• 4 ohms: 80 watts x 4 chan. + 350 x 1 chan.
• 2 ohms: 125 watts x 4 chan. + 600 x 1 chan.
• Bridged, 4 ohms: 250 watts x 2 chan. + 600 x 1 chan.
• 5/4/2 Channel Operation
Spend $50 or more a get a FREE NVX Black Reusable Cloth Face Mask. This offer cannot be combined with any other coupons or offers.
Priced separately $394 98
Bundle Savings of $4 99
Total bundle price:
Enjoy 20% off the NVX VAD11005 5-channel amplifier with purchase of select speakers. This offer cannot be combined with any other coupons or offers.
Get powerful performance with the NVX VCW102 and save 20% with purchase of select amplifiers. This offer cannot be combined with any other coupons or offers.
Save 25% Off an SMD DD-1 Distortion Detector with the purchase of a Qualifying Amplifier. Simply Click the "Add Both to Cart" button below.
Priced separately $579 94
Bundle Savings of $47 49
Total bundle price:
For a limited time, save $10 on a roll of NVX SDVK4 Sound dampening with a qualifying purchase! Sound deadening will eliminate rattles and improve the sound and output of your system! This offer cannot be combined with any other coupons or offers.
If you're looking for big power, the VAD11005 is the amplifier for you. This amp delivers up to 125W of true RMS power to four channels plus an additional 600W channel for a subwoofer.
The VAD Line of amplifiers include a conformally coated, marine-grade circuit board. This allows this amplifier to be installed in nearly any application.
Class-D amplifiers like the NVX VAD Line of amplifiers are more efficient, produce less heat, and draw less current than traditional Class AB circuitry.
All amplifiers in this line are designed with built-in 3-way protection circuitry. This will protect your amplifier and your speakers by offering a number of different protections including thermal, overload, and speaker short protection. These help ensure the longevity of the amplifier and your system as a whole.
Overall rating distribution
By feature average rating
October 14, 2019
Can't go wrong!
Never having heard of NVX, understandably I was a bit reluctant. But the price for a 5 channel amp was hard to argue. My old boat had a fusion 5 channel amp, which was great, and is still going after 5 years, but also $600. The NVX is less than half the cost, and to be honest I believe more powerful. The kind folks at Sonic Electronix have always given me good advice, and they assured me I would not be disappointed with the NVX. They were not kidding. I have it hooked up to 4 JL Audio MX series speakers - two 650s and two 770s, plus a JL 10" M series sub, which is better than the MX sub. And I did opt for NVX's 5 channel amp install kit - definitely worth it.
For the head unit I went with a JBL gauge style PVR-275. It was inexpensive and had 3 sets of pre-amps, which I figured was important. I have to say, I'm floored by the overall performance. The system gets very loud, and stays clean at high volumes. I've had the system installed for only a month so far, but I couldn't be happier, and I can't believe a $6-800 amp would sound any better. Fingers crossed for years of enjoyment - that will be the true test.
September 9, 2019
I was one click away from purchasing an Alpine 5-channel amp but decided to give this NVX a shot instead after a lot of research. I'm glad I did. I saved hundreds and This thing is loud and clear. Built well and runs cool. Pushing Infinity speakers in all four corners of my Tacoma along with a Dayton Audio HO 10".
Friends and family have all been amazed with the sound. Great little amp.
March 25, 2019
NVX VAD11005 Great Amp
I was a big fan of the JAD900.5, Installed 4 of them. This new one is just as good but even more power. They also fixed the small annoying things on the 900. Such as the speaker inputs and power/ground input terminals, much nicer now. Nice and deep and also use allen screw, much more secure. Also the new one puts all the RCA connection to one side, so no more cable running in front of the adjustments. I installed with the NVX 5 channel amp kit, as well as the VSP65 component set and VSP65 speaker set and a sub of different Brand due to space constraints. Very pleased with the results. The 11005 is also much easier to mount due to the new case design. If your torn between the 2 amps, the 11005 is worth the cost difference over the 900.5
September 16, 2019
Another Great NVX Amp
I was really impressed with my previous JAD900.5 5-channel amp in my older car (used it for 5 years). Matched it with a NVX 12” sub and it was solid. So when I got my new car I went with the new VAD11005 & a step up on the 12” NVX sub. I love it! Plenty of controls, solid power & great sound. For the price & quality I am completely satisfied with NVX subs & amps. Highly Recommended!!
September 14, 2019
I purchased the VAD11005 to put in my 2018 F150. I'm running AudioControl LC7i behind the factory radio. A set of Pioneer TS-A6970F 5-way in the front doors and a set of Kenwood KFC-1696PS 6 1/2" in the rear with some dynamat. I used two 10" Apline Type R subs in a Fox Acoustic box. It's a huge difference from the factory. I used to have the volume on 10+ for basic listening now I keep around 3 or 4 and it sounds better.
March 24, 2020
Great Bang For the Buck
This amp did awesome used it in a 1993 C1500 pickup for a set of NVX 6.5" component speakers, a set of 4x6" Memphis speakers and 2 kicker CVR 10" subs. This thing was loud!! Once tuned it sounded awesome. They pack great power in this package! size-wise for a 5 channel, it is relatively small you could put under a seat if need be. OVerall great sound tunability and price!
February 28, 2020
Cape Horn 32
I'm using this to power 4 seven inch 200W Fusion Speakers and one 10 inch 600W sub-woofer. Music is coming from the NXV Bluetooth module. I have no other controls and my boat rocks! If you have good speakers you don't need anything else since the tunable filters are more than sufficient for both pairs and woofer. The included remote bass is useful but I find that once you have figured out what you like you really don't need to adjust. The subsonic filter is awesome. At full power, if you turn it to max the woofer vibrations in the boat drop substantially without having any impact on the sound. I mounted it inside of my center console so it won't be exposed to any elements other than salt air so the class D conformal should do the trick. I guess I will find out in three years or so. Absolutely love the way that it draws ZERO current until the Bluetooth module sends music (attach blue wire from BT to the amp and you're done).
December 15, 2019
I received the amplifier about a week ago, but just got around to installing it. This is a very good amplifier for the price. I using 6 and half components up front and 6x9 in the rear a 8 inch subwoofer in a ported box. It sounds very good. I very pleased with this amplifier.
June 22, 2019
Worth the Money!!!!
All I have to say is WOW! SQL is as good as these expensive amps that cost twice the money!!!! Good enough power for my speakers CT-sounds and for my JLw3v3-2. CLEAN CLEAR MUSIC!!.. Do not be fooled, I was hesitate to buy this product and I'm glad i did. Best Bang for the BUCK!
Best selling similar products
• The size of a postcard with 400 Watts True RMS Output!
• • MVP Series 4-Channel Micro Class D Amplifier
• 50W x 4-Chan. @ 4 ohms
• 100W x 4-Chan. @ 2 ohms
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!
• 8 Gauge 4-Channel Complete Amplifier Installation Kit
• For Car Audio Systems Up To 600 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 4-channel RCA Interconnect Cable
• RMS: 80 Watts x 4 @ 4 ohms, 150 Watts x 4 @ 2 ohms, Bridged: 300 Watts x 2 @ 4 ohm
• Total Peak Power: 1000 Watts
• Class D IR Chipset with DirectFET Power Mosfet Output
• Wired remote bass level control included
• Ultra Compact High Density Aluminum Alloy Chassis
• Dimensions: 4.02" W x 8.70" L x 1.40" H
• 50 Watts RMS x 4 @ 4 ohms
• 70 Watts RMS x 4 @ 2 ohms
• Total Peak Power: 280 Watts
• CEA-2006 Compliant/Preamp Outputs/LPF
• Frequency Response: 20 - 20,000 Hz
• Dimensions: 8.66"W x 3.09"D x 1.77"H
• 100 Watts RMS x 6 @ 4 ohms
• 150 Watts RMS x 1 @ 2 ohms
• CEA-2006 Compliant/Preamp Outputs/LPF
• Micro Amp
• 12.9"W x 4.4"L x 1.7"H
Internal Product ID: