Universal-Fit Audio for 1986 Dodge Colt

---

• 13" Grille Made Specifically for the JL Audio 13W1v2, 13W3v3, or 13TW5 Sub
• Provides the Best Protection Possible
• Top-Notch JL Audio Quality
• Metal Mesh Grille Painted Black

• 1.38 square feet sound deadening kit
• Solid black design for any stealth car audio installation
• Material Used: Vibration Dampener
• Material Thickness: 0.091
• Install Location: Speaker
• Pack includes two 10" x 10" sheets

•Dual 10" 10W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 3.50 cubic feet
• Compatible for Sundown SA 12V2 subwoofers (Sold separately)

• Audio Sensor That Detects Attempts to Tamper with or Break Your Vehicle's Glass

• 7 band-Band Graphic Equalizer
• 3 Sets of preamp outputs (front, rear, and subwoofer)
• 8 volts Max preamp outputs
• Subwoofer frequency and level control
• Gold-plated RCA level inputs

• For High-Powered systems
• Bright Blue LED Voltage Display
• Improves Bass Response (SPL)

• 10" Amplified Loaded Subwoofer System
• 180 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• Universal Rear View Backup Camera
• Mounting Style: Full License Plate Frame
• Resolution: 720 x 480 
• Waterproof: Yes
• Nightvision: Infrared LED's

• Complete 0 Gauge Amplifier Installation Kit
• Designed for Systems up to 3600 Watts
• Includes Everything Needed for Installation
• Premium Power and Ground Cable

• 12" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

• 4 AWG Power, Ground and Remote Quick Disconnect
• Rated up to 120 Amps
• Anderson connectors
• Makes it easy to remove amps, batteries and other equipment quickly
• Includes male and female quick disconnects

• Active 2-channel bass restoration processor
• Parametric Bass Controls
• Up to 9.5 Volts of output
• Load selection switch (20, 60, or 20K ohm)
• Remote bass level control included
• Preamp and speaker-level inputs
• Auto turn-on
• LED Clip indicator

• Premium matrix digital sound processor
• 8-Channel preamp input and 10-Channel preamp output
• 30-Band equalizer for adjusting gain, delay, and polarity
• High-pass, low-pass and band-pass crossovers
• Features GTO signal sensing, MILC clip detection, and AccuBASS
• Also features signal summing and signal delay

• Passive Crossover
• 250W Max and 125W RMS
• Dual Woofer Outputs
• Includes Mounting Hardware
• Designed for Punch Pro Midrange Drivers and Tweeters

• Six Piece Installer's Removal Tool Kit
• Durable Nylon Plastic

• 4 Gauge Solid Copper Ring Terminals
• Shrink Tubing
• Pure Copper with Nickel plating for optimal Current transfer
• Color: Black
• Count: 4

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.51"
• Sensitivity: 84 dB

• BassPro Go Vehicle Installation Kit
• Designed for installing a JBL BassPro Go powered subwoofer in another vehicle
• Vehicle mounting bracket, hardware and harnesses included

• Prevents Primary Battery Discharge
• Maximum Current Transfer
• Ideal for 2nd Audio Battery Isolation from Vehicle Systems
• 500A Constant/ 900A Peak

• Remote Controller with Fast Charge USB for inverters
• Built-in bright blue backlit LCD text display
• Compatible with select Cobra inverters
• Features 4 mounting options
• Mounting hardware included

• Controls Operation of 2 Vehicle Windows
• Automatically Rolls Up Power Windows when the Vehicle's Security System is Armed
• One Touch Operation
• Auxiliary Channel to Vent or Roll Down Windows Completely from the Security System

• 80 watts x 4 channel + 350 watts x 1 channel @ 4 ohm
• 125 watts x 4 channel + 600 watts x 1 channel @ 2 ohm
• Bridged: 250 watts x 2 channel @ 4 ohm + 600 watts x 1 channel @ 2 ohm
• Total RMS Power: 1100 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• Features Qualcomm Quick Charge 3.0
• Charges two devices simultaneously at 5V (2.1A)
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D amplifier
• Variable bass boost
• Speaker-level inputs

• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Mineral-Filled Polypropylene Cone
• Butyl Rubber Surround
• Mount depth: 7.52"
• Sensitivity: 85.4 dB

• Ported enclosure with 2 12" Solo-Baric L7R Series Subwoofer
• 1200 watts RMS (2400 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 15-7/8" H x 15-1/4" W x 20-3/8" W2

• Gauge Reducer Adapter
• 1/0 Gauge Input to 4 Gauge Pin
• Deep Wire Recesses
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• Universal Antenna Extender • Extends Antenna 48" (4 ft.)

• 2-Channel LOC PRO Series
• Remote Turn on Wire
• Single Dial
• Signal-Sensing Circuit
• Surface Mount Construction
• Level Gain Adjustment

• Direct Power Smartcord for Escort Radar Detectors
• Blue LED Light Notifies You of Alerts
• Built-in Mute Button to Silence Audio Alerts
• Works with all current generation escort windshield mounted detectors

• High Current Transfer
• Stinger Select 200 Amp Circuit Breaker
• Manual Trip Reset
• High Current Protection

• Universal Antenna Extender
• Extends Antenna 6" (.5 ft.)
• Right Angle Male Connector

• Peak Power: 2400 watts
• RMS Power: 1200 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 7.02"
• Sensitivity: 85 dB (1W/1m)

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 800 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• CEA-2015 and BC5W2 Compliant

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 200 watts x 2 channel @ 4 ohm
• Total RMS Power: 400 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Composite RCA to direct camera adaptor
• Compatible with all Alpine stereos with direct camera input
• Ideal for adding any aftermarket camera
• Plug and play, no cutting or splicing required

• Slider mounting bracket for Stealth HD and XT soundbars
• CNC'd from billet aluminum for extra durability
• Allows adjusting of soundbar mounting width
• Includes brackets, bolts, lock-washers, and flat-washers (2 each)

• Heavy duty terminals for serious applications
• Lightweight 3/4" PVC
• Won't break or leak under high pressure
• 5/16" Bolt Terminal
• All Grade 8 Hardware
• Two Channel

• Stock Voltage Battery Charger
• Recommended for Nano, Retro Pro and No-Li batteries
• Designed for charging 15 volts batteries
• Features LED function display type

• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB

• 10" Subwoofer Grille
• Steel Mesh Material
• For Use with TW3 Series Subwoofers
• Powder Coated Satin Black Finish

• Wired Remote Control
• Designed for Marine Environments
• Compatible with Kenwood Marine & In-Dash Head Units
• Includes Mounting Hardware

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1500 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 100 amp fuse
• CEA-2015 and BC5W2 Compliant

• 1-Way Keyless Entry Car Alarm System
• 4-Button Transmitter
• 1/4 mile (1320 feet) range

• 490 watts x 1 channel @ 4 ohm
• 780 watts x 1 channel @ 2 ohm
• 1300 watts x 1 channel @ 1 ohm
• Total RMS Power: 1300 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Pressed Paper Cone
• Foam Surround
• Impedance: Dual 1 ohm
• Mount depth: 7.85"
• Sensitivity: 88.30 dB

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• Universal Round Chrome-plated Terminal Cup for Speaker & Subwoofer boxes
• Chrome-plated contacts for optimal signal transfer
• Screw binding posts for a tight secure connection
• Positive (Red) and negative (Black) indicators to ensure proper wiring
• Easy to install and use

• 10 farad Hybrid Digital Capacitor
• Increases quality of sound
• Increases level of bass
• Platinum plated

• 3.5" Pro Audio Bullet Tweeters
• 240 watts Peak Each
• 120 watts RMS Each
• 4 ohm Impedance

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 1.75 cubic feet
• Compatible for Sundown SA12V2 subwoofers (Sold separately)

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB

• Designed to connect in-dash receiver wiring harness to vehicle wiring harness

• 350 watts x 2 channel @ 4 ohm
• 510 watts x 2 channel @ 2 ohm
• 900 watts x 2 channel @ 1 ohm
• Bridged: 1020 watts x 1 channel @ 4 ohm
• 1000 watts @ 2 ohm
• Total RMS Power: 900 watts
• Class D 1 ohm Stable 2-Channel-Channel Amplifier