Universal-Fit Audio for 2015 Mazda 3

---

• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.25"
• Sensitivity: 80.49 dB

• 2-Way Keyless Entry Car Alarm with Remote Start Control
• 4-Button LED Transmitter with Digital Display
• Up to 3000 ft Range
• Multi-Vehicle Support

• 1” Aluminum Pro Audio Marine Horn Tweeter Kit
• 800 watts Peak Each
• 200 watts RMS Each
• 4 ohm Impedance

• MANL 4 Position Distribution Block
• Small Footprint
• 1) 1/0 AWG Input
• (4) 4/8 AWG outputs

• CAN-BUS Multi Doorlock & Transponder Interface Compatible with Select 2000-2009 Vehicles
• XPRESSKIT Canbus Door Lock, Alarm & Immobilizer By-Pass

• 20 Ft. Of 12 AWG Q-Series Speaker Wire
• Direct-Connect Engineering
• Twisted-Pair Technology
• Full Spec Wire True to Gauge
• Hyper-Flex Technolog

• Split center pin for secure connection
• Great sound transfer
• OFC (Oxygen Free Copper) for corrosion resistance
• Platinum plated ends for corrosion resistance
• RFI and EMI noise rejection
• Frosted outer sheild for durability and flexibility

• 4-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 1-Way Keyless Entry Car Alarm
• 4-button transmitter
• 1320 ft. range
• Valet switch and LED

• Side/Top Mount Replacement Antenna for 1" Hole Split Ball Applications
• 14" Removable Conductive Rubber Mast
• Mast Color: Black

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Reinforced Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 3.82"
• Sensitivity: 88 dB

• 70 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 1" Titanium Compression Bullet Tweeters
• 100 watts Peak Each
• 50 watts RMS Each
• 4 ohm Impedance

• 75 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 100 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• 4 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Bridged (Strapped): 3000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 1/4" split-braid sleeving
• Protects wires, cables, hoses and more
• Great for automotive, marine or office applications
• 200 feet of tubing included
• Resists cuts and other abrasions

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Premium plush black carpet finish
• Premium graphic patterns
• Signature miter and dado construction
• Bonded using proprietary trick glue
• Total box volume: 3 cubic feet

• 6.5" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 0.30 cubic feet
• Compatible for Sundown SA65V2 and similar subwoofers (Sold separately)

• 12/10 Gauge Heat Shrink Connectors
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 12/10
• Color: Yellow
• Count: 100

• Replacement LED headlight bulbs
• 3.1"
• Heat sink 1.26 inch

• Universal 3/8" trim ring
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• 1500 watts x 1 channel @ 4 ohm
• 2500 watts x 1 channel @ 2 ohm
• Total RMS Power: 2500 watts
• Class BD 1 ohm Stable Monoblock Amplifier

• 12" Single Sealed Shallow Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Ultra slim and shallow enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.62 cubic feet

• 10" LED acrylic ring and LED strip for Wet Sounds marine speakers
• CNC-machined high-quality acrylic rings
• SMD 5050 RGB LED strips
• Compatible with Wet Sounds REV10 and REV410 marine tower speakers (Sold separately)

• Handlebar Mount Hardware and Accessories for NVX XUBT3 Controller
• NVX XUBT3 Controller Sold Separately
• Fits Most Handlebars Up To 1" Diameter
• Perfect for Motorcycles, bikes and ATVs

• 6" Amplified Loaded Subwoofer System
• 120 watts RMS
• Built-In Class D Amplifier
• Speaker-Level Inputs
• RCBM-250D remote control sold separately

• 8" Dual Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .80 cubic feet
• Premium Black Carpet with Black NVX Logo

• 150 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit

• 750 watts x 1 channel @ 4 ohm
• 750 watts x 1 channel @ 2 ohm
• Total RMS Power: 750 watts
• Class D 1.5 ohm Stable Monoblock Amplifier

&bull Tone Generator • Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper
• Auto Shutoff

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• 800 watts x 1 channel @ 1 ohm
• Total RMS Power: 800 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 500 watts
• RMS Power: 250 watts
• Fiber-Reinforced High Strength Paper Cone
• Impedance: Dual 4 ohm
• Sensitivity: 82.1 dB

• Peak Power: 300 watts
• RMS Power: 150 watts
• Impedance: Dual 4 ohm
• UV-Resistant Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 2-3/4"
• Sensitivity: 82.6 dB

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 12" Truck/Wedge Powered Subwoofer
• Rockford Fosgate Sealed Enclosure
• 300 Watt RMS Class-D Mono Block
• Bass Remote Included
• Low And High level Inputs

• 5 Meters
• 2 Channel RCA
• Audio Interconnect Cable
• 16.4 Foot Length

• Peak Power: 7000 watts
• RMS Power: 3500 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• Mega Roll V2 Surround
• Sensitivity: 83.15 dB

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Swivel mount clamp for ETXv3 tower speakers
• Designed to fit tower speakers or roll bars
• Sold as pair (2 swivel mount clamps)
• Inner clamp diameter: 2" (50.8mm)

• 70 watts x 4 channel + 225 watts x 1 channel @ 4 ohm
• 100 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Fits most aftermarket 6.5" speakers into 4" factory openings
• Compatible with 2018-2023 vehicles from Jeep
• Constructed of injection-molded plastic
• Includes all necessary hardware
• Sold as a pair

• Universal Steering Wheel Control Interface
• Plug and Play installation
• Provides Conguration Information for Dip Switch or Direct Flash from PC APP

• Multi-Stage Charging
• Output Display
• Internal Cooling Fan
• Voltage Monitoring

• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 1-Channel Line Out Converter
• Designed to integrate with aftermarket or factory OEM systems
• Maximum Input: 45 watts

• 100 watts x 4 channel + 500 watts x 1 channel @ 4 ohm
• 75 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• 700 watts x 1 channel @ 1 ohm (subwoofer output)
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 1.5 ohm Stable 5-Channel Amplifier

• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• Rubber Surround
• Mount depth: 4.76"
• Sensitivity: 83 dB

• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 2 ohm
• Mount depth: 5.19"
• Sensitivity: 85 dB