Digital Sound Processors for 2013 Toyota 4Runner

---

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• Black Digital Bass Reconstruction Processor
• Patented Bass Maximizer
• 13.5v RMS Peak Output Level
• Perfect addition to all systems

• 2-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay

• Dual Auxiliary Inputs
• Master & Subwoofer Volume Control
• Gold-Plated Contacts
• Blue Illumination
• 7V Preamp Outputs

• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 6-output channels
• Access four user-adjustable 10-band graphic equalizers
• 30-second single button calibration

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 8-Channel digital signal processo
• 80 total bands of equalization
• TüN software offers quick input/output setup
• 8 RCA inputs or 1 optical input
• Includes DRC-200 digital remote control

• 15 Band Parametric EQ
• 8-Channel RCA Outputs
• Provides up to 2 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments

• 2-Channel Line Out Converter
• 2 inputs and 2 outputs
• Compact design

• 7 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 8 volts max preamp outputs
• Subwoofer frequency and level control

• 4 band-Band Parametric Marine Equalizer
• 3-zone controller with 2 separate equalizers for tower and cabin zones
• Main input, Auxiliary input, or Bluetooth input
• Master, in-boat and tower zones, and subwoofer volumes
• Includes a talkback microphone for PA communications

• 6-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• Digital Bass Reconstruction Processor
• Bass maximizer circuitry
• Dual knob dash mount control with optional remote feature
• Speaker level inputs

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• Digital Bass Restoration Processor
• AudioControl ACR-4 bass remote included
• Speaker and line-level (RCA) inputs
• ParaBass equalization circuitry for bass shaping

• 6-Channel Digital Signal Processor
• 15 band parametric equalizer
• Fully adjustable crossovers
• Speaker delay timing alignment
• Advanced CSR 5.0 Bluetooth module
• Conformal coated 4-layer circuit PC board
• Tuning Software: Windows

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• 7-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 7 volts max preamp outputs
• Subwoofer frequency and level control
• Nickel-plated RCA level inputs

• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP

• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 2-output channels
• User adjustable 10-band graphic equalizer
• 30-second single button calibration

• Digital Bass Reconstruction Processor
• Advanced line driver circuitry
• Dash-mount remote control
• Speaker level inputs

• 31-Band graphic EQ
• 6 Inputs, 10 individually assignable outputs
• Complete tuning control via Bluetooth
• Retains voice prompts, parking sensor chimes, and more
• Works with wide range of vehicle application systems

• Digital Bass Reconstruction Processor
• Dash-mount remote control
• Speaker level inputs

• Digital Bass Processor with 4-Channel Line Out Converter
• Restores and enhances low frequencies
• Speaker-level input for OEM and factory integration
• Dash mount remote control included

• 7 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 7 volts max preamp outputs
• Subwoofer frequency and level control

• 5-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 4 band-Band Graphic Equalizer
• 3 setsof preamp outputs (front, rear and subwoofer)
• 9.5 volts max preamp outputs
• Subwoofer frequency and level control

• 4 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 6-Channel Digital Signal Processor with LCD Display
• Includes six inputs and six outputs
• 15-band parametric equalizer
• External Bluetooth dongle included

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• 2-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• 5 band-Band Parametric Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 8.5 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)

• 2-Channel Speaker High->Low Level Converter
• Accepts head units with 80 watts per channel
• Transformer circuit for noise cancellation

• 5 band-Band Parametric Equalizer with Digital Bass Processor
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 12 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• Converts 10 to 30 watts per channel with a fixed 10:1 conversion
• Great for getting an additional set of pre-amps outputs from a head unit equipped with only one set

• 6-Channel digital sound processor with Automatic Sound Tuning
• 31-Band parametric and graphic equalizer
• Includes remote control and mounting hardware
• Sound tuning with AutoEQ 2.0 on Apple iOS or Android
• Instant precision with center image mode
• Features presets for every playlist

• 8-Channel Digital Signal Processor
• 31 band parametric equalizer
• Fully adjustable crossovers
• Speaker delay timing alignment
• Advanced CSR 5.0 Bluetooth module
• Conformal coated 4-layer circuit PC board
• Tuning Software: Windows / Android / iOS

• 2-Channel line output converter harness kit

• 8-Channel digital signal processor
• Provides 7 signal inputs and 8 analog outputs
• Features 31 band equalizer and 68 step electronic crossover
• Selectable optical digital input via DRC HE remote control

• 7 band-Band Parametric Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 9 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 5 band-Band Parametric Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8.5 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 1 Channel digital bass enhancer
• Bass enhancement and bass driver
• PFM subsonic filter switch
• Includes dash mount remote control

&bull 4-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 2-Channel Line Output Converter
• Designed for adding or retaining an amplified system
• Accepts both high-level and low-level inputs
• Remote level controller included

• 2-Channel input and 6-Channel out digital sound processor
• DSP with LCD Screen feature
• Bluetooth connectivity via DS18 DSP
• IOS and Android Compatible

• LPH speaker extension harness
• Compatible plugs and color-coded wires
• Length: 17 feet

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 15 Band graphic EQ
• 4 inputs and 6 individually assignable outputs
• Independent equalization for front, rear, and sub
• Independent crossover for front, rear, and sub
• Selectable slope (12, 24, 36, or 48db per octave)
• Front and rear channels can be delayed independently up to 10ms
• Easy behind the radio installation in most applications

• 4-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• Wet Sounds WS-420 BT 4-Band Parametric Marine Equalizer
• Built-In Bluetooth
• Microphone Turns Your System into a PA
• Compatible with Android and iPhone
• WS-EQ UDM - S Aluminum In Dash EQ Mounting Bracket

• Line out converter for adding amplifier to factory radio
• Auto remote turn on
• 6:1 step down with adjustable output
• 100 Watts Max
• 50 Watts max per channel

• 4-Channel input and 8-Channel out digital sound processor
• Bluetooth connectivity via DS18 DSP App
• IOS and Android Compatible
• Durable coated PCB

• Digital bass processor with 2-channel line output converter
• 2-channel RCA input for aftermarket sources
• Selectable signal sensing or direct turn on
• Includes dash mount remote

• 6-Channel Digital Signal Processor with LCD Display
• 15 band parametric equalizer
• Fully adjustable crossovers
• Speaker delay timing alignment
• Includes external Bluetooth dongle for music streaming

• Interface For Smart Radios
• 25-ohm Load
• 4-Ch 20V Inputs

• Two Channel Output Converter
• Gold Plated RCA Jacks
• Stinger Select Series

• 5 band-Band Parametric Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8.5 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs