






600 Watt Peak (300W RMS) CX Series 4-Channel Bridgeable Class-D Car Amplifier
• 75 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 12-7/16"L x 2-3/8"H
• 75 Watts RMS x 4 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low/High-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 12-7/16"L x 2-3/8"H
The CX Series spans all kinds of systems, whether you're just trying to get a little more out of your factory radio or you're ready to blow the doors off with a completely aftermarket setup. Either way, the quality of your sound is at the heart of the CX Series. Sleek, simple styling and installation flexibility all round out the amplifiers' functionality.
Kicker makes your installation simple, but gives you plenty of options. Make it easy on yourself when plugging in with Kicker's KISL so you can take high-level signal from the headunit's speaker outputs straight into the amp's RCA input. Also, most models are just more than two inches thick and included brackets allow you to install these vertically. If space is at a premium in your ride, the CX series gives off plenty of power while saving you some room.
The CXA300.4 will make sure your cabin speakers have all the power they need. This Class-D 2-ohm stable 4-channel amp is built to handle 75 watts at 2 ohms for 4 channels, 40 watts at 4 ohms on 4 channcels, or 150 watts at 4 ohms for 2 channels when bridged, and the subwoofer channel can pump out 300 watts at 2 ohms.
With a total power output at 600 watts, 3-way protection circuitry and a pulse width modulated power supply, the CXA300.4 will power your speakers for the long haul.
The CX Series has a lot of built-in technology to make sure your system just keeps going for the long haul. With litz-wound transformers to maximize power transfer while minimizing power loss, high current switching, buffered RCA outputs, these amps are built to put out lasting, quality power.
These amps also include their own crossovers and an adjustable KickEQ Bass Boost. A 3-second turn-on delay helps eliminate any additional interference that might affect your system.
But these amps also have Kicker's Failsafe Integration Technology inside. That means they can take signal from any audio source and run it straight into the amp. For you, it means no need for line-out converters, step down modules, processors or less conventional wiring to complete your system. Kicker's FIT eliminated the need for additional equipment that could introduce additional noise to your signal. It even works well with factory amplified systems from other premium brands.
For a potent, versatile power solution for your sound system, pick up as many CX Series amps as you need here at Sonic Electronix. Add one, or however many you need, to your cart today.
Internal Product ID:
107703
Really Good Amp!!
The sound of the music is so crisp and clean. It truly is one of the cleanest and clearest amps that I've heard in a long time. Thank you Kicker for another great product.
301
found this helpful.Great amp
Been wanting to try out some Kicker products for a while. Planned to just add a sub, but decided to add more power for the other 4 speakers as well. Great sound, and plenty of power on tap for my small extended cab truck.
54
found this helpful.A good sounding amp
I liked it a lot, it made the speakers loud and very crisp notes of music
43
found this helpful.Great!!!!
Kicker makes great amps, I got this amp to replace a MTX amp, this Kicker amp hits and sounds way louder than the MTX, and the guys at sonic are awesome and I got my equipment fast, thanks guys!
9
found this helpful.Best selling similar products