Car Amplifier Packages & Bundles for your 2012 Insight

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• Class H Amp Technology
• 4 Ohm Stable Bridged: 200 Watts RMS x 2
• Variable High and Low-Pass Filters
• Variable Crossover
• Full On Board Protection

• 150 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit

• 40 watts RMS x 4 @ 4 ohm
• 80 watts RMS x 4 @ 2 ohm
• 320 watts Total Power
• Switchable High-Pass Filters
• 0-12dB Boost
• Aluminum Heatsink
• Dimensions: 3.7" W x 5.51" L x 1.77" H
• Includes Belva BAK84 8 Gauge Amp Wiring Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

• 185 watts x 4 channel @ 4 ohm
• 375 watts x 4 channel @ 2 ohm
• Bridged: 750 watts x 2 channel @ 4 ohm
• Total RMS Power: 1500 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• DS18 SMD-300.4AB 1200W RMS Class AB 4-Channel Car Amplifier
• Wired Bass Remote for Precision Level Control
• NVX XKIT44 Full Spec 4 Gauge 100% OFC Wiring Kit
• Complete 4-Channel Copper Installation Solution with RCA
• High-Performance Setup for Amplifiers up to 1500 Watts

• 180 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• 4 ohm: 325 Watts x 1 chan. / 2 ohm: 600 Watts x 1 chan. / 1 ohm: 1200 Watts x 1 chan.
• Total power output: 1200 Watts
• Pulse Width Modulated MOSFET power supply
• Accu-Cross crossovers allow for complete control of the signal directing to all speakers
• The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
• Frequency Response: 10 - 250 Hz
• Includes Amplifier Wiring Kit

• DS18 SMD-2000.1D 2000W RMS Class D SMD Series Monoblock Car Amplifier
• Wired Bass Remote for Easy Level Control
• NVX XKIT02 100% Copper 1/0 Gauge True Spec Amplifier Installation Kit
• 1.0 Farad Digital Power Capacitor
• Complete Wiring Solution includes RCA Interconnects and 20 ft Speaker Cable

• DS18 SMD-5000.1D 5000W RMS Class D Monoblock Car Amplifier
• Integrated VM-1 Voltmeter and Digital RGB LED Lights with Remote
• NVX 1.0 Farad Digital Power Capacitor and Bass Remote
• True Spec 1/0 Gauge 100% Copper Amplifier Installation Kit
• Complete Wiring Solution with RCA Interconnect and 20 ft Speaker Cable

• 60 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: @ 4 ohm
• Total RMS Power: 400 watts
• Class A/B 2 ohm Stable 4-Channel-Channel Amplifier (Red)
• Includes Amplifier Wiring Kit

• Variable Electronic Crossover
• Bass Remote Included
• Subsonic Filter
• Switchable Bass Boost

• 4 ohm: 50 watts x 4 chan.
• 2 ohm: 75 watts x 4 chan.
• Total Peak Power: 600 Watts
• Speaker Level Input
• Signal Sensing Turn-On
• Variable Low Pass/High Pass Filter
• Includes Amplifier Wiring Kit

• RMS: 75 watts x 4 chan. + 150 watts x 1 chan. @ 4 ohm, 125 watts x 4 chan. + 300 watts x 1 chan. @ 2 ohm
• CEA-2006 Compliant
• Features C.L.E.A.N. Set-up
• Protected against Dust, UV, & Corrosion
• Marine grade two part epoxy coating on circuit boards
• Includes NVX XKIT46 4 Gauge Amp Wiring Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• Dimensions: 8-1/2"L x 6-3/4"W x 2"H

• 100 Watts RMS x 4 @ 4 ohm
• 150 Watts RMS x 4 @ 2 ohm
• 125 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 1200 Watts
• CTA-2006 Compliant/Preamp Outputs/LPF
• Hi-Res Audio
• Gold-plated RCA connections
• Includes Amplifier Wiring Kit
• 10-3/8"W x 2-3/8"H x 7-7/8"D

• 5-Channel amplifier
• RMS Power: _125W x 4 @ 4 ohm, 200 W x 4 @ 2 ohm, 500W x 1 @ 2 ohm
• Select summing capabilities
• Eight speaker input

• 60 Watts x 4, 400W x Sub Channel RMS @ 4 ohm
• 75 Watts RMS x 4, 600W x Sub Channel @ 2 ohm
• Total Peak Power: 1800 Watts
• CEA-2006 Compliant
• Remote Bass Knob Included
• Heavy Duty Aluminum Heatsink
• Dimensions:10-1/4" W x 6-5/8" L x 1" H

• 60 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 170 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class D 2 ohm Stable 4-Channel Amplifier
• Includes Amplifier Wiring Kit

• 50 Watts RMS x 4 @ 4 ohm
• 75 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 150 Watts
• CEA-2006 Compliant
•Variable On Board Punch EQ
• 1.9" x "6.8" x "10.1"

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

• 500 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 2 ohm
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H
• Includes Amplifier Wiring Kit

• 300 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• Includes Amplifier Wiring Kit

• 60 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class A/B 2 ohm Stable 4-Channel-Channel Amplifier (Black)
• Includes Amplifier Wiring Kit

• 50 Watts RMS x 4 @ 4 ohm
• 100 Watts RMS x 4 @ 2 ohm
• 200 Watts RMS x 2 @ 4 ohm, Bridged
• Built In NOMAD "Real Time" Analog Computer
• 4/3/2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability

• 200 watts x 2 channel @ 4 ohm
• 350 watts x 2 channel @ 2 ohm
• Bridged: 1400 watts x 1 channel @ 4 ohm
• Total RMS Power: 700 watts
• CEA-2006 Compliant
• Includes Amplifier Wiring Kit

• 200 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 500 Watt True RMS Output
• Marine Certified Monoblock Micro Class D Amplifier
• 180W x 1-Chan. @ 4 ohm
• 320W x 1-Chan. @ 2 ohm
• 500W x 1-Chan. @ 1 ohm
• Extremely Small Footprint
• Includes Amplifier Wiring Kit

• 100 Watts Max x 1 @ 4 ohm
• 2000 Watts Max x 1 @ 2 ohm
• 4000 Watts Max x 1 @ 1 ohm
• Total Max Power: 4000 watts Watts
• 96dB Signal to noise ratio
• Includes Amplifier Wiring Kit

• 125 watts x 2 channel @ 4 ohm
• 250 watts x 2 channel @ 2 ohm
• Total Peak Power: 500 watts
• Class A/B 2 ohm Stable 2-Channel-Channel
• Includes Amplifier Wiring Kit

• Power Pack 4-Channel Class D for Select Alpine In-Dash Receivers
• 45W x 4 Chan. @ 4 Ohm
• Adjustable Gain Switch
• Plug-and-Play
• CEA-2006 Compliant

• 250 watts x 1 channel @ 4 ohm
• 400 watts x 1 channel @ 2 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable Monoblock Amplifier
• Top-Mounted LCD Panel for Tuning
• Includes Amplifier Wiring Kit

• Rockford Fosgate R500X1D 500W RMS Prime Monoblock Amplifier
• Belva BAK42 Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Belva BB1D 1.0 Farad Capacitor
• RMS: 500W x 1 @ 2 ohm
• Premium Power and Ground Wire Provides Optimal Power Transfer

• 150 Watts RMS x 2 @ 4 ohm
• 300 Watts RMS x 2 @ 2 ohm
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 900 Watts RMS
• CEA-2006 Compliant
• Removable crossover/level control cover
• Conformal coated PCB boards
• Mono or 2 channel operation

• 100W x 2 Chan. @ 4 ohm
• 150W x 2 Chan. @ 2 ohm
• Built In NOMAD "Real Time" Analog Computer
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• MESHA3 Reduces MOSFET Temperatures for Improved Durability

• 125 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 700 Watts
• CEA-2006 Compliant
• 0 to 12 dB Bass Boost
• Aluminum Heatsink
• For Powersports Applications
• Includes NVX XKIT84 8 Gauge Amp Wiring Kit