See all parts that fit your 2019 Flex
1000W RMS 5-Channel Class D Punch Series High Efficiency Amplifier
Punch Series Class D Full Range 5-Channel Car Amplifier • Punch EQ 2 Variable Bass Boost • MOSFET Power Supply • Variable High/Low Pass Crossovers • Infrasonic Filter • CEA-2006 Compliant
Learn more about the p1000x5d
Install New Speakers in select 1998-2024 vehicles from Ford, Lincoln, Mercury
$8.99
List price $9.99
Add 5-1/4" or 6-1/2" Speakers to Factory 6" x 8" Mounting Locations for select 1950-2025 vehicles from Ford, Mercury, Mazda
$7.99
List price $14.99
Rockford Fosgate Punch P1 P1683
260W Peak (130W RMS) 6x8" Punch Series 3 Way Coaxial 4-ohm Speakers
$109.99
Universal 6x8" or 5x7" Self-Adhesive Foam Speaker Baffle Ring Kit (Pack of 2)
$15.99
List price $29.99
500W Peak (250 RMS) 6x8" KS-Series 2-way 4-ohm Component Speaker System (KSS6804)
$249.99
List price $279.99
JBL SHOCK WAVE 150W65 (JBLSPKSW150W65)
600W Peak (300W RMS) 6.5" Shock Wave Series 4-ohm Midrange Speakers
$119.95
List price $129.95
500W Peak (60W RMS) 6x8” J-Series 2-way 3-ohm Coaxial Car Speakers
$49.99
List price $79.00
160W Peak (80W RMS) 1" PRIME Series Mylar Balanced Dome Car Tweeters
$39.99
List price $44.99
Punch Series Class D Full Range 5-Channel Car Amplifier • Punch EQ 2 Variable Bass Boost • MOSFET Power Supply • Variable High/Low Pass Crossovers • Infrasonic Filter • CEA-2006 Compliant
Looking for an amplifier than can power up your speakers and subs? Then look no further than Rockford Fosgate's 2011 P1000X5D 5-channel amplifier. With 5,4,3,and 2 channel operations this amplifier will pretty much work for any application and in different configurations. The high and low-level inputs will allow the installation of the amplifier into any factory or aftermaket car audio system with quickness and ease. High and low crossovers, along with an infrasonic crossover and bass boost, will allow for complete control and fine tuning of your system to better suit your personal preferences and needs. Its CEA-2006 compliance assures that the power rating will be accurate each and every single time. So if you are looking for an amplifier than can amplify a complete car audio system, then the P1000X5D is the solution to your quest.
|
(newest, current model)
|
|
(previous model, replaced by Rockford Fosgate Punch P1 P1000X5)
|
2 Infinity REF507CF (INFSPKRF507CFUS) w/ Adapter Plates
390W Peak (130W RMS) 5.25" Reference Series 2-way 3-ohm Component Speaker System with Speaker Adapter Plates
$477.88
List price $543.88
6.75" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay, Android Auto with Backup Camera
$329.99
600W Peak (200W RMS) 6.5” CS Series 2 Way Coaxial 4-ohm Speakers
$79.96
List price $119.99
6.8" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay, Android Auto, and SiriusXM Ready
$349.99
List price $420.00
7" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay and Android Auto (SiriusXM Ready)
$329.95
List price $349.95
150W Peak (50W RMS) 3.5" Club Series 2 Way Coaxial 3-ohm Speakers
$79.95
List price $109.95
6.8" Double DIN Digital Multimedia Receiver with Bluetooth, Wireless Apple CarPlay, and Android Auto (SiriusXM Ready)
$599.99
List price $750.00
480W Peak (120W RMS) 6.5” DS Series 2-way 4-ohm Coaxial Car Speakers (DSC6504)
$84.99
List price $94.99
600W Peak (200W RMS) 6.5" DB+ Series 2 Way Coaxial 4-ohm Car, Marine and Powersports Speakers
$109.00
List price $119.99
6.2" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay, Android Auto and Phone Mirroring
$89.99
List price $269.99
Best selling similar products
• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier
(46)
$349.99
List price $419.99
• 150 watts x 6 channel + 250 watts x 2 channels @ 4 ohm
• 225 watts x 6 channel + 400 watts x 2 channels @ 2 ohm
• Bridged: 450 watts x 3 channel + 850 watts x 1 channel @ 4 ohm
• Total RMS Power: 2200 watts
• Class D 2 ohm Stable 8-Channel Amplifier
(2)
$399.99
List price $539.99
• 100 watts x 4 channel + 315 watts x 1 channel @ 4 ohm
• 150 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier
(9)
$259.99
List price $323.99
• 100 watts x 6 channel @ 4 ohm
• 150 watts x 6 channel @ 2 ohm
• Bridged: 300 watts x 3 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 6-Channel Amplifier
(7)
$319.99
List price $383.99
• 50 watts x 8 channel + 80 watts x 4 channel @ 4 ohm
• Total RMS Power: 720 watts
• Class D 4 ohm Stable 12-Channel Digital Sound Processor Amplifier
• High-resolution (Hi-Res) audio playback
• Selectable pre-configured sound system configurations
• Embedded RTA signals for customized sound tuning
• Bluetooth audio streaming with included external module
(1)
$1999.95
List price $3480.00
• 100 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 200 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1300 watts
• Class D 2 ohm Stable 5-Channel Amplifier
(2)
$660.00
List price $1369.00
