Universal-Fit Audio for 2017 Lincoln Navigator

---

•Dual 10" 10W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• Controls Operation of 2 Vehicle Windows
• Automatically Rolls Up Power Windows when the Vehicle's Security System is Armed
• One Touch Operation
• Auxiliary Channel to Vent or Roll Down Windows Completely from the Security System

• BassPro Go Vehicle Installation Kit
• Designed for installing a JBL BassPro Go powered subwoofer in another vehicle
• Vehicle mounting bracket, hardware and harnesses included

• 12" Subwoofer Grille for Rockford Fosgate P2,P3, and P3 Shallow
• Black Gloss Finish
• Mesh Design for Maximum Protection

• 7 Meters
• 12 Gauge Speaker Wire
• High Strand Count for Maximum Flexibility
• 23 Foot Length

• 4 Input Automatic Video Switcher
• Automatic left and right turn signal triggering
• Automatic backup to front camera switching
• Includes 4 camera inputs

• Universal Round Chrome-plated Terminal Cup for Speaker & Subwoofer boxes
• Chrome-plated contacts for optimal signal transfer
• Screw binding posts for a tight secure connection
• Positive (Red) and negative (Black) indicators to ensure proper wiring
• Easy to install and use

• 1-Way Keyless Entry Car Alarm System
• 4-Button Transmitter
• 1/4 mile (1320 feet) range

• Active 2-channel bass restoration processor
• Parametric Bass Controls
• Up to 9.5 Volts of output
• Load selection switch (20, 60, or 20K ohm)
• Remote bass level control included
• Preamp and speaker-level inputs
• Auto turn-on
• LED Clip indicator

• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay

• Stinger DoubleGuard Shock Sensor
• Adjustable Sensitivity
• Wire Harness Included

• Passive Crossover
• 250W Max and 125W RMS
• Dual Woofer Outputs
• Includes Mounting Hardware
• Designed for Punch Pro Midrange Drivers and Tweeters

• 150 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Universal Antenna Extender
• Extends Antenna 6" (.5 ft.)
• Right Angle Male Connector

• Universal 4" Double DIN Installation Trim Kit
• Accommodates ISO double DIN mount
• Painted to match factory dash color
• High-Grade ABS plastic construction
• Factory style texture

• 13" Grille Made Specifically for the JL Audio 13W1v2, 13W3v3, or 13TW5 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• 2-Way Replacement Remote
• 5-Button Transmitter
• 1 Mile Range
• Color: Black

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.51"
• Sensitivity: 84 dB

• Six Piece Installer's Removal Tool Kit
• Durable Nylon Plastic

• 8-way RGB LED Underbody Light Kit
• IP65 water-resistant rating
• Bright CREE light pods
• Controllable LED colors and patterns via Android or iOS app

• Heavy duty terminals for serious applications
• Lightweight 3/4" PVC
• Won't break or leak under high pressure
• 5/16" Bolt Terminal
• All Grade 8 Hardware
• Two Channel

• Gauge Reducer Adapter
• 1/0 Gauge Input to 4 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 1 ohm
• Mount depth: 7.85"
• Sensitivity: 88.30 dB

• Water-resistant RGB LED Controller
• Designed in tandem with RGB MPS app
• Select from 10 speeds and 20 modes
• Sync LED to your music via Smartphone Bluetooth feature
• Compatible with MPS-RGBWWS4 (Sold separately)

• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• Marine-rated Y-connector

• Converts differential video signal to a single-ended composite video signal
• Improves display of OE camera on the aftermarket radio
• Reduces/eliminates video noise
• Two-wire power connection for simple installation
• Great for Ford and Chrysler vehicles and many more

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 5 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• 10-pack 1/0-gauge Heat Shrink
• Protect your cable crimp ends with style
• Color: Black

• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• 2.4" Rear view mirror with front HD camera
• Adjustable 1080P HD front facing camera
• 1-Channel FHD DVR (Digital Video Recorder)
• Built-in motion detection, loop recording, park guide
• Includes built-in G-sensor, mic, and speaker
• Easily straps onto original mirror

• Door Lock Relay Module with Resistors DEI 451M
• Compatible with most Directed Electronics systems
• 3-Pin Plug Interface with DEI system
• Will interface with most electric power door lock systems drawing 30A or less

• 6-Channel 4000 Series RCA Interconnect Cables
• 17 ft. (5.1 meter) Cables
• Stinger Audiophile Grade
• Twisted Pair Construction
• Perfect for 5-Channel Amplifiers
• Durable

• Brass Construction
• 4 GA to 8 GA
• Nickel Plated Finish
• Large Set Screws

• Drive Smarter app compatible
• Preloaded database of red-light and radar cameras
• Built-in GPS
• Works Apple CarPlay and Android Auto
• Next Gen Antenna platform
• Dual Core Processor
• Escort Smart Cord USB Included

• 2-Way Paging Remote Car Starter
• 5-Button LCD Transmitter
• 3000 feet of range (0.56 miles)
• Full high speed 2-way data to data

• Complete 0 Gauge Amplifier Installation Kit
• Designed for Systems up to 3600 Watts
• Includes Everything Needed for Installation
• Premium Power and Ground Cable

• 300A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• Ported enclosure with 2 12" Solo-Baric L7R Series Subwoofer
• 1200 watts RMS (2400 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 15-7/8" H x 15-1/4" W x 20-3/8" W2

• Universal Antenna Extender • Extends Antenna 48" (4 ft.)

• Super Tweeter
• 100 watts RMS Each
• 8 ohm Impedance

• Specifically developed for Hertz MP 70.3 and Hertz MP25.3
• Two-position (0 / +2 dB) switch for tweeter level adjustments
• Pure copper wire low series resistance inductors

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• 1" diaphragm for all Pro Mobile tweeters
• Applicable for models: P1T, P175T, P1SRT
• Does not fit Cerwin Vega P75T and P5T tweeters
• East to install, no cutting or drilling required
• Improves high‑frequency performance

• 1-Way Remote Car Starter
• 5-Button LED Transmitter
• 1500 feet of range (0.28 miles)
• Dual 2-way data port
• Multi-vehicle functionality

• Features easy-to-read 2-3/4" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 36 in. 18 gauge CCA test leads

• 4 Gauge Power Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Wired Remote Control
• Designed for Marine Environments
• Compatible with Kenwood Marine & In-Dash Head Units
• Includes Mounting Hardware

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 800 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• CEA-2015 and BC5W2 Compliant

• 4-Channel SwitchHub Solid-State Relay
• Single 40-amp output and triple 20-amp outputs
• 100-amp combined continuous capacity
• Outputs can be triggered independently

• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in

• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier