Universal-Fit Audio for 2025 Ford Ranger

---

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• Full Frame License Plate Frame Camera Bracket
• Works exclusively with CAM-300 and CAM-400
• Powder coated black metal finish
• Hidden wiring for easy installation

• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay

• 6-Channel 4000 Series RCA Interconnect Cables
• 17 ft. (5.1 meter) Cables
• Stinger Audiophile Grade
• Twisted Pair Construction
• Perfect for 5-Channel Amplifiers
• Durable

• 80 watts x 4 channel @ 4 ohm
• 125 watts x 4 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Composite RCA to direct camera adaptor
• Compatible with all Alpine stereos with direct camera input
• Ideal for adding any aftermarket camera
• Plug and play, no cutting or splicing required

• 350 watts x 2 channel @ 4 ohm
• 510 watts x 2 channel @ 2 ohm
• 900 watts x 2 channel @ 1 ohm
• Bridged: 1020 watts x 1 channel @ 4 ohm
• 1000 watts @ 2 ohm
• Total RMS Power: 900 watts
• Class D 1 ohm Stable 2-Channel-Channel Amplifier

&bull Pair of Bass Blockers For 4" Speakers
• Blocks 0-1200 Hz @ 4 Ohm
• Blocks 0-600 Hz @ 8 Ohm
• Encased in Durable Plastic Casing
• Handles Power up to 50 Watts

• 11" Spare Tire Subwoofer System
• Built-In Class D Amplifier
• Top-mount amplifier controls
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Gauge Reducer Adapter
• 1/0 Gauge Input to 4 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• Peak Power: 2400 watts
• RMS Power: 1200 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 7.02"
• Sensitivity: 85 dB (1W/1m)

• Six Piece Installer's Removal Tool Kit
• Durable Nylon Plastic

• 420 watts x 2 channel @ 4 ohm
• 630 watts x 2 channel @ 2 ohm
• Bridged: 1260 watts x 1 channel @ 4 ohm
• Total RMS Power: 1260 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• 8.3 Megapixel Recording (front cam)
• 3.7 Megapixel Recording (rear cam)
• 3.0" LCD Display (front cam only)
• Integrated GPS system
• Touch panel control

• 3.5" Pro Audio Bullet Tweeters
• 240 watts Peak Each
• 120 watts RMS Each
• 4 ohm Impedance

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Compatible for Sundown SA 12V2 subwoofers (Sold separately)

• For positive or negative battery post use
• Add a Post System
• >Solid brass construction

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.51"
• Sensitivity: 84 dB

• Audio Sensor That Detects Attempts to Tamper with or Break Your Vehicle's Glass

• 500-amp Relay and Battery Isolator
• High current isolation relay designed for adding a secondary battery
• Prevents primary battery discharge when the vehicle engine is off
• Maximum Contact Rating: 500 amps
• Mechanical Life Cycle: 100000

• Fully Active, 2-Channel Remote Level Control and Line Driver with Pass-Through Outputs
• Minimizes Unwanted Noise
• Active Circuitry
• Control Knob
• Pass-Through Connection

• Features easy-to-read 2-3/4" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 36 in. 18 gauge CCA test leads

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D amplifier
• Variable bass boost
• Speaker-level inputs

• Prevents Wire Splitting when using Setscrew Terminals
• Fits 1/0 Gauge AWG Wire
• Includes (4) 0 Gauge Ferrules and (4) Heat Shrink

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• Wired Remote Control
• Designed for Marine Environments
• Compatible with Kenwood Marine & In-Dash Head Units
• Includes Mounting Hardware

Universal Round Chrome-plated Terminal Cup for Speaker / Subwoofer Boxes
• Chrome-Plated Contacts
• Screw Binding Posts
• Easy to Install and Use

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 5/6-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• Universal spacers for car speakers
• Includes 2 spacers (screws not included)
• Compatible Speaker Size: 6.5"
• Spacer Thickness: 0.5"

• Brass Construction
• 4 GA to 8 GA
• Nickel Plated Finish
• Large Set Screws

• Remote Turn-On Module
• Used To Turn On Remote Amplifiers
• 2 Second Delay To Prevent Turn-On Noise
• Supplies 2 Amps Of Current
• Can Drive Multiple Amps Or A Power Antenna
• Activated By Low Level Trigger Lead

• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• 0.77 cu ft Sealed Enclosure
• 3/4" Medium Density Fiberboard Construction
• Durable Black Carpeting
• Pre-Lined with Poly-Fil
• Gold Speaker Terminals

• Works with most 5 1/4", 6 1/2" and 6 3/4" speakers
• Gives 1 inch extra depth

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

• Replacement Amplified Hide-Away Antenna for AM/FM Bands
• Active Magnetic-Type Antenna
• Works on the Magnetic Field

• 8-way RGB LED Underbody Light Kit
• IP65 water-resistant rating
• Bright CREE light pods
• Controllable LED colors and patterns via Android or iOS app

• Check Gain Overlap Settings
• Input Voltage Capacity Raised to 200Vrms
• RMS AC Voltmeter Built-in

• Wired Bass Remote Controller
• Compatible with select JL Audio HD, MHD and XDM amplifiers
• Flush-mountable installation
• Color: Black

• BassPro Go Vehicle Installation Kit
• Designed for installing a JBL BassPro Go powered subwoofer in another vehicle
• Vehicle mounting bracket, hardware and harnesses included

• Red LED Voltage Display
• Universal Mounting
• Monitor System Voltage
• Easy Installation

• Drive Smarter app compatible
• Preloaded database of red-light and radar cameras
• Built-in GPS
• Works Apple CarPlay and Android Auto
• Next Gen Antenna platform
• Dual Core Processor
• Escort Smart Cord USB Included

• Universal fit
• Supports 4 cameras, front, rear, back and sides
• Works on factory and aftermarket radios, factory radios require interface
• Automatically activates when put in reverse or turn signals activated

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

Stacking Hardware for Three Slash v2 Amplifiers
• Made With JL Audio High Quality
• Precision Machined
• Colored Black

• Video switch with trigger wires
• 4 camera input and 1 video output
• 4 trigger wires for each camera

• 1.38 square feet sound deadening kit
• Solid black design for any stealth car audio installation
• Material Used: Vibration Dampener
• Material Thickness: 0.091
• Install Location: Speaker
• Pack includes two 10" x 10" sheets

• Complete 0 Gauge Amplifier Installation Kit
• Designed for Systems up to 3600 Watts
• Includes Everything Needed for Installation
• Premium Power and Ground Cable

• Amplified AM/FM Glass Mount Antenna
• Slim Style for Compact Installation
• Mounts in Glass or Windshield
• 12 Foot Cable Length

• 10" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: .65 cubic feet
• Premium Black Carpet with Black NVX Logo

• Universal 4" Double DIN Installation Trim Kit
• Accommodates ISO double DIN mount
• Painted to match factory dash color
• High-Grade ABS plastic construction
• Factory style texture

• Spade Terminals • 8 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Double-DIN Dash Kit
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB