Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. JBL Store
  3. Discontinued JBL Car Audio & Electronics
  4. Discontinued JBL Car Subwoofers
  5. Discontinued JBL 10" Car Subwoofers

Discontinued JBL 10" Car Subwoofers

JBL 10" Car Subwoofers are compact yet powerful, adding depth to your car's audio system.

Filters
JBL ✕
Clear Filters
Reset Done
Product Type
Price Range
RMS Power Handling
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak Power Handling
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Subwoofer Size
Refers to the diameter of the subwoofer, measured in inches.
Shallow Mount Installation
This means that the subwoofer/speaker is designed to be installed in areas that do not have a lot of space. Shallow mount subwoofers are typically found under a seat or behind the seat in some trucks.

Shallow mount speakers will typically have a mounting depth of 2" or less, while shallow mount subwoofers will typically have a mounting depth of 3" or less.
Top-Mount Depth (Mounting Depth)
The depth when installed on top of the mounting surface. Measured from the bottom of the speaker's magnet to the bottom of the mounting holes on the rim of the speaker.
Voice Coil(s)
Dual voice coil subs have more wiring flexibility than single voice coils subs; however, single voice coil subwoofers provide easier hookup options for wiring multiple subwoofers in parallel or series. You may also run a dual voice coil (DVC) sub in parallel, series, or combination. A quad voice coil has four voice coils and is equal to two dual voice coil subwoofers as far as wiring goes.
Impedance (Per Voice Coil)
The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
Subwoofer Design
This is the design of the subwoofer or the opening of the subwoofer enclosure. Each design has it's own benefits, whether it is a square, circle, or oval.

Round/Circle: This is the typical and common subwoofer design. They have a round cone and are a circle in design.

Square: These woofers are able to achieve a greater cone area in a smaller space. Because of the greater surface area, some square subwoofers will be louder than a round subwoofer of the same size.

Minimum Sealed Box Volume
This value indicates the minimum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Maximum Sealed Box Volume
This value indicates the maximum sealed box volume that the manufacturer recommends for the subwoofer. The volume is typically displayed in cubic feet.
Sensitivity
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
  Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
Main Cone Color
This is the color of the speaker's or subwoofer's cone.
Recommended Enclosure Type
This is the recommended type of enclosure that the subwoofer should be installed into. Some subwoofers are specially designed for particular enclosures.

Sealed: These enclosures completely enclose the air inside the box. These boxes produce a tight bass.

Ported/Vented: These enclosures have a slot of air to escape from the box. The result is a sound that has more "boom".

Bandpass: These are a combination of both sealed and ported enclosures. They can be very efficient, but require tuning for the best response.

Xmax (millimeters)
Typically measured in millimeters, the Xmax value is the measure of a speaker cone's maximum excursion in one direction while maintaining a linear behavior.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

JBL MS-Bass Pro SQ (MS-BassProSQ)

450 Watt 10" All-in-one Powered, High-end Ported Subwoofer Enclosure Bass System with Built-in Amplifier

MS-BassProSQ big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL MS-Bass Pro SQ (MS-BassProSQ)

450 Watt 10" All-in-one Powered, High-end Ported Subwoofer Enclosure Bass System with Built-in Amplifier

• 300W RMS Single 10" Bass-reflex Subwoofer Enclosure with (Built-In Amplifier
• Slipstream port technology eliminates port noise
•Built-in Class D amplifier
• Inputs accept both speaker-level and line-level signals
• Perforated black metal grille included/built-in
• Rugged, matte-black finish

13

• 300W RMS Single 10" Bass-reflex Subwoofer Enclosure with (Built-In Amplifier
• Slipstream port technology eliminates port noise
•Built-in Class D amplifier
• Inputs accept both speaker-level and line-level signals
• Perforated black metal grille included/built-in
• Rugged, matte-black finish

JBL GTO1014

350W 10" GTO Series Single 4 ohm Subwoofer

GTO1014 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL GTO1014

350W 10" GTO Series Single 4 ohm Subwoofer

• 1400W Peak
• 350W RMS
• Polypropylene cone woofer
• Rubber surround
• Tinsel wire protector
• Die-cast aluminum basket
• 2" Single 4 ohm voice coil

10

• 1400W Peak
• 350W RMS
• Polypropylene cone woofer
• Rubber surround
• Tinsel wire protector
• Die-cast aluminum basket
• 2" Single 4 ohm voice coil

JBL CS1014

125W 10" CS Series Single 4 Ohm Subwoofer

CS1014 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL CS1014

125W 10" CS Series Single 4 Ohm Subwoofer

• Peak Power: 500W
• RMS Power: 125W
• Impedance: 4 ohm
• Polypropylene Cone
• Rubber Surround
• Resonance Frequency (Fs): 30 Hz

28

• Peak Power: 500W
• RMS Power: 125W
• Impedance: 4 ohm
• Polypropylene Cone
• Rubber Surround
• Resonance Frequency (Fs): 30 Hz

JBL GT5-10D

275W 10" GT Series Dual 4 ohm Subwoofer

GT5-10D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL GT5-10D

275W 10" GT Series Dual 4 ohm Subwoofer

• 1000W Peak
• 275W RMS
• Dual 4 Ohm
• Polypropylene Woofer
• Hi-Roll Rubber Surround
• Progressive Spider
• Fully Vented Motor Structure
• Rubber-Coated Tinsel Leads

17

• 1000W Peak
• 275W RMS
• Dual 4 Ohm
• Polypropylene Woofer
• Hi-Roll Rubber Surround
• Progressive Spider
• Fully Vented Motor Structure
• Rubber-Coated Tinsel Leads

JBL GT5-10

250W 10" GT Series Single 4 ohm Subwoofer

GT5-10 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL GT5-10

250W 10" GT Series Single 4 ohm Subwoofer

• 1100W Peak
• 250W RMS
• Impedance: Single 4 ohm
• Polypropylene cone woofer
• High-roll rubber surround
• Progressive spider
• Vented pole piece
• Fully vented motor structure

18

• 1100W Peak
• 250W RMS
• Impedance: Single 4 ohm
• Polypropylene cone woofer
• High-roll rubber surround
• Progressive spider
• Vented pole piece
• Fully vented motor structure

JBL S3-1024 **Toggle between 2-Ohm & 4-Ohm Impedance!**

1350W 10" Series III Subwoofer with Selectable 2-Ohm or 4-Ohm Impedance

S3-1024 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL S3-1024 **Toggle between 2-Ohm & 4-Ohm Impedance!**

1350W 10" Series III Subwoofer with Selectable 2-Ohm or 4-Ohm Impedance

• 450 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI (Selectable Smart Impedance)
• Oversized 3.0" Voice Coil
• Premium 8 AWG Screw-down Terminals
• Sensitivity: 91dB

6

• 450 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI (Selectable Smart Impedance)
• Oversized 3.0" Voice Coil
• Premium 8 AWG Screw-down Terminals
• Sensitivity: 91dB

JBL MS-10SD2 Slim

500W 10" SLIM Series Shallow Mount Dual 2-ohm Subwoofer

MS-10SD2 Slim big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL MS-10SD2 Slim

500W 10" SLIM Series Shallow Mount Dual 2-ohm Subwoofer

• 1000W Peak
• 200-500W RMS
• Dual 2-ohm Voice Coil
• Flat-Piston Polypropylene Cone
• Dual-Roll Laminated Fabric Surround
• Progressive Spider
• Cast-Aluminum Frame

1

• 1000W Peak
• 200-500W RMS
• Dual 2-ohm Voice Coil
• Flat-Piston Polypropylene Cone
• Dual-Roll Laminated Fabric Surround
• Progressive Spider
• Cast-Aluminum Frame

JBL MS-10SD2

600W RMS 10" MS Series Dual 2 ohm Subwoofer

MS-10SD2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL MS-10SD2

600W RMS 10" MS Series Dual 2 ohm Subwoofer

• 1200W Peak
• 600W RMS
• Dual 2 ohm
• Polypropylene Cone
• Polyurethane/Fabric Surround
• Sealed and Vented Enclosures
• Aluminum Frame
• 44 oz. Barium Ferrit Magnet

2

• 1200W Peak
• 600W RMS
• Dual 2 ohm
• Polypropylene Cone
• Polyurethane/Fabric Surround
• Sealed and Vented Enclosures
• Aluminum Frame
• 44 oz. Barium Ferrit Magnet

JBL S2-1024 **Toggle between 2-Ohm & 4-Ohm Impedance!**

1000w 10" Series II Subwoofer with Selectable 2 Ohm or 4 Ohm Impedance

S2-1024 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL S2-1024 **Toggle between 2-Ohm & 4-Ohm Impedance!**

1000w 10" Series II Subwoofer with Selectable 2 Ohm or 4 Ohm Impedance

• 250 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI™ (Selectable Smart Impedance)
• Oversized 2.0" Voice Coil
• Sensitivity: 92 dB

9

• 250 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI™ (Selectable Smart Impedance)
• Oversized 2.0" Voice Coil
• Sensitivity: 92 dB

JBL GTO1014D

350W 10" GTO Series Dual 4 ohm Subwoofer

GTO1014D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL GTO1014D

350W 10" GTO Series Dual 4 ohm Subwoofer

• 1400W Peak
• 350W RMS
• Polypropylene cone woofer
• Rubber surround
• Tinsel wire protector
• Die-cast aluminum basket
• 2" Single 4 ohm voice coil

