NVX VAD10004 1000W RMS Full Range Class D 4-Channel Car/Marine/

NVX VAD10004

1000W RMS Full Range Class D 4-Channel Car/Marine/Powersports Amplifier

In Stock
|

List price $349.99

You Save: $110.00 (31.43%)

Thanks , You Pay:

$239.99

with warranty

Order within 68 hrs 33 mins to ship 7/22

Qualifies for free 2-day shipping

Add an Extended Warranty

SquareTrade Product Warranty
60-Day Money-Back

Hassle Free Returns

365-Day Coverage

Warranty assistance for a year

Bundles with this Product

Add a 100% Copper, True 4 Gauge Amp Kit and save 50%

Purchase a qualifying amplifier and save 50% on an NVX XKIT44 True Gauge OFC amplifier installation kit. Simply click the "Add Both to Cart" button. This offer cannot be combined with any other coupons or offers.

50.00

158917

1909

NVX VAD10004

$239.99

+

50% OFF

NVX XKIT44

$99.99

Special Price $49.99 ($99.99 if purchased separately)

NVX XKIT44

• 4 Gauge 4-Channel X-Series Complete Amplifier Installation Kit
• For Car Audio Systems Up To 1000 Watts RMS
• Silver-Tinned 100% Virgin Copper
• 4-channel RCA Interconnect Cable

FREE 4 Gauge Amp Kit with Purchase!

You will need an amp kit to install your amp, and the Belva BAK44 is the perfect kit for this amp. For a limited time, when you click "Add Both to Cart", you'll receive a free amp kit with your purchase. This offer cannot be combined with any other coupons or offers.

34.99

158917

2739

NVX VAD10004

$239.99

+

100% OFF

Belva BAK44

$34.99

Special Price $0 ($34.99 if purchased separately)

Belva BAK44

• Complete 4 Gauge 4-Channel Amplifier Installation Kit
• Designed Specifically For Car Audio Systems Up to 1000 Watts RMS
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 30% Copper CCA Wire

(Offer 1 of 2)

Combined Total Price

$289.98

You Save $50.00

NVX Store

Incredibly Compact & Powerful:

The VAD10004

Don't let the compact size of this amplifier fool you. It offers a total RMS power of 1000 watts. Therefore, you can install it in any location in your vehicle and get a high enough output to power your professional sound quality equipment.


Water & Weather Resistant

The VAD Line of amplifiers include a conformally coated, marine grade circuit board. This allows this amplifier to be installed in nearly any application. They are great for any car, motorcycle, ATV, UTV, or boat.


  • Marine Certified Full Range Class D 4-Channel Amplifier
  • CEA-2006 Compliant
  • Peak Power Rating: 2000 Watts
  • RMS Power Rating:
    • 4 ohms: 150 watts x 4 chan.
    • 2 ohms: 250 watts x 4 chan.
    • Bridged, 4 ohms: 500 x 2 chan.
  • LED power (blue) and protect (red) indicators
  • Conformal Coated Marine grade circuit board
  • Heavy duty aluminum alloy heat-sink
  • Platinum-plated RCA level inputs
  • Platinum-plated screw terminals
  • Preamp RCA outputs to daisy chain multiple amps
  • 2 or 4 channel operation
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Selectable crossover modes: FULL / HPF / LPF
  • Variable high-pass filter: 40 - 500 Hz, 12 dB/octave
  • Variable low-pass filter: 40 - 500 Hz, 12 dB/octave
  • Frequency Range : 20 - 20KHz
  • Input Sensitivity: 200mV-6V
  • Total Harmonic Distortion: <0.3%
  • Fuse Rating: 30A x 3
  • Power Wire Gauge: 4 AWG
  • Speaker Wire Gauge: 8 AWG
  • Dimensions: 11.2"L x 7.2"W x 2.0"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Product History:

NVX VAD10004 thumbnail
(newest, current model)
NVX JAD800.4 thumbnail
(previous model, replaced by NVX VAD10004)

Power Specifications - Full Range Channels

RMS Power @ 4 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 4 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

150 watts x 4 channels
RMS Power @ 2 ohms

The RMS power rating is the measure of continuous power that an amplifier can output, or a speaker can handle. It is the most accurate depiction of real, continuous power that the industry has so far.

If the final impedance of your speakers or subwoofers equals 2 ohms, this is how much power this amplifier will supply at that ohm level. The higher the RMS wattage, the more clean and loud your music will sound.

250 watts x 4 channels
Bridged RMS Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the RMS power created once an amplifier is bridged.

500 watts x 2 channels

Power Specifications - Full Range Channels

Peak Power @ 4 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

300 watts x 4 channels
Peak Power @ 2 ohms
This form of power rating refers to the maximum amount of power an electronic device can handle or output in an instant without damage occurring. Often times this maximum is achieved during a brief musical burst, such as a drum accent, or low bass hit.

