Universal-Fit Audio for 1974 MG Midget

---

• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 4-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• Universal Single DIN storage pocket
• Install Single DIN in a Double DIN dash opening
• Mounts above or below the stereo
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture

• 8-Channel digital signal processo
• 80 total bands of equalization
• TüN software offers quick input/output setup
• 8 RCA inputs or 1 optical input
• Includes DRC-200 digital remote control

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 7.47"
• Sensitivity: 85 dB

• Weatherproof Bluetooth Marine Receiver
• For use with hideaway remote audio receiver or dash-mount controller
• Connects with up to 35 ft (11 meters) of wireless range
• IPX8 marine-grade rating

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• HPM Series Battery Terminal with Two 1/0 or 4ga Outputs
• (2) 1/0 Gauge or (2) 4 Gauge outputs
• Ultimate power protection
• Multiple output design
• Corrosion resistant satin chrome finish

• 600W Peak
• 300W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• 1/0 Gauge Dual Amplifier Power Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• Two brass and satin chrome distribution blocks
• CEA-2015 and BC5W2 Compliant

• Modified Sine Professional Grade Power Inverter
• 3000 watts RMS, 6000 watts Peak
• Includes direct to battery cables
• LED digital display indicator
• Rugged industrial design
• Remote controller LCD included

• Dual USB Replacement Panel
• Replace the existing USB panel when installing a new car stereo
• Includes two 26" cables
• Compatible with 2017-up vehicles from Ford

• Install Bay Diode
• 1 AMP
• Package of 20 Diodes

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 4-Channel SwitchHub Solid-State Relay
• Single 40-amp output and triple 20-amp outputs
• 100-amp combined continuous capacity
• Outputs can be triggered independently

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 670 watts x 1 channel @ 4 ohm
• 1100 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 10.88"
• Sensitivity: 84.387 dB

• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference

• Works with Most 5-1/4" Speakers
• Factory Style Finishes
• Heavy Duty ABS Plastic
• Works with 6" to 6.5" Speakers

• Ported enclosure with 2 12" CompR Series Subwoofer
• 1000 watts RMS (2000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 32-3/8" L x 16" H x 14" W x 17-1/4" W2

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• Pressed Paper cone
• Pressed Foam surround
• Mount depth: 4.45"
• Sensitivity: 87.5 dB

• 600 watts x 1 channel @ 4 ohm
• 800 watts x 1 channel @ 3 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 2-Channel Premium Adjustable Line Output Converter
• 3:1 Step Down With Adjustable Output
• 300w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 12-volt Absorbent Glass Mat (AGM) Secondary Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 750W car audio stereo systems
• Compatible with most vehicle applications

• 6.5" universal shallow mesh speaker grill
• Fits speakers and midranges
• Bolt-on easy installation
• Slim and shallow design
• Painted in matte black
• Sold individually/per piece

• Double-DIN Dash Kit
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Two 12" Punch Series Stage 1 Subwoofers
• Kevlar Reinforced Paper Cone
• Tear and Fatigue Resistant
• Proprietary Spider Venting/Cooling Technique
• Solid 5/8" MDF Construction

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 135 Amp Circuit Breaker
• Push Button Reset/Kill Switch
• Water resistant housing
• Protective rubber bolts caps
• Easily mount on firewall or other panels

• Universal Fender Mount Side View Camera
• Mounting Style: Fender Mount
• Resolution: 976 x 496 (600TV lines)
• Camera Housing Color: Black

• 15" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 2.10 cubic feet
• Premium Black Carpet with Black NVX Logo

• Battery Isolator and Relay
• 500 Amp
• Prevents Primary Battery Discharge
• Maximizes the Current Transfer
• Extends Battery Life
• Universal 12V Applications

• License Plate Camera Bracket
• Works exclusively with CAM-300 and CAM-400
• Powder coated black finish
• Mounts behind license plate

• 8" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .45 cubic feet
• Premium Black Carpet with Black NVX Logo

• 100A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• 50 watts x 2 channel @ 4 ohm
• 100 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.500"
• Color: Black

• 1 input for 6 output video signal splitter
• Hard aluminum body to protect the device
• Filters out incoming noises
• Small and compact size

• 1-Channel RCA Compact Noise Filter
• Number of channels: 1-Mono
• Input type: Female RCA
• Output type: Male RCA

• Video switch with trigger wires
• 4 camera input and 1 video output
• 4 trigger wires for each camera

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 16mm (5/8") mounting hole size
• Red LED illuminated ring

• For use with aftermarket sound systems or accessories like wenches
• Industrial-strength quadruple fuse holder
• Stainless steel hardware
• Also works in marine applications

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• Complete Port Tube Kit
• 2" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.

• 4"x5.35" Aluminum Super Bullet Tweeters
• 500 watts Peak Each
• 250 watts RMS Each
• 4 ohm Impedance

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier

• Universal 50" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes rear/side brackets and mounting hardware

• Replacement USB to Lightning cable for compatible iOs devices
• Supports charging and data transfer
• Length: 3 ft. (36")