20

• 1400W Peak
• 350W RMS
• Polypropylene cone woofer
• Rubber surround
• Tinsel wire protector
• Die-cast aluminum basket
• 2" Single 4 ohm voice coil

JBL CS1014 (Open Box, Complete)

125W 10" CS Series Single 4 Ohm Subwoofer - Open Box, Good Condition Used

CS1014 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL CS1014 (Open Box, Complete)

125W 10" CS Series Single 4 Ohm Subwoofer - Open Box, Good Condition Used

• Peak Power: 500W
• RMS Power: 125W
• Impedance: 4 ohm
• Polypropylene Cone
• Rubber Surround
• Resonance Frequency (Fs): 30 Hz

• Peak Power: 500W
• RMS Power: 125W
• Impedance: 4 ohm
• Polypropylene Cone
• Rubber Surround
• Resonance Frequency (Fs): 30 Hz

JBL 500 Watt Dual 10" Complete Bass Package

Dual 250W 10" GT Series Dual 4 ohm Subwoofers with Sealed Enclosure and 600W RMS Class A/B 2-Channel Amplifier with Installation Kit

GT5-10D_BB15002v2_MDFD10 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL 500 Watt Dual 10" Complete Bass Package

Dual 250W 10" GT Series Dual 4 ohm Subwoofers with Sealed Enclosure and 600W RMS Class A/B 2-Channel Amplifier with Installation Kit

• 1000W Peak
• 275W RMS
• Dual 4 Ohm
• Polypropylene Woofer
• Hi-Roll Rubber Surround
• Progressive Spider
• Fully Vented Motor Structure
• Rubber-Coated Tinsel Leads
• Amplifier 170 Watts RMS x 2 @ 4 ohm
• 300 Watts RMS x 2 @ 2 ohm
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 1500 Watts
• 1 Pair of Preamp Outputs
• Variable low-pass filter (50-250 Hz, 12 dB/octave)
• Variable high-pass filter (50-250 Hz, 12 dB/octave)
• 3/4" MDF Enclosure
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• 1000W Peak
• 275W RMS
• Dual 4 Ohm
• Polypropylene Woofer
• Hi-Roll Rubber Surround
• Progressive Spider
• Fully Vented Motor Structure
• Rubber-Coated Tinsel Leads
• Amplifier 170 Watts RMS x 2 @ 4 ohm
• 300 Watts RMS x 2 @ 2 ohm
• 600 Watts RMS x 1 @ 4 ohm, Bridged
• Total Peak Power: 1500 Watts
• 1 Pair of Preamp Outputs
• Variable low-pass filter (50-250 Hz, 12 dB/octave)
• Variable high-pass filter (50-250 Hz, 12 dB/octave)
• 3/4" MDF Enclosure
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

JBL MS-10SD4

600W RMS 10" MS Series Dual 4 ohm Subwoofer

MS-10SD4 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL MS-10SD4

600W RMS 10" MS Series Dual 4 ohm Subwoofer

• 1200W Peak
• 600W RMS
• Dual 4 ohm
• Polypropylene Cone
• Polyurethane/Fabric Surround
• Sealed and Vented Enclosures
• Aluminum Frame
• 44 oz. Barium Ferrit Magnet

• 1200W Peak
• 600W RMS
• Dual 4 ohm
• Polypropylene Cone
• Polyurethane/Fabric Surround
• Sealed and Vented Enclosures
• Aluminum Frame
• 44 oz. Barium Ferrit Magnet

JBL S3-1024 **Toggle between 2-Ohm & 4-Ohm Impedance!** - Open Box, Good Condition (Used)

1350W 10" Series III Subwoofer with Selectable 2-Ohm or 4-Ohm Impedance Open Box Complete (Good, Used)

S3-1024 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL S3-1024 **Toggle between 2-Ohm & 4-Ohm Impedance!** - Open Box, Good Condition (Used)

1350W 10" Series III Subwoofer with Selectable 2-Ohm or 4-Ohm Impedance Open Box Complete (Good, Used)

• 450 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI (Selectable Smart Impedance)
• Oversized 3.0" Voice Coil
• Premium 8 AWG Screw-down Terminals
• Sensitivity: 91dB

• 450 Watts RMS
• Polypropylene Cone
• Nitrile Butadiene Rubber (NBR) Surround
• SSI (Selectable Smart Impedance)
• Oversized 3.0" Voice Coil
• Premium 8 AWG Screw-down Terminals
• Sensitivity: 91dB

JBL GT5-10 - Open Box, Good Condition (Used)

250W 10" GT Series Single 4 ohm Subwoofer Open Box Complete (Good, Used)

GT5-10 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL GT5-10 - Open Box, Good Condition (Used)

250W 10" GT Series Single 4 ohm Subwoofer Open Box Complete (Good, Used)

