Universal-Fit Audio for 1992 Hyundai Excel

---

Universal Round Chrome-plated Terminal Cup for Speaker / Subwoofer Boxes
• Chrome-Plated Contacts
• Screw Binding Posts
• Easy to Install and Use

• 420 watts x 2 channel @ 4 ohm
• 630 watts x 2 channel @ 2 ohm
• Bridged: 1260 watts x 1 channel @ 4 ohm
• Total RMS Power: 1260 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Compatible for Sundown SA 12V2 subwoofers (Sold separately)

• Six Piece Installer's Removal Tool Kit
• Durable Nylon Plastic

• Audio Sensor That Detects Attempts to Tamper with or Break Your Vehicle's Glass

• 3.5" Pro Audio Bullet Tweeters
• 240 watts Peak Each
• 120 watts RMS Each
• 4 ohm Impedance

• Fully Active, 2-Channel Remote Level Control and Line Driver with Pass-Through Outputs
• Minimizes Unwanted Noise
• Active Circuitry
• Control Knob
• Pass-Through Connection

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.51"
• Sensitivity: 84 dB

• Composite RCA to direct camera adaptor
• Compatible with all Alpine stereos with direct camera input
• Ideal for adding any aftermarket camera
• Plug and play, no cutting or splicing required

• Drive Smarter app compatible
• Preloaded database of red-light and radar cameras
• Built-in GPS
• Works Apple CarPlay and Android Auto
• Next Gen Antenna platform
• Dual Core Processor
• Escort Smart Cord USB Included

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 8.3 Megapixel Recording (front cam)
• 3.7 Megapixel Recording (rear cam)
• 3.0" LCD Display (front cam only)
• Integrated GPS system
• Touch panel control

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• For positive or negative battery post use
• Add a Post System
• >Solid brass construction

• Prevents Wire Splitting when using Setscrew Terminals
• Fits 1/0 Gauge AWG Wire
• Includes (4) 0 Gauge Ferrules and (4) Heat Shrink

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D amplifier
• Variable bass boost
• Speaker-level inputs

• 200 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Easy reset/disconnect
• Can act as a master disconnect for circuits

• Wired Remote Control
• Designed for Marine Environments
• Compatible with Kenwood Marine & In-Dash Head Units
• Includes Mounting Hardware

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 5/6-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

• 0.77 cu ft Sealed Enclosure
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• 500-amp Relay and Battery Isolator
• High current isolation relay designed for adding a secondary battery
• Prevents primary battery discharge when the vehicle engine is off
• Maximum Contact Rating: 500 amps
• Mechanical Life Cycle: 100000

• Wired Bass Remote Controller
• Compatible with select JL Audio HD, MHD and XDM amplifiers
• Flush-mountable installation
• Color: Black

• Marine Remote Control Extension Cable
• Compatible with select Kenwood Receivers
• Black
• 10 Foot Length

• Stinger Select Circuit Breaker
• Power Rating: 250 Amps
• Push Button Reset
• Water Resistant Housing
• Integrated Holes for Simple Mounting
• Compact and Lightweight Design

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 3-3/4"
• Sensitivity: 85.5 dB

• Portable Automatic Smart Lithium Standard Voltage Maintainer
• Lithium Lifepo4 Battery Maintainer 3.5 Amp
• Designed for charging 12 volts batteries
• Shuts off when the battery is charged
• Can be used as a "Maintainer" for all lifepo4 batteries

• Ported enclosure with 2 12" Solo-Baric L7R Series Subwoofer
• 1200 watts RMS (2400 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 15-7/8" H x 15-1/4" W x 20-3/8" W2

• Converts differential video signal to a single-ended composite video signal
• Improves display of OE camera on the aftermarket radio
• Reduces/eliminates video noise
• Two-wire power connection for simple installation
• Great for Ford and Chrysler vehicles and many more

• Brass Construction
• 4 GA to 8 GA
• Nickel Plated Finish
• Large Set Screws

• 10" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .65 cubic feet
• Premium Black Carpet with Black NVX Logo

• Multi-Video Amplifier
• Includes one RCA input and four RCA outputs
• Video level control for each level

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• Works with most 5 1/4", 6 1/2" and 6 3/4" speakers
• Gives 1 inch extra depth

• 12" Subwoofer Grille for Rockford Fosgate P2,P3, and P3 Shallow
• Black Gloss Finish
• Mesh Design for Maximum Protection

• 1.38 square feet sound deadening kit
• Solid black design for any stealth car audio installation
• Material Used: Vibration Dampener
• Material Thickness: 0.091
• Install Location: Speaker
• Pack includes two 10" x 10" sheets

• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in