Some manufacturers display peak power ratings on the face of their products to increase the appeal to consumers. The RMS power rating is more accurate, and we recommend using it for product comparison. However, some manufacture's do not provide an RMS figure and therefore one cannot be advertised.

500 watts x 4 channels
Bridged Peak/Max Power

Bridging refers to combining two channels on an amplifier to create one channel with double the voltage and an increased power output. A 2-channel amplifier will bridge down to 1-channel and a 4-channel amplifier can bridge to create 2-channels. An amplifier is most commonly bridged to drive a subwoofer.

Remember, once you bridge two channels down to one its final impedance will be 4 ohms unless otherwise specified. This rating lists the Peak/Max power created once an amplifier is bridged.

1000 watts x 2 channels

Amplifier Specifications

Amplifier Series
This designates the series of the amplifier. Many amps are available in a litany of different wattage and channel configurations, but maintain consistent features throughout the product line.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.

D
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
4
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.

2000 watts
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.

1000 watts
Maximum Input Gauge Size
This is the largest gauge wire that will fit into the power and ground terminals of this device. The lower the gauge number, the thicker the wire is. For example, a 4 gauge wire is thicker than an 8 gauge wire and thus has higher current carrying capacity. Always do your best to get this size wire to reduce the risk of damage to your components.
4 AWG
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
2 ohms
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
4 ohms
THD at Rated RMS Power
The amount of change in harmonic content of the signal as it is amplified. A lower figure indicates less change and a more accurate amp. THD below 0.10% is inaudible.
0.3%
Speaker Level Inputs
Speaker level inputs are commonly referred to as high-level inputs and vice versa. This input type allows you to get your audio signal directly from the speaker wire in your vehicle, instead of using RCA cables. The advantage of this is factory integration, as most stock radios do not have RCA outputs to run amplifiers.
No
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
1 pair
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
The high-pass crossover frequency can be a fixed crossover point or a variable crossover range. A variable high-pass crossover allows you to select a specific crossover point which allows frequencies above the set crossover point to pass, while making frequencies below the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 500 Hz
Low-Pass Crossover Frequency
The low-pass crossover frequency is typically used for subwoofers. It can be a fixed crossover point or a variable crossover range. A variable low-pass crossover allows you to select a specific crossover point which allows frequencies below the set crossover point to pass, while making frequencies above the set point gently or harshly roll-off, depending on the steepness of the slope.

The steepness of the roll-off slope is measured in dB/octave and refers to the rate of attenuation (lowering of volume) outside their pass bands.

40 - 500 Hz
Signal-to-Noise Ratio
This spec compares the strength of the signal to the level of background noise. A higher value indicates less background noise.
105 dB
Fuse Rating
The amperage and the number of fuse(s) an amp requires.
30A x 3 
Strappable
Some amplifiers can be "strapped" together in order to increase the output of a single audio channel. These amplifiers feature RCA preamp outputs, allowing you to pass the signal directly from one amp to the other to ensure consistency.
CEA-2006 Compliant
Amplifiers that have been tested to meet specific standards. When a car amplifier meets these standards, you can be sure that it will be able to produce the amount of power specified by the official CEA-2006 rating. Usually, these rating consist of the following items:
  • RMS Power
  • Signal-to-Noise Ratio

This rating applies to both external car amplifiers, as well as the amplifiers inside of in-dash stereos.

Yes
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Yes
Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
No
Hi-Res Certified
This feature refers to if the product is capable of Hi-Res Audio (HRA) playback.
No

Authorized Dealer

Authorized Dealer
We're an Authorized Dealer for nearly all the brands and manufacturers we sell. In the rare occasion we are not authorized, we guarantee that the product comes from an Authorized dealer or distributor. As such, we will always assist you even past the return policy to assure you the entire manufacturer warranty is covered in the event you have encounter a manufacturer defect.
Authorized Dealer

Specials with this Item

Promotions
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
VIP Guarantee

Warranty and Return Policy

Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Summary of Customer Ratings & Reviews

Rating Distribution

5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Average Attribution Rating

Durability
5.0
Value
5.0
Features
5.0
Design
5.0
Usability
5.0

Henderson, NV

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Small and Powerful

July 1, 2019

This AMP is amazing!!!! I am running 2 Polk Audio MM692 - MM1 Series 6x9" Coaxial Speakers, and 2 JBL 6 x 9's, and this AMP kills them.. After watching the video prior to purchasing, I bet these are more than 125 WATT RMS per channel.. All I know is this thing kicks butt. The system in my boat never sounded better.

0 of 0 found this helpful

Was this review helpful to you?

Tyrone, PA

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Amazing

June 11, 2019

I wouldn't trade this amp for the world. I'm running 2 sets of components on the front channels and 2 sets of coaxial on the rear channels. It is insanely loud and clear. After about an hour of heavy use, it will get slightly warm since I'm running it on 2 ohms per channel. But it never gets hot. Not even close. It's very efficient and very powerful. Best 4 channel amp I've ever owned.

0 of 0 found this helpful

Was this review helpful to you?

Wilmington, CA

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Great

May 16, 2019

Great product. I replaced my PDX Alpine amp for this one to put on My Harley. And Im shocked with how this amp performs verse my Alpine PDX

0 of 0 found this helpful

Was this review helpful to you?

novi, MI

Verified Purchase
Overall
Durability
Value
Features
Design
Usability
Awesome!!!

March 30, 2019

Ordered this amp along with the Vad 2700.1 very nice sleek looking amps nicelty built and good terminals. i am very happy with the sounds from this 4 channel it it running nvx components and they sound awesome this amp is a good choice!!!

0 of 0 found this helpful

Was this review helpful to you?

Cleveland, OH

Overall
Durability
Value
Features
Design
Usability
Plenty-o-power

February 14, 2019

This thing as powered my alpine door speakers for a few weeks now and let me tell you the power and clarity is beyond anything!

0 of 0 found this helpful

Was this review helpful to you?

Accessory Tools and Products

Accessories added

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $34.99

NVX XKIT44 4-Gauge 4-Channel Wiring Kit

4-Channel 100% OFC Complete True 4 Gauge Amp Kit with RCA Cables and Speaker Wire

Your Price $99.99

NVX XFLOC4

4-Channel Line Output Converter with Digital Noise Filter + Line Driver

Your Price $17.99

PAC LP7-4

L.O.C. PRO Series 4-Channel Line Output Converter with Remote Turn On

Your Price $25.99

AudioControl LC6i (Black)

6 Channel Line Out Converter with Internal Summing & 5-year warranty*!

Your Price $149.99

NVX XIV45 4-Channel RCA Audio Interconnect Cable

5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $19.99

NVX V-Series RCA Interconnect Cable

19 ft. of 4-Channel RCA cable with dual twisted-pair conductors

Your Price $21.99

NVX XIX45 X-Series RCA Interconnect Cable

16.4 ft. of 4-Channel X-Series RCA Cable with Dual Twisted Pair Hyper-Flex Technology

Your Price $34.99

Belva BBSW127 12 AWG Speaker Wire

12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA)

Your Price $14.99

Belva BBG3KT CCA 1/0 Gauge Big Three Kit

Features everything needed to upgrade factory power and ground wire.

Your Price $34.99

240 Amp S Series Alternator for Select 1992-2003 Dodge/Jeep Vehicles

240 Amp cutting edge 6 phase hairpin epoxy reinforced stator technology

Your Price $399.00

250 Amp Alternator for Select 2003-2008 Ford/Lincoln/Mercury Vehicles

Cutting edge 6 phase hairpin stator technology with Twin internal rectifier plates with finned heat sink

Your Price $399.99

240 Amp S Series Alternator for Select 1999-2006 Jeep Vehicles

6 phase alternators use less horsepower per Kilowatt than conventional 3 phase alternators

Your Price $399.00

240 Amp S Series Alternator for 2011 Toyota Corolla

Ultra precision balanced rotor with oversized charge post ensure sturdy cable connections

Your Price $399.99

240 Amp S Series Alternator for 2006-2011 Honda Civic

15% more efficient than typical alternators

Your Price $549.99

370 Amp E Series Alternator with Black Finish for Select 1994 - 2003 GM

WOW 370 AMPS! Elite series offers the highest possible amperage

Your Price $699.00

Kinetik HC1200-BLU

Kinetik BLU Series 1200 Watt 12V High Current AGM Car Audio Power Cell - Battery

Your Price $109.99

Stinger SPP680

680 Amp SPP Series Dry Cell Battery with Protective Steel Case

Your Price $199.99

Belva BB1D

1.0 Farad Capacitor with Digital Red Display for up to 1000W Max

Your Price $24.99

NVX XTGSP2

Perfect for safely troubleshooting and testing audio systems

Your Price $19.99

SMD DD-1 Distortion Detector

Set your gains like a Pro, accurately and quickly

Your Price $149.95

SMD CC-1 Crossover Calibrator

This is a must have! Set your crossover frequency like a Pro

Your Price $148.99

8 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $2.49

4 Gauge Ring Terminals, 5/16" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $5.99

0/1 Gauge Ring Terminals, 3/8" Opening

Nickel Plated Brass - 5 Pieces (3 Red & 2 Black)

Your Price $9.99

PRO Series Classic Short GM Battery Post Shoc-Krome

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $6.99

PRO Series Classic Long GM Battery Post w/ Shoc-Krome Plating

Side post battery adapter for GM type batteries (Positive or Negative)

Your Price $5.99

200 Amp Relay Isolator (BIR200)

Great for isolating a second batter making it dedicated to the stereo system

Your Price $44.99

120 Amp 4-Post Battery Isolator

Prevents primary battery discharge and extends battery life

Your Price $62.99

World's Smallest AFS / Mini ANL Fuse Holder

Accepts 4 gauge or 8-gauge wire

Your Price $12.99

ANL/Mini-ANL Fuse Holder with 1/0 or 4 Gauge Input and Output

No-fail termination and current flow, it helps keep your system protected and running smoothly

Your Price $19.99

4 Pack of 80 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses

Your Price $5.99

4 Pack of 100 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses

Your Price $3.99

4 Pack of 150 Amp Nickel-Plated MANL Fuse

Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses

Your Price $5.99

2 Pack of 100 Amp Nickel-Plated ANL Fuse

ANL 100A Nickel plated for better power transfer

Your Price $2.99

2 Pack of 200 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 200 Amp ANL Fuses

Your Price $2.99

2 Pack of 300 Amp Nickel-Plated ANL Fuse

Two fuses per order. High quality 300 Amp ANL Fuses

Your Price $2.99

Gauge Reducer, 4 Gauge Input to 8 Gauge Pin

Great for amplifiers that do not accept a large gauge power wire

Your Price $7.99

Gauge Reducer, 1/0 Gauge Input to 4 Gauge Pin

Great for amplifiers that do not accept large gauge power wire

Your Price $7.99

NVX VUBT2

Universal Bluetooth Audio Receiver

Your Price $29.99

NVX XUBT3

Universal Bluetooth Audio Receiver & Volume/Playback Controller Knob

Your Price $49.99

Items we think you might want
VAD8402 main
NVX VAD8402

• RMS: 300 x 2 @ 4 ohms, 420W x 2 @ 2 ohms, Bridged 840W x 1 @ 4 ohm
• Total RMS Power: 840W
• CEA-2006 Compliant
• Efficient Full Range Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

Your Price $189.99

VAD17001 main
NVX VAD17001

• RMS: 800 x 1 @ 4 ohms, 1350W x 1 @ 2 ohms, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 10.1"W x 5.4"D x 2.0H

Your Price $229.99

VAD10001 main
NVX VAD10001

• RMS: 420 x 1 @ 4 ohms, 760W x 1 @ 2 ohms, 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 7.0"W x 5.4"D x 2.0H

Your Price $179.99

VAD11005 main
NVX VAD11005

• 4 ohms: 80 watts x 4 chan. + 350 x 1 chan.
• 2 ohms: 125 watts x 4 chan. + 600 x 1 chan.
• Bridged, 4 ohms: 250 watts x 2 chan. + 600 x 1 chan.
• 5/4/2 Channel Operation

Your Price $269.99

VAD27001 main
NVX VAD27001

• RMS: 1250 x 1 @ 4 ohms, 1950W x 1 @ 2 ohms, 2700W x 1 @ 1 ohm
• Total RMS Power: 2700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 13.7"W x 5.4"D x 2.0H

Your Price $329.99

Product Summary

Manufacturer

Model Number

VAD10004

Weight

10.00lbs

Internal SKU

vad10004

Internal Product ID

158917

Sonic Electronix Wiring Guide

Wiring Diagram Legend

Warning: The image depicted shows the resistance change when wiring multiple subwoofer terminals. Please refer to your subwoofer's owner's manual for the proper wiring of its terminals. Sonic Electronix, Inc. is not responsible for damage caused to your audio system or vehicle due to improper installation. Please call tech support at 1-877-289-7664 if you require additional assistance.

Product Name: NVX VAD10004

Item Added to Cart

NVX VAD10004

1000W RMS Full Range Class D 4-Channel Car/Marine/Powersports Amplifier

$239.99

Keep Shopping

Get Added Peace of Mind with SquareTrade

Why SquareTrade?

  • The #1-Rated Protection Plan
  • 5-Day Service Guarantee & Free Shipping
  • Protection from Normal, Everyday Use
You have added a warranty
$26.99
Add Warranty
3 years of protection

Belva BAK44 4-Channel 4 Gauge Amplifier Installation Kit

Complete 4-Channel CCA 4 Gauge Amp Kit with RCA Cables and Speaker Wire

$34.99

Add
NVX XFLOC4

4-Channel Line Output Converter with Digital Noise Filter + Line Driver

$17.99

Add
NVX XIV45 4-Channel RCA Audio Interconnect Cable

5 Meters (16.4 ft.) 4-Channel RCA Audio Interconnect Cable with Dual Twisted Pair Hyper-Flex Technology

$19.99

Add

Don't see the accessory you're looking for?
View all available accessories for the NVX VAD10004.