• 1100W Peak
• 250W RMS
• Impedance: Single 4 ohm
• Polypropylene cone woofer
• High-roll rubber surround
• Progressive spider
• Vented pole piece
• Fully vented motor structure

• 1100W Peak
• 250W RMS
• Impedance: Single 4 ohm
• Polypropylene cone woofer
• High-roll rubber surround
• Progressive spider
• Vented pole piece
• Fully vented motor structure

** DO NOT USE - DUPLICATE ** JBL Stage 1010AM

900W Max (225W RMS) 10" Stage Series Single 4 ohm Car Subwoofer

DO NOT UDE Stage 1010AM big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

** DO NOT USE - DUPLICATE ** JBL Stage 1010AM

900W Max (225W RMS) 10" Stage Series Single 4 ohm Car Subwoofer

• 900 Watts Max
• 225 Watts RMS
• Polypropylene Cone
• Rubber Surround
• Competitively Tuned
• Sensitivity: 89dB

• 900 Watts Max
• 225 Watts RMS
• Polypropylene Cone
• Rubber Surround
• Competitively Tuned
• Sensitivity: 89dB

JBL MS-10SD4 Slim

500W 10" SLIM Series Shallow Mount Dual 4-ohm Subwoofer

MS-10SD4 Slim big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL MS-10SD4 Slim

500W 10" SLIM Series Shallow Mount Dual 4-ohm Subwoofer

• 1000W Peak
• 200-500W RMS
• Dual 4-ohm Voice Coil
• Flat-Piston Polypropylene Cone
• Dual-Roll Laminated Fabric Surround
• Progressive Spider
• Cast-Aluminum Frame

4

• 1000W Peak
• 200-500W RMS
• Dual 4-ohm Voice Coil
• Flat-Piston Polypropylene Cone
• Dual-Roll Laminated Fabric Surround
• Progressive Spider
• Cast-Aluminum Frame

JBL GTO1014 (Open Box)

350W 10" GTO Series Single 4 ohm Subwoofer

LS-GTO1014-OB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL GTO1014 (Open Box)

350W 10" GTO Series Single 4 ohm Subwoofer

• 1400W Peak
• 350W RMS
• Polypropylene cone woofer
• Rubber surround
• Tinsel wire protector
• Die-cast aluminum basket
• 2" Single 4 ohm voice coil

10

• 1400W Peak
• 350W RMS
• Polypropylene cone woofer
• Rubber surround
• Tinsel wire protector
• Die-cast aluminum basket
• 2" Single 4 ohm voice coil

JBL GT5-10D Open Box Complete (Very Good, Used)

275W 10" GT Series Dual 4 ohm Subwoofer

GT5-10D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL GT5-10D Open Box Complete (Very Good, Used)

275W 10" GT Series Dual 4 ohm Subwoofer

• Item Condition: Open Box
• 1000W Peak
• 275W RMS
• Dual 4 Ohm
• Polypropylene Woofer
• Hi-Roll Rubber Surround
• Progressive Spider
• Fully Vented Motor Structure
• Rubber-Coated Tinsel Leads

• Item Condition: Open Box
• 1000W Peak
• 275W RMS
• Dual 4 Ohm
• Polypropylene Woofer
• Hi-Roll Rubber Surround
• Progressive Spider
• Fully Vented Motor Structure
• Rubber-Coated Tinsel Leads

JBL CLUB 1024 (Open Box, Complete)

1000W Max (250W RMS) 10" Club Series Single Selectable 2 or 4 ohm Car Subwoofer

JBLCLUB1024AM big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

JBL CLUB 1024 (Open Box, Complete)

1000W Max (250W RMS) 10" Club Series Single Selectable 2 or 4 ohm Car Subwoofer

• 1000 Watts Max
• 250 Watts RMS
• Polypropylene Cone
• Rubber Surround
• Selectable 2 or 4 ohm Impedance
• 2" Voice Coil

1

• 1000 Watts Max
• 250 Watts RMS
• Polypropylene Cone
• Rubber Surround
• Selectable 2 or 4 ohm Impedance
• 2" Voice Coil

1 2 3 4 5 Next

Items per page: 20 40 60

    Clear all

    JBL 10" Car Subwoofers Information

    JBL carries a range of 10" car subwoofers for the bass you've been looking for. JBL engineers competition grade subwoofers that will both satisfy and last. Great for subwoofer boxes and other installations, these 10" JBL subs are an easy choice.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2014 Ram 2500

    2020 Ford Edge

    2011 Kia Sorento

    2012 Subaru Forester

    2014 Chevrolet Sonic

    2001 Toyota Corolla

    2016 Buick Encore

    2000 Volkswagen Beetle

    2016 BMW M2

    2001 Chrysler Prowler

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This page was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2020 Edge
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo