Universal-Fit Audio for 2003 Chrysler Concorde

---

• 100 watts x 4 channel @ 4 ohm
• 160 watts x 4 channel @ 2 ohm
• Bridged: 320 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Gauge Reducer Adapter
• 1/0 Gauge Input to 4 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• Dual 1/0-gauge input and output to 1/0-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• Dual Outlet Portable Power Inverter
• Surge Power Output: 600 watts
• Continuous Power Output: 300 watts
• USB port included for charging compatible devices
• Internal cooling fan keeps the inverter from overheating

• 3.5" Pro Audio Bullet Tweeters
• 240 watts Peak Each
• 120 watts RMS Each
• 4 ohm Impedance

• 300 AMP Circuit Breaker
• Input Gauge Size: 0 to 4 AWG
• Maximum Output Gauge: 4 AWG

• 300A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• 2-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• Audio Sensor That Detects Attempts to Tamper with or Break Your Vehicle's Glass

• Single Knob Surface Mount Housing Pod
• For use with Belva BAWLK, BA2USB or BAVTM

• 360 Degree Camera System
• Backup Camera Included
• DVR Records from All Four Cameras
• 3d Overhead View Available

• Single Door Lock Actuator
• Converts Manual Doorlocks Into Power Doorlocks
• Two-Wire Reverse Polarity Operation
• Universal Mounting Hardware Included

• Converts internal wireless FM transmitter to a wired FM modulator
• Connects audio output with POD with FM modulator to car radio
• Designed for use with Audiovox SIRCK3 and XC9 vehicle kits

• 3-way Passive Crossover Network
• Designed to expand a 2-way component system into a 3-way setup
• Ideal for adding a midrange driver to your 2-way component system
• Includes woofer, midrange and tweeter outputs
• Compatible with AudioControl PNW and Altitude Series speakers

• 200 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Easy reset/disconnect
• Can act as a master disconnect for circuits

• Single 12" Vented MDF Enclosure
• Holds one 12" subwoofer
• 3/4 MDF (Medium Density Fiberboard) Construction
• Durable black carpeting
• Gold Terminals
• Internal Box Volume: 1.8 cubic ft.

• Fully Active, 2-Channel Remote Level Control and Line Driver with Pass-Through Outputs
• Minimizes Unwanted Noise
• Active Circuitry
• Control Knob
• Pass-Through Connection

• 500 watts x 1 channel @ 4 ohm
• 850 watts x 1 channel @ 2 ohm
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Compatible for Sundown SA 12V2 subwoofers (Sold separately)

• 12" Grille made specifically for the JL Audio 12W1v2, 12W3v3, or 12TW5 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• Active 6-Channel Line Driver
• Increase pre-amp signal levels up to 9.5 volts RMS
• Matches the volume levels between different sources
• Two channels of input can drive all six outputs
• Each output can drive up to seven amplifiers

• Controls Operation of 2 Vehicle Windows
• Automatically Rolls Up Power Windows when the Vehicle's Security System is Armed
• One Touch Operation
• Auxiliary Channel to Vent or Roll Down Windows Completely from the Security System

• 7 Meters
• 12 Gauge Speaker Wire
• High Strand Count for Maximum Flexibility
• 23 Foot Length

• 1.38 square feet sound deadening kit
• Solid black design for any stealth car audio installation
• Material Used: Vibration Dampener
• Material Thickness: 0.091
• Install Location: Speaker
• Pack includes two 10" x 10" sheets

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• 0.77 cu ft Sealed Enclosure
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• High-polished stainless steel tower speaker swivel clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• For positive or negative battery post use
• Add a Post System
• >Solid brass construction

• Universal Antenna Extender • Extends Antenna 48" (4 ft.)

• 12" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

• Direct Power Smartcord for Escort Radar Detectors
• Blue LED Light Notifies You of Alerts
• Built-in Mute Button to Silence Audio Alerts
• Works with all current generation escort windshield mounted detectors

• 20 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Trunk
• Pack includes five 18" x 32" sheets

• For High-Powered systems
• Bright Blue LED Voltage Display
• Improves Bass Response (SPL)

• 200A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• Load Generating Device and Signal Stabilizers
• Designed for non-amplified Dodge, Chrysler, Jeep and Maserati sound systems
• Generates load and stabilize signal from a non-amplified factory system
• Operating Impedance: 20 ohms

• 10" Amplified Loaded Subwoofer System
• 180 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

&bull Pair of Bass Blockers For 4" Speakers
• Blocks 0-1200 Hz @ 4 Ohm
• Blocks 0-600 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts

• Ring Terminals
• 3/8" Opening
• 0/1 Gauge
• 3 Red & 2 Black • Nickel Plated
• Resealable Polybag

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 4-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

Stacking Hardware for Three Slash v2 Amplifiers
• Made With JL Audio High Quality
• Precision Machined
• Colored Black

• Ground Loop Isolator
• Close to Perfect Response of +/- 0.03 dB From 2-20,000 Hz
• Utilizes Proprietary Audio Transformers for a 1.3 dB Gain
• Female 3.5mm Input
• Male 3.5mm Output

• Super Tweeter
• 100 watts RMS Each
• 8 ohm Impedance

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Universal Vehicle Alarm/Remote Start Power Window Automation Kit
• Automatic Roll-up/down windows from your Alarm/Remote Start controller
• Can be used for sunroof
• Compatible with All Encore Remote Start and Security Systems
• Compatible with All Encore Remote Start and Security Systems

• 500-Amp continuous / 700-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16.5V DC operating range

• 2-Way Replacement Remote
• 5-Button Transmitter
• 1 Mile Range
• Color: Black

• Universal Rear View Backup Camera
• Mounting Style: Full License Plate Frame
• Resolution: 720 x 480 
• Waterproof: Yes
• Nightvision: Infrared LED's

• Spade Terminals • 8 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Six Piece Installer's Removal Tool Kit
• Durable Nylon Plastic

• Universal Round Chrome-plated Terminal Cup for Speaker & Subwoofer boxes
• Chrome-plated contacts for optimal signal transfer
• Screw binding posts for a tight secure connection
• Positive (Red) and negative (Black) indicators to ensure proper wiring
• Easy to install and use

• Water-resistant RGB LED Controller
• Designed in tandem with RGB MPS app
• Select from 10 speeds and 20 modes
• Sync LED to your music via Smartphone Bluetooth feature
• Compatible with MPS-RGBWWS4 (Sold separately)

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• JLid-communication and optical audio network hub
• Allows connection of multiple VXi Series amplifiers
• Connects to JLid-COMM port on VXi amps via Cat5 Ethernet cables
• Provides JLid-communication and optional S/PDIF

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.51"
• Sensitivity: 84 dB

• Gauge Reducer Adapter
• 4 Gauge Input to 8 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Chrome Plating

• Features Qualcomm Quick Charge 3.0
• Charges two devices simultaneously at 5V (2.1A)
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)