Universal-Fit Audio for 1987 Mazda 626

---

• Load Generating Device and Signal Stabilizers
• Designed for non-amplified Dodge, Chrysler, Jeep and Maserati sound systems
• Generates load and stabilize signal from a non-amplified factory system
• Operating Impedance: 20 ohms

• Single 12" Vented MDF Enclosure
• Holds one 12" subwoofer
• 3/4 MDF (Medium Density Fiberboard) Construction
• Durable black carpeting
• Gold Terminals
• Internal Box Volume: 1.8 cubic ft.

• Gauge Reducer Adapter
• 1/0 Gauge Input to 4 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• Active 6-Channel Line Driver
• Increase pre-amp signal levels up to 9.5 volts RMS
• Matches the volume levels between different sources
• Two channels of input can drive all six outputs
• Each output can drive up to seven amplifiers

• 2-Way 5-Button Remote Car Starter
• With 4-Button Transmitter
• 1320 feet Range
• Antenna With Integrated Valet Switch & LED
• Built-in security features

• Gauge Reducer Adapter
• 4 Gauge Input to 8 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Chrome Plating

• Single Knob Surface Mount Housing Pod
• For use with Belva BAWLK, BA2USB or BAVTM

• Single Door Lock Actuator
• Converts Manual Doorlocks Into Power Doorlocks
• Two-Wire Reverse Polarity Operation
• Universal Mounting Hardware Included

• Converts internal wireless FM transmitter to a wired FM modulator
• Connects audio output with POD with FM modulator to car radio
• Designed for use with Audiovox SIRCK3 and XC9 vehicle kits

&bull Pair of Bass Blockers for 6" x 9" Speakers
• Blocks 0-300Hz @ 4 Ohm
• Blocks 0-150Hz @ 8 Ohm
• Filters Out Unwanted Frequencies Towards Speakers

• Fully Active, 2-Channel Remote Level Control and Line Driver with Pass-Through Outputs
• Minimizes Unwanted Noise
• Active Circuitry
• Control Knob
• Pass-Through Connection

• 200 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Easy reset/disconnect
• Can act as a master disconnect for circuits

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Compatible for Sundown SA 12V2 subwoofers (Sold separately)

• Dual Outlet Portable Power Inverter
• Surge Power Output: 600 watts
• Continuous Power Output: 300 watts
• USB port included for charging compatible devices
• Internal cooling fan keeps the inverter from overheating

• 3-way Passive Crossover Network
• Designed to expand a 2-way component system into a 3-way setup
• Ideal for adding a midrange driver to your 2-way component system
• Includes woofer, midrange and tweeter outputs
• Compatible with AudioControl PNW and Altitude Series speakers

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• For positive or negative battery post use
• Add a Post System
• >Solid brass construction

• 7 Meters
• 12 Gauge Speaker Wire
• High Strand Count for Maximum Flexibility
• 23 Foot Length

• 12" Grille made specifically for the JL Audio 12W1v2, 12W3v3, or 12TW5 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 4-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• 4 Input Automatic Video Switcher
• Automatic left and right turn signal triggering
• Automatic backup to front camera switching
• Includes 4 camera inputs

• 500-Amp continuous / 700-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16.5V DC operating range

• 3.5" Pro Audio Bullet Tweeters
• 240 watts Peak Each
• 120 watts RMS Each
• 4 ohm Impedance

• Dual 1/0-gauge input and output to 1/0-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• 4 Gauge Solid Copper Ring Terminals
• Shrink Tubing
• Pure Copper with Nickel plating for optimal Current transfer
• Color: Black
• Count: 4

Stacking Hardware for Three Slash v2 Amplifiers
• Made With JL Audio High Quality
• Precision Machined
• Colored Black

• 20 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Trunk
• Pack includes five 18" x 32" sheets

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Makes noise even if thief disconnects main car battery
• Key on/off feature to allow manual override

• 0.77 cu ft Sealed Enclosure
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• JLid-communication and optical audio network hub
• Allows connection of multiple VXi Series amplifiers
• Connects to JLid-COMM port on VXi amps via Cat5 Ethernet cables
• Provides JLid-communication and optional S/PDIF

• 1.38 square feet sound deadening kit
• Solid black design for any stealth car audio installation
• Material Used: Vibration Dampener
• Material Thickness: 0.091
• Install Location: Speaker
• Pack includes two 10" x 10" sheets

• Universal Rear View Backup Camera
• Mounting Style: Full License Plate Frame
• Resolution: 720 x 480 
• Waterproof: Yes
• Nightvision: Infrared LED's

• 10" Amplified Loaded Subwoofer System
• 180 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Universal Parking Brake Bypass Module
• Designed for use in RVs, off-road, and exhibition vehicles
• Emulates a parking brake signal

• 12" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

• Smartphone remote start car alarm app
• Compatible with Android and iPhone devices
• Unlimited range (subject to service coverage area)
• Shareable with multiple users, with set expiration date
• Premium and Premium Plus service plans available

• 50 feet 18 gauge Remote Wire
• OFC (100% Oxygen-Free Copper) material
• Color: Blue

• For High-Powered systems
• Bright Blue LED Voltage Display
• Improves Bass Response (SPL)

• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Ground Loop Isolator
• Close to Perfect Response of +/- 0.03 dB From 2-20,000 Hz
• Utilizes Proprietary Audio Transformers for a 1.3 dB Gain
• Female 3.5mm Input
• Male 3.5mm Output

• Water-resistant RGB LED Controller
• Designed in tandem with RGB MPS app
• Select from 10 speeds and 20 modes
• Sync LED to your music via Smartphone Bluetooth feature
• Compatible with MPS-RGBWWS4 (Sold separately)

• Features Qualcomm Quick Charge 3.0
• Charges two devices simultaneously at 5V (2.1A)
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)

&bull Pair of Bass Blockers For 4" Speakers
• Blocks 0-1200 Hz @ 4 Ohm
• Blocks 0-600 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.51"
• Sensitivity: 84 dB

• Audio Sensor That Detects Attempts to Tamper with or Break Your Vehicle's Glass

• Compact standalone sound pressure meter
• Measures SPL, current, maximum, and minimum voltage
• Measures speaker tunes and subwoofers
• Attachable to car windshield

• Super Tweeter
• 100 watts RMS Each
• 8 ohm Impedance

• Designed to connect in-dash receiver wiring harness to vehicle wiring harness

• Controls Operation of 2 Vehicle Windows
• Automatically Rolls Up Power Windows when the Vehicle's Security System is Armed
• One Touch Operation
• Auxiliary Channel to Vent or Roll Down Windows Completely from the Security System

• Six Piece Installer's Removal Tool Kit
• Durable Nylon Plastic

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 800 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• CEA-2015 and BC5W2 Compliant

• Complete 0 Gauge Amplifier Installation Kit
• Designed for Systems up to 3600 Watts
• Includes Everything Needed for Installation
• Premium Power and Ground Cable