Universal-Fit Audio for 2001 Kia Sephia

---

• 4 Gauge Firewall Grommet
• IP68 Waterproof Rating
• Protects Cables When Installing Through a FIrewall
• Sold Individually

• 12" Grille made specifically for the JL Audio 12W1v2, 12W3v3, or 12TW5 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 600 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• Complies to American Wire Gauge standards

• Universal Roll-Cage Soundbar Mounting Clamps
• Designed for use in SoundExtreme soundbars (Sold separately)
• Fits in 1.5" to 3" mounting tubes
• Sold in pairs

• 6" x 9" Universal Speaker Spacers / Depth Extenders
• Adds 1-1/2" depth to speakers
• Items that make the installer's Life easier
• Trimrings and Trimplates
• Speaker Grills
• Speaker Adapter plates

• Ring Terminals
• 3/8" Opening
• 0/1 Gauge
• 3 Red & 2 Black • Nickel Plated
• Resealable Polybag

• 100 watts x 4 channel @ 4 ohm
• 160 watts x 4 channel @ 2 ohm
• Bridged: 320 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• For positive or negative battery post use
• Add a Post System
• >Solid brass construction

• Audio Sensor That Detects Attempts to Tamper with or Break Your Vehicle's Glass

• Empty Single 6x9" Speaker Enclosures
• Medium Density Fiberboard (MDF) construction with charcoal carpet finish
• Front-loaded enclosure design suitable for trucks
• Integrated terminals for easy installation and removal

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 500-Amp continuous / 700-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16.5V DC operating range

• Makes noise even if thief disconnects main car battery
• Key on/off feature to allow manual override

• Fully Active, 2-Channel Remote Level Control and Line Driver with Pass-Through Outputs
• Minimizes Unwanted Noise
• Active Circuitry
• Control Knob
• Pass-Through Connection

• 1" titanium replacement diaphragm for NVX VPRO35TW tweeters
• Restores clear, high-frequency sound
• Replaces damaged or worn components
• Quick and easy installation

• Front Load Flush Mount Flange
• For use with Belva BAWLk, BA2USB or BAVTM
• Color: Black
• Material: Plastic

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 5/6-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Black

• 1" Replacement Diaphragm for Tweeters
• Compatible with most 1" tweeters
• Not compatible with M075T or M075T2 models
• Impedance: 2-ohm

• For High-Powered systems
• Bright Blue LED Voltage Display
• Improves Bass Response (SPL)

• Ground Loop Isolator
• Close to Perfect Response of +/- 0.03 dB From 2-20,000 Hz
• Utilizes Proprietary Audio Transformers for a 1.3 dB Gain
• Female 3.5mm Input
• Male 3.5mm Output

• Universal 1/2" Speaker Spacers
• Fits 6" x 9" Speakers
• OEM Automotive Grade ABS Plastic Construction
• Color: Black

• 12" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

HPM Series Power or Ground Distribution Block • One 1/0 Gauge or 4 Gauge Input • Two 4/8 Gauge Outputs • Protective Cover Included • Corrosion Resistant Satin Chrome Finish

• Multi-Video Amplifier
• Includes one RCA input and four RCA outputs
• Video level control for each level

• High-polished stainless steel tower speaker swivel clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• 20 square feet sound deadening kit
• Material Used: Vibration Dampener
• Material Thickness: 0.091 (2.3 mm)
• Install Location: Trunk
• Pack includes five 18" x 32" sheets

• Universal Round Chrome-plated Terminal Cup for Speaker & Subwoofer boxes
• Chrome-plated contacts for optimal signal transfer
• Screw binding posts for a tight secure connection
• Positive (Red) and negative (Black) indicators to ensure proper wiring
• Easy to install and use

• 300 AMP Circuit Breaker
• Input Gauge Size: 0 to 4 AWG
• Maximum Output Gauge: 4 AWG

• 150A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

&bull Pair of Bass Blockers for 6" x 9" Speakers
• Blocks 0-300Hz @ 4 Ohm
• Blocks 0-150Hz @ 8 Ohm
• Filters Out Unwanted Frequencies Towards Speakers

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.51"
• Sensitivity: 84 dB

• Double-DIN Dash Kit
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• Direct Power Smartcord for Escort Radar Detectors
• Blue LED Light Notifies You of Alerts
• Built-in Mute Button to Silence Audio Alerts
• Works with all current generation escort windshield mounted detectors

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• Works with your JL Audio LED speakers
• Control lighting colors and the intensity of your lighting
• Compact system can be installed in almost any application
• Built-in over-current and short-circuit protection
• Built-in voltage and temperature monitoring

• 0.77 cu ft Sealed Enclosure
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Compatible for Sundown SA 12V2 subwoofers (Sold separately)

• Controls Operation of 2 Vehicle Windows
• Automatically Rolls Up Power Windows when the Vehicle's Security System is Armed
• One Touch Operation
• Auxiliary Channel to Vent or Roll Down Windows Completely from the Security System

• BassPro Go Vehicle Installation Kit
• Designed for installing a JBL BassPro Go powered subwoofer in another vehicle
• Vehicle mounting bracket, hardware and harnesses included

• 200 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Easy reset/disconnect
• Can act as a master disconnect for circuits

• Universal spacers for car speakers
• Includes 2 spacers (screws not included)
• Compatible Speaker Size: 6.5"
• Spacer Thickness: 0.5"

• Super Tweeter
• 100 watts RMS Each
• 8 ohm Impedance

• 500 watts x 1 channel @ 4 ohm
• 850 watts x 1 channel @ 2 ohm
• 1200 watts x 1 channel @ 1 ohm
• Total RMS Power: 1200 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Wired bass remote controller for Kicker CX series amplifiers
• Works with DX or PX series amplifiers with remote bass jack
• Includes 19.5 ft. cable and mounting accessories

• 10" Amplified Loaded Subwoofer System
• 180 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 10" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• Universal Rear View Backup Camera
• Mounting Style: Full License Plate Frame
• Resolution: 720 x 480 
• Waterproof: Yes
• Nightvision: Infrared LED's

• Prevents Primary Battery Discharge
• Maximum Current Transfer
• Ideal for 2nd Audio Battery Isolation from Vehicle Systems
• 500A Constant/ 900A Peak

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• Active 6-Channel Line Driver
• Increase pre-amp signal levels up to 9.5 volts RMS
• Matches the volume levels between different sources
• Two channels of input can drive all six outputs
• Each output can drive up to seven amplifiers

• 12" Cast Aluminum Subwoofer Grille
• Enhances the Look of your 08 Series Kicker Solo-Baric Subwoofers
• Protects the Sub from Damage
• Gives your Woofer an Attractive Look

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D amplifier
• Variable bass boost
• Speaker-level inputs

• 20 feet 8 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 200A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• 12" Subwoofer Grille for Rockford Fosgate P2,P3, and P3 Shallow
• Black Gloss Finish
• Mesh Design for Maximum Protection

• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment