1400 Watt Peak (700W RMS) Rubicon Nano Series 4-Channel Full-Range Amplifier
• 125 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 1400 Watts
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty hybrid aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 6.5"W x 9"L x 1.5"H
• 125 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 1400 Watts
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty hybrid aluminum alloy heat-sink for extreme heat dissipation
• Dimensions: 6.5"W x 9"L x 1.5"H
Soundstream RN4.1400D owner’s manual
Best selling similar products
• 45 watts x 4 channel @ 4 ohm
• 65 watts x 4 channel @ 2 ohm
• Bridged: 125 watts x 2 channel @ 4 ohm
• Total RMS Power: 260 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier
$99.99
• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Bridged: @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$219.95
• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier
$279.99
Internal Product ID:
94438
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great little amp
I bought this to run my Hertz HSK 165 components and my rear doors as well. Currently I have it connected via the High Level Inputs as opposed to RCAS and haven't had any complaints. The sound is clean, there is plenty of power available. Not much more I could ask for. I don't hear any strange sounds when it's running. It just runs and runs and runs. I don't know what else I could have expected in an amp. I will definitely use more of these.
34
found this helpful.Decent performance and sound quality for the money
I know it's not the same thing as an old school Soundstream but it has good sound quality and powers my 3 chanel setup(2x 6.5 Polk Coaxials, 1x 10" Polk Sub) in an extended cab pickup very well.
It's not the cheapest for the wattage but it has a few extra features for adjusting and has a clean look that reminds me of my old Rubicon 502 and SA80 setup from the 90's
I have had it for 6 months with no issues. And thinking about buying the 5 channel for my car.
Verified purchase
33
found this helpful.Seems fine
My Phoenix Gold went out in the NSX and I was limited for space, needed a 4 channel for the JL Audio set up. This amp seems to be crisp and clear, plenty of control and cuts for the freq I need in the tweets and mids.
Loads of power for the JLs so I would recommend it, slim, powerful and small for what you get,
29
found this helpful.Chevy Avalanche up grade
I just had this install a couple of weeks back
It has plenty of power.
I'm glad I decided to buy this amp.
Verified purchase
28
found this helpful.Wow!
We put this amp on a pair of Morel 6.5s and it absolutely zings. Very clean, runs cool and easily mounts under a seat. Buy it today!
Verified purchase
24
found this helpful.Happy skeptic
Being an old school car audio person(bigger better) it is hard to accept the amount of wattage and clarity coming from such a small amplifier.This amp is half the size of my 2 channel.The controls are mounted where they are easily adjusted instead of on the ends.The last thing is to see what the durability of the unit is.Great sound quality,small size,high wattage,well designed.
Verified purchase
23
found this helpful.
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
The XLOC44X helps you easily integrate with your factory or aftermarket system
16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology
5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology
Great for isolating a second batter making it dedicated to the stereo system
Great for isolating a second batter making it dedicated to the stereo system
Does not create a voltage drop to the second battery like conventional isolators
Make installation a breeze with the XBTU
No-fail termination and current flow, it helps keep your system protected and running smoothly
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
