Access exclusive offers, news and more.
Thanks for signing up.You'll be the first to receive updates about new collections, top brands, and exclusive products.
JVC 2-Channel Class A/B Car Amplifier • 600 Watts Max • 200 Watts x 1 Chan. Bridged @ 4 Ohms • 100 Watts x 2 Chan. @ 4 Ohms • Anti Pop Circuitry • Angle Mount Block Terminals • 4-Way System Protection Circuitry
Learn more about the LS-ksax4302-RBJVC 2-Channel Class A/B Car Amplifier • 600 Watts Max • 200 Watts x 1 Chan. Bridged @ 4 Ohms • 100 Watts x 2 Chan. @ 4 Ohms • Anti Pop Circuitry • Angle Mount Block Terminals • 4-Way System Protection Circuitry
Internal Product ID:
24722
5 star |
|
50% |
4 star |
|
50% |
3 star |
|
0% |
2 star |
|
0% |
1 star |
|
0% |
Durability |
|
4.8 |
Value |
|
4.8 |
Features |
|
4.3 |
Design |
|
4.3 |
Usability |
|
4.8 |
Great amp
I would recommend the amp to anyone who doesn't need a lot of RMS power for a sub or 2. I have powered 2 Rockford R1 subs on it. I have also ran 2 Alpine 10 inch Type-R subs on it(2ohm each). Let me tell you that this amp has never disappointed me.
It runs cool and never has gone into protect once.
Clean sounding bass and highs
it has your basic features (Bass boost,crossover,gain,lp,hp,full)
The preamp out is also a nice touch. Makes it easy to run multiple amps.
15
found this helpful.One for the moeny.
I bought this amp on ebay, then purchased a sony system used so I gave it to my Brother-in-law. He has had it for over six months and no problems. He has it hooked up to two kickers I thinks it is a little under powered, but sounds good.
14
found this helpful.Great Amp for the Money
This amp provides clean, powerful sound. I use it to power a 10" 175W rms sub, and it does it very well.
6
found this helpful.JVC, you made a good amp.
I actually got this amp for free. I've had it about 3 months and I am really surprised. The amp has not kicked off, into protection mode or anything. Now when I found this amp it had been outside for quite awhile. On a covered porch, but exposed to rain and all. I took it apart and cleaned it and changed the fuse and it now powers my 1400 watt Powerbass sub. JVC, fantastic job. would recommend that if anyone has a chance to
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
$32.99
Controls bass level and frequency and monitor voltage
$29.99
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
$7.99
16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction
$12.99
Great for isolating a second batter making it dedicated to the stereo system
$14.99
Does not create a voltage drop to the second battery like conventional isolators
$65.99
Make installation a breeze with the XBTU
$16.99
No-fail termination and current flow, it helps keep your system protected and running smoothly
$13.99
Great for amplifiers that do not accept a large gauge power wire
$9.99
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
$1.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
$2.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
$9.99
Best selling similar products
• 75 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier
(6)
$199.99
• 65 Watts RMS x 2 @ 4 ohms
• 100 Watts RMS x 2 @ 2 ohms
• CEA-2006 Compliant
• Refined Heatsink with High Convection Capability
• Automatic Remote Turn-On/Off function
• Dimensions: 8.46" x 7.48" x 1.97"
$199.99
• 250 watts x 2 channel @ 4 ohms
• 400 watts x 2 channel @ 2 ohms
• Bridged: 800 watts x 1 channel @ 4 ohms
• Total RMS Power: 800 watts
• Class D 2 ohms Stable 2-Channel-Channel Amplifier
$224.00
• 50 watts x 4 channel @ 4 ohms
• 65 watts x 4 channel @ 2 ohms
• Bridged: 130 watts x 2 channel @ 4 ohms
• Total RMS Power: 300 watts
• Class D 2 ohms Stable 4-Channel Amplifier
$279.99
• 50 watts x 2 channel @ 4 ohms
• 100 watts x 2 channel @ 2 ohms
• Bridged: 200 watts x 1 channel @ 4 ohms
• Total RMS Power: 200 watts
• Class D 2 ohms Stable 2-Channel Amplifier
$219.99
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and ANL Fuse Holder
Complete 4 Gauge Amplifier Wiring Kit with 2 Channel RCA Interconnects & ANL Fuse Holder
Complete 2-Channel 4 Gauge Amp Kit with RCA Cables and Speaker Wire
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
4 Gauge Power Amplifier Installation Kit
4 Gauge Power Amplifier Installation Kit
Controls bass level and frequency and monitor voltage
Universal Remote Level Bass Control
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On
Add a 2-Channel amp without replacing your factory radio
80W 2-Channel Line Output Converter with Digital Noise Filter + Line Driver
Looking to fine tune the bass in your vehicle? Look no further
16.4 ft 2-Channel RCA Audio Interconnect Cable with Twisted Pair Construction
25 ft. of True 16 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
16 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)
Smart isolator - Monitors and auto-charging feature!
Great for isolating a second batter making it dedicated to the stereo system
Smart isolator - Monitors and auto-charging feature!
Smart isolator - Monitors and auto-charging feature!
Does not create a voltage drop to the second battery like conventional isolators
Perfect for any installation and troubleshooting
Perfect for every toolbox
Impedance Meter / Signal Generator
Set your gains like a Pro, accurately and quickly
This is a must have! Set your crossover frequency like a Pro
Make installation a breeze with the XBTU
Accepts 4 gauge or 8-gauge wire
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
Belva BAGUH2 AGU Fuse Holder
4/8 Gauge AGU Fuse Holder
Modular Linkable ANL Fuse Block
No-fail termination and current flow, it helps keep your system protected and running smoothly
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
ANL 100A Nickel plated for better power transfer
Two fuses per order. High quality 200 Amp ANL Fuses
Two fuses per order. High quality 300 Amp ANL Fuses
Great for amplifiers that do not accept a large gauge power wire
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
5 Pack of Black 4 Gauge Ring Terminals
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing