Line Out Converters

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 2-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 2-Channel Line Out Converter
• 2 inputs and 2 outputs
• Compact design

• 6-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• 5-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• 2-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)

• 2-Channel Speaker High->Low Level Converter
• Accepts head units with 80 watts per channel
• Transformer circuit for noise cancellation

• Converts 10 to 30 watts per channel with a fixed 10:1 conversion
• Great for getting an additional set of pre-amps outputs from a head unit equipped with only one set

• 2-Channel line output converter harness kit

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 2-Channel Premium Adjustable Line Output Converter
• 3:1 Step Down With Adjustable Output
• 300w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 2-Channel Micro Line Output Converter
• Input Circuit corrects crossover distortion
• Individual adjustable outputs
• Auto turn-on via DC offset
• Compact design allows for easy install

&bull 4-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 2-Channel Line Output Converter
• Designed for adding or retaining an amplified system
• Accepts both high-level and low-level inputs
• Remote level controller included

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

• LPH speaker extension harness
• Compatible plugs and color-coded wires
• Length: 17 feet

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• 4-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 80w Maximum Input total (40w per channel)

• Line out converter for adding amplifier to factory radio
• Auto remote turn on
• 6:1 step down with adjustable output
• 100 Watts Max
• 50 Watts max per channel

• 4-Channel Micro Line Output Converter
• Input Circuit corrects crossover distortion
• Individual adjustable outputs
• Auto turn-on via DC offset
• Compact design allows for easy install

• 2-Channel Premium Adjustable Line Output Converter
• 3:1 Step Down With Adjustable Output
• 300w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 2-Channel Premium Adjustable Line Output Converter
• 3:1 Step Down With Adjustable Output
• 300w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 4-Channel Micro Line Output Converter
• Input Circuit corrects crossover distortion
• Individual adjustable outputs
• Auto turn-on via DC offset
• Compact design allows for easy install

• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 80w Maximum Input total (40w per channel)

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• Two Channel Output Converter
• Gold Plated RCA Jacks
• Stinger Select Series

• 2-Channel line output converter with amplifier turn-on
• Adjustable gain for each channel
• Small and compact in size
• Detects presence of audio signal

• 8-Channel Line Out Converter
• Auxiliary input for iPod, satellite radio, or other audio sources
• Dash control for subwoofer level, auxiliary volume, and source selection

• 4-channel active line out converter
• Speaker Level handles up to 400W RMS
• Selectable turn-on mode
• 9.5Vrms output
• 12-volt turn-on lead output

• Adjustable 2-channel line output converter
• 2-channel input
• Separate level adjustments for each channel
• Molded channels

• Universal 2-Channel line output converter
• Features short circuit protection
• 6:1 step down with variable output
• Corrects crossover distortion
• Detachable input plug and gold plated RCAs

• 5-Channel line output converter
• 2/5-Channel input configurations
• Auto turn-on (Audio / DC / Remote)
• Anodized aluminum housing with noise protection

• 4-Channel High-to-Low Level Converter
• High-to-Low Signal Converter to Connect 4-Channel Amplifiers to Radios Without RCA Output
• Output Voltage: Up to 3V (low-level)
• Mounting: Behind Dash

• 4-Channel Line Output Converter
• Connects the speaker level to RCA line level
• Perfect for connecting a factory stereo to an aftermarket amplifier
• Gold plated RCA connections

• Universal 4-channel line-out converter
• 80 watts peak input per channel, with 12 volts signal sense
• Adjustable gain for each channel
• Input circuit corrects crossover distortion found on other brands

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 2-channel input
• Molded channels for zip ties will not slip
• 12-volt signal sense turn-on
• Universal application

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• Fixed level
• 2-channel input
• 30-watts maximum input

• Plug and Play Design (No cutting or splicing)
• Peak Input: 80 watts
• Designed to provide 4 channels of low-level audio

• 6-Channel line output converter
• 2/6-Channel input configurations
• Auto turn-on (Audio / DC / Remote)
• Anodized aluminum housing with noise protection
• Dash remote bass level control included

• 4-Channel line output converter
• 2/4-Channel input configurations
• Auto turn-on (Audio / DC / Remote)
• Anodized aluminum housing with noise protection

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 2-Channel Speaker Level Inputs
• 2-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

• Active 4-channel line output converter
• Speaker level and low-level inputs
• Selectable Load Modes: 20-ohms, 60-ohms, and 20000-ohms
• Turn-on Modes: Remote, Vox (Audio Signals), and DC
• Ground Isolation Switch: 200-ohms, ISO, and Ground

• Active 4-channel line out converter
• Designed to integrate with aftermarket or factory OEM systems
• Preamp outputs: 2 sets
• Precision matched stereo and level gain adjustment
• Advanced ground isolation switch isolation prevents buzz and interference

• Active 4-channel line output converter
• Speaker level and low-level inputs
• Selectable Load Modes: 20-ohms, 60-ohms, and 20000-ohms
• Turn-on Modes: Remote, Vox (Audio Signals), and DC
• Ground Isolation Switch: 200-ohms, ISO, and Ground

• 2-Channel line output converter
• 20V/40V input select
• Auto turn-on (Audio / DC / Remote)
• Anodized aluminum housing with noise protection

• Active 2-channel line out converter
• Designed to integrate with aftermarket or factory OEM systems
• Preamp outputs: 2 sets
• Precision matched stereo and level gain adjustment
• Advanced ground isolation switch isolation prevents buzz and interference

• 2-Channel lossless audio line output converter
• Lossless audio, double step down ratio
• Compact size with level matching controls (High/Low)
• Selectable auto turn-on remote out
• Features noise rejection and speaker emulator

• Active 6-channel line out converter
• Designed to integrate with aftermarket or factory OEM systems
• Preamp outputs: 3 sets (front, rear and subwoofer)
• Precision matched stereo and level gain adjustment
• Advanced ground isolation switch isolation prevents buzz and interference