Discontinued Monoblock Amplifiers

• DX Series Monoblock Class D Car Amplifier
• 275 Watts x 1-Channel @ 2 Ohm
• 140 Watts x 1-Channel @ 4 Ohm
• Muting Circuit
• 3 Automatic Turn-On Modes
• Balanced Differential Inputs

• RMS Power: 500W x 1 @ 4 ohm, 1000W x 1 @ 2 ohm, 1500W x 1 @ 1 ohm
• Total Peak Power: 1500W
• Variable Low-Pass Filter (40-180 Hz)
• Dimensions: 6"W x 13.5"L x 2"H

HFi Series Single Channel Monoblock Class D Car Amplifier • PWM MOSFET power supply • High Performance Battery from Shuriken • 80 Amp Hours • 1900 Crank Amps • 200 amp Battery Isolator and Relay • Extends battery life

1300 watts RMS x 1 at 2 ohm • Class-D • variable low-pass filter • Dynamic Bass Optimization circuit • preamp outputs

• 500 Watts RMS x 1
• Sensitivity: 87.15 dB
• Mounting depth: 6.65 "
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• Wired remote bass level control included
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Variable Bass Boost: 0 to +12 dB bass boost at 44 Hz
• Dimensions: 6-3/4" W x 12-15/16" L x 1-13/16" H

• R1200-1D 1200W RMS Prime Series Monoblock Class D Car Amplifier
• Two VSW124V2 600W RMS 12" VS-Series Dual 4-ohm Car Subwoofers

Factory Reconditioned with 90 Days Manufacturer's warranty, 750W RMS x 1 at 2 ohm • Class D design • wired remote bass level control • preamp outputs • CEA-2006 compliant • subsonic filter

• RMS: 200W x 1 @ 4 ohm, 400W x 1 @ 2 ohm, 800W x 1 @ 1 ohm
• Total Peak Power: 1600W
• CEA-2006 Compliant
• Selectable Bass Boost: 0, +6, +12 dB
• Class D Circuitry
• NVX XKIT42 100% Copper 4 Gauge Car Amp Install Kit w/ 2-Ch RCA

DX Series Monoblock Class D Car Amplifier • 1000 Watts x 1-Channel @ 1 Ohm • 550 Watts x 1-Channel @ 2 Ohm • 280 Watts x 1-Channel @ 4 Ohm • Muting Circuit • 3 Automatic Turn-On Modes • Balanced Differential Inputs

• 2 RE Audio Subs with a Matching Kicker Amp
• RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 15-1/2"L x 2-1/8"H

1600W Max, Intake Monoblock Amplifier • Optional bass remote and digital volt-meter display available and sold separately • Class A/B • 800W RMS @ 2 ohm • 400W RMS @ 4 ohm • Preamp outputs • Cobalt Blue Illumination • Intake cooling fan • 4-way protection circuitry

Picasso Series Monoblock Class D Car Amplifier • 800W x 1 chan. @ 4 ohm • 1500W RMS • Twin Stack Technology • Anodized heatsink • Variable low-pass filter • Subsonic filter

• RMS: 250W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• Total Peak Power: 700W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• Class D Circuitry
• Dimensions: 13-3/16"L x 7-1/2"W x 2"H

• RMS: 475W x 1 @ 4 ohm, 750W x 1 @ 2 ohm, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Fluid-Fets MOSFET Power Supply
• Q-Stasis Pre-Amplifier Stage
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 9.50"W x 14.41"L x 2.34"H

• Peak: 750W x 1 @ 4 ohm, 1500W x 1 @ 2 ohm
• Total Peak Power: 1500W
• 1 Pair of Preamp Outputs
• Bass Boost: 0-12 dB at 50 Hz
• Low Pass Filter: 40-150 Hz
• Dimensions: 9-1/16"W x 17-1/8"D x 2-5/16"H

• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Variable low-pass filter: 32 - 320 Hz, 24 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• 0 to 180 degree Phase Output
• Dimensions: 12.3" W x 7.4" L x 3.74" H

1800W Class-D Monoblock Amplifier • 500W RMS x 1 @ 4 ohm • 900W RMS x 1 @ 2 ohm • Variable Low-Pass and Subsonic Filter • High and Low Level Inputs • 1 Pair RCA Outputs • 0 - 18 dB Bass Boost

Item is used and has been installed
• Peak: 475W x 1 @ 4 ohm, 750W x 1 @ 2 ohm, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Built-In System Diagnostics
• Variable Bass EQ: 0 to +10 dB at 45 Hz
• Class D Circuitry
• Dimensions: 8-5/16"W x 15-1/2"D x 2-3/8"H

• 450 Watts RMS x 1 @ 4 ohm
• 700 Watts RMS x 1 @ 2 ohm
• 1400 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2800 Watts
• CEA-2006 Compliant
• Built for Powersports and Marine Applications
• HEATSINK
• Dimensions: 11.5" W x 4.25" L x 1.6" H

100W x 1 Chan. @ 2 Ohm RMS • Description Coming Soon!

