Digital Sound Processors for 2018 Mitsubishi Eclipse Cross

---

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 7 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 15 Band Parametric EQ
• 8-Channel RCA Outputs
• Provides up to 2 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments

• 1 channel bass restoration processor and line driver
• Original bass maximizer
• ParaBASS controls
• Selectable PFM Subsonic Filter
• Selectable maximum output voltage
• Bass restoration lighted display
• Dual-function remote level control included

• 2-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• Active 2-channel bass restoration processor
• Parametric Bass Controls
• Up to 9.5 Volts of output
• Load selection switch (20, 60, or 20K ohm)
• Remote bass level control included
• Preamp and speaker-level inputs
• Auto turn-on
• LED Clip indicator

• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 4 band-Band Parametric Marine Equalizer
• 3-zone controller with 2 separate equalizers for tower and cabin zones
• Main input, Auxiliary input, or Bluetooth input
• Master, in-boat and tower zones, and subwoofer volumes
• Includes a talkback microphone for PA communications

• Digital Bass Restoration Processor
• AudioControl ACR-4 bass remote included
• Speaker and line-level (RCA) inputs
• ParaBass equalization circuitry for bass shaping

• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP

• 8-Channel digital signal processo
• 80 total bands of equalization
• TüN software offers quick input/output setup
• 8 RCA inputs or 1 optical input
• Includes DRC-200 digital remote control

• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 6-output channels
• Access four user-adjustable 10-band graphic equalizers
• 30-second single button calibration

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 2-Channel Premium Adjustable Line Output Converter
• 3:1 Step Down With Adjustable Output
• 300w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 8-Channel Digital Sound Processor
• 7-Band parametric equalizer
• Speaker level (high-level) inputs
• Bluetooth for for added control
• High-resolution audio
• Configurable via S8 DSP application/software

• Active line output converter
• All-analog circuit design
• Adaptable to most OEM amplifier outputs
• Input load switching
• Automatic turn-on function

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• 4 band-Band Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 8-Channel Digital Signal Processor
• Designed to integrate with aftermarket or factory OEM systems
• Integrated LCD display and intuitive interface
• Includes 2 audio inputs and 8 independent outputs
• 15-graphic equalizer with separate parametric equalizers

• 4-channel Load Sensing Adaptor
• Fixes a common problem with connecting the FiX-82 to a factory amplifier
• Provides a lower impedance so the factory amplifier's load sensing circuit will allow the FiX-82 to work with it

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• Adjustable Line Output Converter
• Utilize Audio Transformer for Noise Isolation
• Compatible with 2 - 40 watts RMS of Radio Output

• Digital Bass Reconstruction Processor
• Advanced line driver circuitry
• Dash-mount remote control
• Speaker level inputs

• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 80w Maximum Input total (40w per channel)

• 5-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• 7 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 8 volts max preamp outputs
• Subwoofer frequency and level control

• Wet Sounds WS-420 BT 4-Band Parametric Marine Equalizer
• Built-In Bluetooth
• Microphone Turns Your System into a PA
• Compatible with Android and iPhone
• WS-EQ UDM - S Aluminum In Dash EQ Mounting Bracket

• 8-Channel Line Out Converter
• Auxiliary input for iPod, satellite radio, or other audio sources
• Dash control for subwoofer level, auxiliary volume, and source selection

• 5-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Nickel-plated RCA level inputs

• 6-Channel digital sound processor with Automatic Sound Tuning
• 31-Band parametric and graphic equalizer
• Includes remote control and mounting hardware
• Sound tuning with AutoEQ 2.0 on Apple iOS or Android
• Instant precision with center image mode
• Features presets for every playlist

• 4 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 9 volts max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 7 band-Band Parametric Equalizer
• 3 sets of preamp outputs (front, rear and subwoofer)
• 7 volts max preamp outputs
• Subwoofer frequency and level control

• Digital Bass Reconstruction Processor
• Dash-mount remote control
• Speaker level inputs

&bull 4-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• 4 band-Band Graphic Equalizer
• 3 setsof preamp outputs (front, rear and subwoofer)
• 9.5 volts max preamp outputs
• Subwoofer frequency and level control

• Digital bass processor with 2-channel line output converter
• 2-channel RCA input for aftermarket sources
• Selectable signal sensing or direct turn on
• Includes dash mount remote

• 4-Channel input and 8-Channel out digital sound processor
• Bluetooth connectivity via DS18 DSP App
• IOS and Android Compatible
• Durable coated PCB

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 15 Band Parametric EQ
• 6-Channel RCA Outputs
• Provides up to 6.5 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments

• 2-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• 1-Channel Line Out Converter
• Designed to integrate with aftermarket or factory OEM systems
• Maximum Input: 45 watts

• 31-Band graphic EQ
• 6 Inputs, 10 individually assignable outputs
• Complete tuning control via Bluetooth
• Retains voice prompts, parking sensor chimes, and more
• Works with wide range of vehicle application systems

• 8-Channel Speaker Level Inputs
• 8-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 2-Channel Speaker Level Inputs
• 2-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

• 2-Channel Micro Line Output Converter
• Input Circuit corrects crossover distortion
• Individual adjustable outputs
• Auto turn-on via DC offset
• Compact design allows for easy install

• 4-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 4-Channel LOC PRO Series
• 33% Smaller Size Gives More Room For Vital Components
• 55 Watts Per Channel
• Speaker Level Input to RCA Level Output
• Single Dial

• 5 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)

• 2-Channel mini line output converter
• Auto remote amp turn-on
• 6:1 step down with adjustable output
• Handles up to 50 watts of input power per channel

• 2-Channel input and 6-Channel out digital sound processor
• DSP with LCD Screen feature
• Bluetooth connectivity via DS18 DSP
• IOS and Android Compatible

• OEM integration digital signal processor
• 24-bit DSP processor and quad 1/3 octave equalizers
• 8-input and 2-output channels
• User adjustable 10-band graphic equalizer
• 30-second single button calibration

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

• 2-Channel Line Output Converter
• Designed for adding or retaining an amplified system
• Accepts both high-level and low-level inputs
• Remote level controller included

• 8-channel output digital signal processor
• Bluetooth controlled with Bluetooth antenna
• Output limiter LED lights
• Power connector with two remote output trigger wires
• High-level (speaker level) inputs
• Controllable via the free DSP mobile application

• LPH speaker extension harness
• Compatible plugs and color-coded wires
• Length: 17 feet