.99
List price $9.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(25)
$7.99
List price $9.99
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
(21)
$14.99
List price $19.99
Marine Grade Bluetooth Audio Controller/Receiver
Marine Grade Bluetooth Audio Controller/Receiver
(10)
$49.99
List price $62.49
JL Audio M1000/1v2 (Open Box Complete)
1000W Monoblock Class D Marine Subwoofer Amplifier
$507.63
List price $729.99
600W, Single-Channel Class D XD Series Subwoofer Monoblock Car Amplifier
(13)
$399.95
List price $449.95
5000W RMS Class D Bass Series Monoblock Car Amplifier
(3)
$415.99
List price $599.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