• 400 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 225W per channel
• RMS Power: 85W per channel
• Soft rubber suspension
• Neodymium magnet
• Ferrofluid cooled and damped
•Includes a 12dB/Octave inline filter
• Variable mounting system
• 8 ohm

ZX Series Class D Monoblock Car Amplifier • 750W x 1 chan. @ 4 ohm • 1500W x 1 chan. @ 2 ohm • Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios

VLX Series Monoblock Class "DE" Digital Stereo Amplifier • 1800W x 1 Chan @ 1 Ohm • 900W x 1 Chan @ 2 Ohm • Magnetic Induction Regulated Drive Power Supply • Balanced Transformer-Less Logic Input

PB Series 1-Channel Class D Car Amplifier • 900W x 1 chan. @ 4 ohm • 1800W x 1 chan. Max • LED power and protection indicators • Tuned Bass EQ (0-18 dB bass boost) • Metallic finish and plating

• Max Power: 400W x 1 @ 4 ohm, 600W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 1200W
• Variable Low Pass Filter
• Dimensions: 10" W x 12.6" L x 2.4" H
• 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
• For Car Audio Systems Up To 1000 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 2-channel RCA Interconnect Cable

• 1 ohm: 1500 watts x 1 chan.
• Dual 2 ohm Voice Coil
• Extremely Rigid Non-Pressed Paper Cone Assembly
• Multilayered Polymer Wide Roll Foam Surround
• Wired remote bass level control included
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Signal to Noise Ration: >95 dB

XXV Series 2/1-Channel Ultra D Class Car Amplifier • 600W x 2 chan. @ 4 ohm• 1600W x 2 chan. @ 1 ohm • 3200W Max x 1 chan. • MOSFET power supply • Wired remote bass level control included • DC, Speaker Short, Thermal, and Overload Protection • Heavy duty aluminum alloy heatsink

Super D-Class Monoblock Amplifier • 2000W RMS x 1 @ 1 Ohm • Bass Remote Included • Illuminated Hifonics Logo • LPF (35 - 250Hz), Subsonic (15 - 35 Hz) • Line Level: 0.2 - 9V

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

Tarantula Series Monoblock Class D Car Amplifier • 1100W x 1 chan. @ 4 ohm • 2000W Max • Twin Stack Technology • Three-way protection circuitry • Pre-amp outputs • Variable low-pass filter

Soundstream Tarantula Series Monoblock Amp • 350W x 1-Chan. @ 4 Ohm • 520W x 1-Chan. @ 2 Ohm • MOSFET Power Supply • Twin Stack Technology • Variable Bass Boost • Bass Boost Remote • CEA-2006 Compliant

V Power Series Class D Monoblock Car Amplifier • 600W x 1 chan. @ 4 ohm • 2000W x 1 chan. @ 2 ohm • 4000W x 1 chan. Max approx. • MOSFET Power supply • Bass EQ 0-12dB at 50Hz • Continuously adjustable gain control • Thermal management control

Pioneer MonoBlock Amplifier • 800W x 1 chan. @ 2 ohm • input level/gain control • RCA input terminals • S/N Ratio: >100 dB • remote bass boost • high voltage input capability

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm, 800W x 1 @ 1 ohm
• Total Peak Power: 1500W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB
• Class D Circuitry
• Dimensions: 10-7/16"W x 2-3/8"D x 7-7/8"H

• Peak: 650W x 1 @ 4 ohm, 1300W x 1 @ 2 ohm, 2000W x 1 @ 1 ohm
• Total Peak Power: 2000W
• Wired Bass Remote Included
• Bass Boost: 0-10 dB
• 1 Pair of Preamp Outputs
• Dimensions: 14-7/8"L x 9"W x 2-1/2"H

Signs of installation
• RMS: 500 x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• DSP (Digital Signal Processing)
• Sophisticated Crossover Functions and Selectable Crossover Slopes
• Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H

• RMS Power: 1000W x 1 @ 4 ohm, 2000W x 1 @ 2 ohm, 4000W x 1 @ 1 ohm
• Total Peak Power: 4000W
• Fully Adjustable Pro-Design Crossovers
• Dimensions: 9.72" W x 12.6" L x 2.28" H

1200W RMS, Brutus BXi Series Class D Monoblock Amplifier • 450W x 1 Chan. @ 4 Ohm • 900W x 1 Chan. @ 2 Ohm • 1200W x 1 Chan. @ 1 Ohm • Super D-Class • Tuned Bass EQ • 1 Ohm Stable • Balanced Line Input