Universal-Fit Audio for 2015 Ford Flex

---

• Universal Roll-Cage Soundbar Mounting Clamps
• Designed for use in SoundExtreme soundbars (Sold separately)
• Fits in 1.5" to 3" mounting tubes
• Sold in pairs

• Compact standalone sound pressure meter
• Measures SPL, current, maximum, and minimum voltage
• Measures speaker tunes and subwoofers
• Attachable to car windshield

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• Double-DIN Dash Kit
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• Universal Rear View Backup Camera
• Mounting Style: Full License Plate Frame
• Resolution: 720 x 480 
• Waterproof: Yes
• Nightvision: Infrared LED's

• Front Load Flush Mount Flange
• For use with Belva BAWLk, BA2USB or BAVTM
• Color: Black
• Material: Plastic

• Wired Bass/Treble Remote for select 2007-2025 Punch and Power amplifiers
• Controls bass on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 200 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Easy reset/disconnect
• Can act as a master disconnect for circuits

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• 3" Epic Pro Series 4-ohm Pro Audio Horn Tweeters
• 360 watts per pair / 180 watts Peak each
• 280 watts per pair / 140 watts RMS each
• 4 oz. Neodymium magnet motor structure
• 4-ohm impedance

• 10" Amplified Loaded Subwoofer System
• 180 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 80A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay

• Wired bass remote controller for Kicker CX series amplifiers
• Works with DX or PX series amplifiers with remote bass jack
• Includes 19.5 ft. cable and mounting accessories

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D amplifier
• Variable bass boost
• Speaker-level inputs

• Drive Smarter app compatible
• Preloaded database of red-light and radar cameras
• Built-in GPS
• Works Apple CarPlay and Android Auto
• Next Gen Antenna platform
• Dual Core Processor
• Escort Smart Cord USB Included

• Works with your JL Audio LED speakers
• Control lighting colors and the intensity of your lighting
• Compact system can be installed in almost any application
• Built-in over-current and short-circuit protection
• Built-in voltage and temperature monitoring

• Heavy duty terminals for serious applications
• Lightweight 3/4" PVC
• Won't break or leak under high pressure
• 5/16" Bolt Terminal
• All Grade 8 Hardware

&bull Pair of Bass Blockers For 4" Speakers
• Blocks 0-1200 Hz @ 4 Ohm
• Blocks 0-600 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 6" x 9" Universal Speaker Spacers / Depth Extenders
• Adds 1-1/2" depth to speakers
• Items that make the installer's Life easier
• Trimrings and Trimplates
• Speaker Grills
• Speaker Adapter plates

• Replacement Viper Remote / LCD Pager For Select Viper Alarms

• Makes noise even if thief disconnects main car battery
• Key on/off feature to allow manual override

• 7 Meters
• 12 Gauge Speaker Wire
• High Strand Count for Maximum Flexibility
• 23 Foot Length

• Wired Remote Control
• Designed for Marine Environments
• Compatible with Kenwood Marine & In-Dash Head Units
• Includes Mounting Hardware

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• Multi-Video Amplifier
• Includes one RCA input and four RCA outputs
• Video level control for each level

• Universal Antenna Extender • Extends Antenna 48" (4 ft.)

• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB

• 4 Gauge Firewall Grommet
• IP68 Waterproof Rating
• Protects Cables When Installing Through a FIrewall
• Sold Individually

• Prevents Primary Battery Discharge
• Maximum Current Transfer
• Ideal for 2nd Audio Battery Isolation from Vehicle Systems
• 500A Constant/ 900A Peak

• Heavy duty terminals for serious applications
• Lightweight 3/4" PVC
• Won't break or leak under high pressure
• 5/16" Bolt Terminal
• All Grade 8 Hardware
• Two Channel

• Universal Antenna Extender
• Extends Antenna 6" (.5 ft.)
• Right Angle Male Connector

• Wired Bass Remote Controller
• Compatible with select JL Audio HD, MHD and XDM amplifiers
• Flush-mountable installation
• Color: Black

• 150A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• USB/AUX input
• 6-foot cable
• front-mounted USB-A port and 3.5mm aux input
• 1" mounting hole required
•Easy screw in style installation

• Load Generating Device and Signal Stabilizers
• Designed for non-amplified Dodge, Chrysler, Jeep and Maserati sound systems
• Generates load and stabilize signal from a non-amplified factory system
• Operating Impedance: 20 ohms

HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish

• Single 12" Vented MDF Enclosure
• Holds one 12" subwoofer
• 3/4 MDF (Medium Density Fiberboard) Construction
• Durable black carpeting
• Gold Terminals
• Internal Box Volume: 1.8 cubic ft.

• Red LED Voltage Display
• Universal Mounting
• Monitor System Voltage
• Easy Installation

• Stinger Select Circuit Breaker
• Power Rating: 250 Amps
• Push Button Reset
• Water Resistant Housing
• Integrated Holes for Simple Mounting
• Compact and Lightweight Design

• Features easy-to-read 2-3/4" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 36 in. 18 gauge CCA test leads

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• NVX Remote Level Controller with Digital Voltmeter
• Can adjust the amplifier gain even while driving
• In-dash or Under-dash mountable
• Compatible with most head units/amplifiers combinations
• Blue LED display (high voltage / low voltage)

• Empty Single 6x9" Speaker Enclosures
• Medium Density Fiberboard (MDF) construction with charcoal carpet finish
• Hatchback enclosure design suitable for trucks
• Integrated terminals for easy installation and removal

• 2-Channel Ground Loop Isolator
• Eliminates Noise and Static

• Ported enclosure with 2 12" Solo-Baric L7R Series Subwoofer
• 1200 watts RMS (2400 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 15-7/8" H x 15-1/4" W x 20-3/8" W2

• Universal Round Chrome-plated Terminal Cup for Speaker & Subwoofer boxes
• Chrome-plated contacts for optimal signal transfer
• Screw binding posts for a tight secure connection
• Positive (Red) and negative (Black) indicators to ensure proper wiring
• Easy to install and use

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 1 ohm
• Mount depth: 7.85"
• Sensitivity: 88.30 dB

• Complete 0 Gauge Amplifier Installation Kit
• Designed for Systems up to 3600 Watts
• Includes Everything Needed for Installation
• Premium Power and Ground Cable

• 2-Way Paging Remote Car Starter
• 5-Button LCD Transmitter
• 3000 feet of range (0.56 miles)
• Full high speed 2-way data to data

• Remote Controller with Fast Charge USB for inverters
• Built-in bright blue backlit LCD text display
• Compatible with select Cobra inverters
• Features 4 mounting options
• Mounting hardware included

• 5 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• Designed to connect in-dash receiver wiring harness to vehicle wiring harness

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 7.4"
• Sensitivity: 87.50 dB

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• 2-Way Remote Start, Keyless Entry and Car Alarm System
• Includes (1) 2-way LCD transmitter and (1) 1-way sidekick remote control transmitter
• 1 mile range
• Antenna with integrated valet switch and LED

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals