Universal-Fit Audio for 2009 Lexus LS600hL

---

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• 12" Mesh GrilleInsert
• Made Specifically for the 12w6v2.c3 12" W6 Subwoofer
• Made with Top-Notch JL Audio Quality
• No Screws or Extra Hardware Needed

• 1-Way Keyless Entry Car Alarm System
• 4-Button Transmitter
• 1/4 mile (1320 feet) range

• Marine-rated Y-connector

• 10.1" High-Resolution Digital LED Backlit Overhead Monitor
• Built-in DVD, USB and HDMI inputs
• Dual channel IR headphone transmitter with 2 headphones
• Display Type: TFT Active Matrix LCD
• Screen Resolution: 1024 x 600

• Door Lock Relay Module with Resistors DEI 451M
• Compatible with most Directed Electronics systems
• 3-Pin Plug Interface with DEI system
• Will interface with most electric power door lock systems drawing 30A or less

• 10-pack 4-gauge Heat Shrink
• Protect your cable crimp ends with style
• Color: Black

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• Universal Round Chrome-plated Terminal Cup for Speaker & Subwoofer boxes
• Chrome-plated contacts for optimal signal transfer
• Screw binding posts for a tight secure connection
• Positive (Red) and negative (Black) indicators to ensure proper wiring
• Easy to install and use

• Split Loom Tubing
• Diameter: 1/8"
• Length: 100 Ft
• Material Type: Polyethylene
• Exterior Finish: Smooth
• Color: Black

• 8-way RGB LED Underbody Light Kit
• IP65 water-resistant rating
• Bright CREE light pods
• Controllable LED colors and patterns via Android or iOS app

• 300A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• BassPro Go Vehicle Installation Kit
• Designed for installing a JBL BassPro Go powered subwoofer in another vehicle
• Vehicle mounting bracket, hardware and harnesses included

• Universal Antenna Extender • Extends Antenna 48" (4 ft.)

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

• Ported enclosure with 2 12" Solo-Baric L7R Series Subwoofer
• 1200 watts RMS (2400 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 15-7/8" H x 15-1/4" W x 20-3/8" W2

• Use to connect multiple MediaMaster Remote Controllers
• 2-way Y-splitter

• Slider mounting bracket for Stealth HD and XT soundbars
• CNC'd from billet aluminum for extra durability
• Allows adjusting of soundbar mounting width
• Includes brackets, bolts, lock-washers, and flat-washers (2 each)

• Wired Remote Control
• Designed for Marine Environments
• Compatible with Kenwood Marine & In-Dash Head Units
• Includes Mounting Hardware

• Features easy-to-read 2-3/4" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 36 in. 18 gauge CCA test leads

• Super Tweeter
• 100 watts RMS Each
• 8 ohm Impedance

• Wired Bass Remote Controller
• Compatible with select JL Audio HD, MHD and XDM amplifiers
• Flush-mountable installation
• Color: Black

• Complete 0 Gauge Amplifier Installation Kit
• Designed for Systems up to 3600 Watts
• Includes Everything Needed for Installation
• Premium Power and Ground Cable

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 1-Way Remote Car Starter
• 5-Button LED Transmitter
• 1500 feet of range (0.28 miles)
• Dual 2-way data port
• Multi-vehicle functionality

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 3-3/4"
• Sensitivity: 85.5 dB

• 1" diaphragm for all Pro Mobile tweeters
• Applicable for models: P1T, P175T, P1SRT
• Does not fit Cerwin Vega P75T and P5T tweeters
• East to install, no cutting or drilling required
• Improves high‑frequency performance

• 500-amp Relay and Battery Isolator
• High current isolation relay designed for adding a secondary battery
• Prevents primary battery discharge when the vehicle engine is off
• Maximum Contact Rating: 500 amps
• Mechanical Life Cycle: 100000

• 2-Way Paging Remote Car Starter
• 5-Button LCD Transmitter
• 3000 feet of range (0.56 miles)
• Full high speed 2-way data to data

• 4-Channel SwitchHub Solid-State Relay
• Single 40-amp output and triple 20-amp outputs
• 100-amp combined continuous capacity
• Outputs can be triggered independently

• Peak Power: 2400 watts
• RMS Power: 1200 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 7.02"
• Sensitivity: 85 dB (1W/1m)

• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in

• 20 feet 8 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Specifically developed for Hertz MP 70.3 and Hertz MP25.3
• Two-position (0 / +2 dB) switch for tweeter level adjustments
• Pure copper wire low series resistance inductors

• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• 490 watts x 1 channel @ 4 ohm
• 780 watts x 1 channel @ 2 ohm
• 1300 watts x 1 channel @ 1 ohm
• Total RMS Power: 1300 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Spade Terminals • 8 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• 8" Amplified Loaded Subwoofer System
• 120 watts RMS (360 watts Peak)
• Built-In amplifier
• Variable bass boost
• Speaker-Level Inputs
• EBC wired remote bass level control

• Multi-Band Radar and Laser Detection
• Graphic Color OLED display with current speed, vehicle voltage, and alert area monitors
• User, pilot, arrow and meter modes
• Directional arrows provide true 360-degree awareness
• Installs on the windshield

• Works with power wire 8 gauge to 1/0 gauge
• Great for positive or negative connections to your battery
• Forged and machined 360 brass connection
• Elements and set screws have marine-grade, anti-corrosive Stannum plating

• Wired Bass/Treble Remote for select 2007-2025 Punch and Power amplifiers
• Controls bass on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox

• Dual 1/0-gauge input and output to 1/0-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• True Spec 16 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Twisted-pair technology eliminates noise

• OEM Alarm Shock Sensor Upgrade Kit
• Allows factory alarm systems to detect impacts to the vehicle
• Designed to interface for factory alarms extra sensor input

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Black

• 10" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .65 cubic feet
• Premium Black Carpet with Black NVX Logo

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 800 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• CEA-2015 and BC5W2 Compliant

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 7.4"
• Sensitivity: 87.50 dB

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• 12-volt Absorbent Glass Mat (AGM) Car Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 4000W audio stereo systems
• Compatible with many Domestic and Japanese vehicles

• 4 Gauge Solid Copper Ring Terminals
• Shrink Tubing
• Pure Copper with Nickel plating for optimal Current transfer
• Color: Black
• Count: 4

• 75 Amp Power Supply
• Built-In 4 Stage Smart Charger
• Overtemp Protection
• Deck Mounted Converter
• Max Output: 1065 Watts