• 75 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 150 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• 700 watts x 1 channel @ 1 ohm (subwoofer output)
• Bridged: 400 watts x 2 channel @ 4 ohm
• Total RMS Power: 1100 watts
• Class D 1 ohm Stable 5-Channel Amplifier
(2)
$259.00
List price $259.00
• + @ 4 ohm
• 85 watts x 1 channel + 375 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm + 375 watts x 1 channel @ 2 ohm
• Total RMS Power: 1035 watts
• Class D 2 ohm Stable 5-Channel-Channel Amplifier
$659.99
List price $719.99
• 65 watts x 4 channel + 150 watts x 1 channel @ 4 ohm
• 90 watts x 4 channel + 300 watts x 1 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm + 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 660 watts
• Class A/B 2 ohm Stable 5-Channel Amplifier
$449.99
List price $479.99
• 125 watts x 4 channel + 300W x1 @ 4 ohm
• 200 watts x 4 channel + 500W x 1 @ 2 ohm
• Bridged: 400 watts x 2 channel @ 4 ohm + 800W @ 1 ohm
• Total RMS Power: 1600 watts
• Class D 1 ohm Stable 5-Channel Amplifier
(2)
$449.99
List price $719.99
Manufacturer:
Model Number:
P1000X5D
Weight:
10.00lbs
Internal SKU:
p1000x5d
Internal Product ID:
34756
| 5 star |
|
67% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
33% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
AMAZING!!! Buy without hesitation!
I have this unit installed in my boat fed by a Kenwood KDC-BT952HD. It is driving 8 (yes 8, 4 pairs) MTX 8" two way marine speakers AND 2 Image Dynamics ID10 D2 subs. MTX Coaxials are wired in parallel to achieve 2ohm per channel. Image Dynamic subs are wired in series/parallel again to achieve 2 ohms.
I've always assumed class D amps would only be for sub woofers but with the current wave of manufacturers releasing class D full range amps I was intrigued. I found a white paper online detailing the latest class D chips and how they have been improved (heavy read but worth it if you can grasp even half of it) to increase accuracy and efficiency. That paper combined with the ease of installation (1 amp for 10 speakers vs a typical 3 amp setup) and the potential weight savings (again, 3 amps vs 1) and I figured why not try it.
In my application, the sound quality is simply amazing. Someone running more accurate silk dome tweeters may disagree but EVERYONE that has heard my boat has said exactly the same thing: Painfully loud, crystal clear, full and rich sounding (compared to typical tower/can "systems").
The real magic is in the unit itself. On top of being fairly light weight and small considering the power output / number of channels this thing runs COLD. With 4 ohm loads the amp barely gets above ambient. Even with max load (aka minimum ohms) on all channels, moderate listening levels barely get the unit warm to the touch. That is not to say you can bury it under carpet however... After 4 hours of max effort blasting, it will get HOT. However I have never bumped into thermal protection. This thing is a TANK. With quality 4v discrete inputs I found the limits of my drivers LONG before I any perceivable amp clipping or distortion.
I power my system with one standard size Optima blue top deep cycle... Even driving the amp as hard as I do, 4hrs of run time is no problem for this combo. Proof positive class D is efficient.
The ONLY gripes I have are with the speaker terminals.
I assume the screws are knurled to give them 'bite' on the wire but that 'bite' tends to break the wire. The only way to combat this is to solder the tips (which is a good practice anyway).
The terminals themselves do not accept as large of a gauge wire as I would have expected with level of power output. Not a huge deal but if you are trying to run fat wire, it doesn't leave you much clearance for solder tipping the ends.
I recommend this series of amp to ANYONE who owns a boat or wants big power in a small package. Simply amazing.
28 found this helpful
Tank Tough
I thought this was a great amp to use to run your whole system with only one amp. Build solid and tough! Rockford still has great products. I installed one in both my sons cars and wow they rock. We are using Kicker subs. One son is using Alpine speakers and my other son went with the Rockford pro series speaker.
25 found this helpful
Wouldn't buy again
Being a little older (40) i remember when Rockford was one of the best u could get, I still have Punch 150s I bought new, what a great product. That was not the case here. The item arrived well packed. After that it was all bad. I opened the box to find made in china all over the amp. I spent the day installing the amp. It worked great for the first 5 minutes. The protect light came on and it never worked again. I wouldn't recommend buying something like this online if it can be avoided. I know I won't. There are plenty of company's out there that still make amps right here in the USA. That's what I'll buy from now on.
25 found this helpful
Complete 6-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire
(25)
$59.99
List price $89.99
4 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire
(20)
$24.99
List price $49.99
4 Gauge 100% (OFC) Oxygen Free Copper Amplifier Power Wiring Kit with Speaker Wire
(78)
$99.99
List price $131.99
NVX Remote Level Bass Control with Digital Voltmeter
Controls bass level and frequency and monitor voltage
(10)
$32.99
List price $99.99
Universal Remote Bass Level Control Knob
Flush Mount & Universal via RCA. Works with any amp, controls your bass output
(8)
$7.99
List price $14.99
The XLOC66X helps you easily integrate with your factory or aftermarket system
(1)
$89.99
List price $101.99
The XLOC88X helps you easily integrate with your factory or aftermarket system
(1)
$64.99
List price $119.99
NVX XIV65 V-Series Interconnect Cable
5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable
(25)
$29.99
List price $49.99
Belva BBIC65 Interconnect Cable
5m (16.40 ft) 6-Channel RCA Audio Interconnect Cable (CCA)
(10)
$9.99
List price $29.99
75 ft. of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire
(13)
$59.99
List price $124.99
Belva BBG3KT CCA 1/0 Gauge Big Three Kit
Features everything needed to upgrade factory power and ground wire.
(48)
$49.99
List price $79.99
12-Volt Deep Cycle Sealed Non-Spillable Lead Acid AGM Battery Power Cell with 3300 Max Amps (BCI Group 34)
(87)
$419.99
List price $429.99
12-Volt Deep Cycle AGM Battery Power Cell with 750-Max Amps
(8)
$119.99
List price $199.99
80 Amp Smart Relay Isolator (XSBI80)
Smart isolator - Monitors and auto-charging feature!
(2)
$24.99
List price $49.99
Great for isolating a second batter making it dedicated to the stereo system
(10)
$15.99
List price $19.99
200 Amp Smart Relay Isolator (XSBI200)
Smart isolator - Monitors and auto-charging feature!
(6)
$49.99
List price $79.99
200 Amp Relay Isolator (BIR200)
Great for isolating a second batter making it dedicated to the stereo system
(17)
$49.99
List price $59.99
500 Amp Smart Relay Isolator (XSBI500)
Smart isolator - Monitors and auto-charging feature!
(8)
$89.99
List price $109.99
500 Amp Relay Isolator (BIR500)
Does not create a voltage drop to the second battery like conventional isolators
(36)
$79.99
List price $95.99
True 1.0 Farad 20V Capacitor with Digital Read-out, Built-in Distribution Block
(33)
$109.99
List price $131.99
1.0 Farad Capacitor with Digital Red Display for up to 1000W Max
(80)
$38.99
List price $79.99
Belva Nine Function Digital Multimeter
Perfect for any installation and troubleshooting
(7)
$9.99
List price $29.99
Universal Positive/Negative 1/0 or 4 Gauge Battery Terminal
Make installation a breeze with the XBTU
(19)
$14.99
List price $24.99
World's Smallest AFS / Mini ANL Fuse Holder
Accepts 4 gauge or 8-gauge wire
(15)
$9.99
List price $19.99
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder
(11)
$4.99
List price $9.99
High Quality Element Resistant AGU Fuse Holder
Belva BAGUH2 AGU Fuse Holder
(2)
$4.99
List price $9.99
Modular Linkable ANL Fuse Block
Modular Linkable ANL Fuse Block
(4)
$14.99
List price $59.99
ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output
No-fail termination and current flow, it helps keep your system protected and running smoothly
(50)
$12.99
List price $24.99
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder
(6)
$7.99
List price $9.99
4 Pack of 80 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses
(19)
$3.99
List price $8.99
4 Pack of 100 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses
(17)
$3.99
List price $8.99
4 Pack of 150 Amp Nickel-Plated MANL Fuse
Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses
(11)
$3.99
List price $8.99
2 Pack of 100 Amp Nickel-Plated ANL Fuse
ANL 100A Nickel plated for better power transfer
(8)
$3.99
List price $7.99
2 Pack of 200 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 200 Amp ANL Fuses
(22)
$3.99
List price $7.99
2 Pack of 300 Amp Nickel-Plated ANL Fuse
Two fuses per order. High quality 300 Amp ANL Fuses
(19)
$3.99
List price $7.99
Gauge Reducer, 4 Gauge Input to 8 Gauge Pin
Great for amplifiers that do not accept a large gauge power wire
(23)
$9.99
List price $19.00
Pair of 4 Gauge Spade Terminals, #8 Opening
Spade Terminals • 4 Gauge • 1 Red & 1 Black • Nickel Plated
(7)
$1.99
List price $3.99
4 Gauge Ring Terminals, 5/16" Opening
Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)
(3)
$4.99
List price $6.99
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
4 Gauge Ring Terminals with 3/8" Opening (5 Pieces)
(8)
$2.99
List price $9.99
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(4-pack) 4 Gauge Solid Copper Ring Terminals with Shrink Tubing
(25)
$7.99
List price $9.99
0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors
(21)
$14.99
List price $19.99
• Wired Bass/Treble Remote for select 2007-2025 Punch and Power amplifiers
• Controls bass on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox
(62)
$49.99
List price $49.99
Diamond Audio D7401 ( D7 401 ) FACTORY R/B
D7 Series Monoblock Amplifier
$629.99
List price $1099.99
In-Dash 7" Touchscreen DVD Multimedia with iPod Video Support
(1)
$559.99
List price $1049.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
